CONFIG_UNIPHIER_SERIAL has been moved to Kconfig and it is defined in ./.config but not in spl/.config, so pin_init() should be called from the normal image so that UART works correctly.
Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---
arch/arm/cpu/armv7/uniphier/Kconfig | 4 ++++ arch/arm/cpu/armv7/uniphier/board_postclk_init.c | 3 ++- arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile | 5 +++-- arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 4 ++-- arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile | 5 +++-- include/configs/uniphier-common.h | 4 ++-- 6 files changed, 16 insertions(+), 9 deletions(-)
diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig index 011c6d9..36b7f11 100644 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -32,6 +32,10 @@ config CMD_PINMON The boot mode pins are latched when the system reset is deasserted and determine which device the system should load a boot image from.
+config SOC_INIT + bool + default SPL_BUILD + config DRAM_INIT bool default SPL_BUILD diff --git a/arch/arm/cpu/armv7/uniphier/board_postclk_init.c b/arch/arm/cpu/armv7/uniphier/board_postclk_init.c index 3db336f..89e44bb 100644 --- a/arch/arm/cpu/armv7/uniphier/board_postclk_init.c +++ b/arch/arm/cpu/armv7/uniphier/board_postclk_init.c @@ -20,6 +20,7 @@ void clkrst_init(void);
int board_postclk_init(void) { +#ifdef CONFIG_SOC_INIT bcu_init();
sbc_init(); @@ -37,7 +38,7 @@ int board_postclk_init(void) clkrst_init();
led_write(B, 2, , ); - +#endif pin_init();
led_write(B, 3, , ); diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile index e9e9b32..f0c66c6 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-$(CONFIG_BOARD_POSTCLK_INIT) += bcu_init.o sbc_init.o sg_init.o \ - pll_init.o clkrst_init.o pinctrl.o +obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ + clkrst_init.o +obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile index 272fecc..0e8f4c5 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -6,6 +6,6 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-$(CONFIG_BOARD_POSTCLK_INIT) += sbc_init.o sg_init.o \ - pll_init.o clkrst_init.o pinctrl.o +obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o +obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile index e9e9b32..f0c66c6 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-$(CONFIG_BOARD_POSTCLK_INIT) += bcu_init.o sbc_init.o sg_init.o \ - pll_init.o clkrst_init.o pinctrl.o +obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ + clkrst_init.o +obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier-common.h index 45becc1..7c4dba0 100644 --- a/include/configs/uniphier-common.h +++ b/include/configs/uniphier-common.h @@ -248,9 +248,9 @@ are defined. Select only one of them."
#define CONFIG_SYS_TEXT_BASE 0x84000000
-#if defined(CONFIG_SPL_BUILD) #define CONFIG_BOARD_POSTCLK_INIT -#else + +#ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT #endif