we load the secondary stage u-boot image from NAND to system memory by nand_load, but we did not flush d-cache to memory, not invalidate i-cache before we jump to RAM. when the system is cache enable and the TLB/page attribute of system memory is cacheable, it will cause issue.
- 83xx family is using the d-cache lock, so all of d-cache access is cache-inhibited. so you can't see the issue. - 85xx family is using d-cache, i-cache enable, partial cache lock. you will see the issue.
The patch fix the cache issue.
Signed-off-by: Dave Liu daveliu@freescale.com --- Stefan,
I'm not familiar with ppc4xx, could you workout one patch for nand_boot.c?
Thanks, Dave
nand_spl/board/freescale/mpc8313erdb/Makefile | 6 +++++- nand_spl/nand_boot_fsl_elbc.c | 5 +++++ 2 files changed, 10 insertions(+), 1 deletions(-)
diff --git a/nand_spl/board/freescale/mpc8313erdb/Makefile b/nand_spl/board/freescale/mpc8313erdb/Makefile index 3da1b1f..1a8f6ff 100644 --- a/nand_spl/board/freescale/mpc8313erdb/Makefile +++ b/nand_spl/board/freescale/mpc8313erdb/Makefile @@ -34,7 +34,8 @@ AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL
SOBJS = start.o ticks.o -COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o nand_init.o time.o +COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o nand_init.o \ + time.o cache.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) @@ -79,6 +80,9 @@ $(obj)ns16550.c: $(obj)nand_init.c: ln -sf $(SRCTREE)/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
+$(obj)cache.c: + ln -sf $(SRCTREE)/lib_ppc/cache.c $(obj)cache.c + $(obj)time.c: ln -sf $(SRCTREE)/lib_ppc/time.c $(obj)time.c
diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c index 4a961ea..0d0c44e 100644 --- a/nand_spl/nand_boot_fsl_elbc.c +++ b/nand_spl/nand_boot_fsl_elbc.c @@ -143,6 +143,11 @@ void nand_boot(void) * Jump to U-Boot image */ puts("transfering control\n"); + /* + * Clean d-cache and invalidate i-cache, to + * make sure that no stale data is executed. + */ + flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE); uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; uboot(); }