On 1 July 2015 at 03:44, Przemyslaw Marczak p.marczak@samsung.com wrote:
Hello Simon,
On 06/23/2015 11:39 PM, Simon Glass wrote:
It is a common requirement to update some PMIC registers. Provide some simple convenience functions to do this.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2: None
drivers/power/pmic/pmic-uclass.c | 32 ++++++++++++++++++++++++++++++++ include/power/pmic.h | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+)
diff --git a/drivers/power/pmic/pmic-uclass.c b/drivers/power/pmic/pmic-uclass.c index 40b5135..dbab3e3 100644 --- a/drivers/power/pmic/pmic-uclass.c +++ b/drivers/power/pmic/pmic-uclass.c @@ -139,6 +139,38 @@ int pmic_write(struct udevice *dev, uint reg, const uint8_t *buffer, int len) return ops->write(dev, reg, buffer, len); }
+int pmic_reg_read(struct udevice *dev, uint reg) +{
u8 byte;int ret;ret = pmic_read(dev, reg, &byte, 1);debug("%s: reg=%x, value=%x\n", __func__, reg, byte);return ret ? ret : byte;+}
+int pmic_reg_write(struct udevice *dev, uint reg, uint value) +{
u8 byte = value;debug("%s: reg=%x, value=%x\n", __func__, reg, value);return pmic_read(dev, reg, &byte, 1);+}
+int pmic_clrsetbits(struct udevice *dev, uint reg, uint clr, uint set) +{
u8 byte;int ret;ret = pmic_reg_read(dev, reg);if (ret < 0)return ret;byte = (ret & ~clr) | set;return pmic_reg_write(dev, reg, byte);+}
- UCLASS_DRIVER(pmic) = { .id = UCLASS_PMIC, .name = "pmic",
diff --git a/include/power/pmic.h b/include/power/pmic.h index eb152ef..6ba4b6e 100644 --- a/include/power/pmic.h +++ b/include/power/pmic.h @@ -264,6 +264,40 @@ int pmic_reg_count(struct udevice *dev); */ int pmic_read(struct udevice *dev, uint reg, uint8_t *buffer, int len); int pmic_write(struct udevice *dev, uint reg, const uint8_t *buffer, int len);
+/**
- pmic_reg_read() - read a PMIC register value
- @dev: PMIC device to read
- @reg: Register to read
- @return value read on success or negative value of errno.
- */
+int pmic_reg_read(struct udevice *dev, uint reg);
+/**
- pmic_reg_write() - write a PMIC register value
- @dev: PMIC device to write
- @reg: Register to write
- @value: Value to write
- @return 0 on success or negative value of errno.
- */
+int pmic_reg_write(struct udevice *dev, uint reg, uint value);
+/**
- pmic_clrsetbits() - clear and set bits in a PMIC register
- This reads a register, optionally clears some bits, optionally sets
some
- bits, then writes the register.
- @dev: PMIC device to update
- @reg: Register to update
- @clr: Bit mask to clear (set those bits that you want cleared)
- @set: Bit mask to set (set those bits that you want set)
- @return 0 on success or negative value of errno.
- */
+int pmic_clrsetbits(struct udevice *dev, uint reg, uint clr, uint set);
#endif /* CONFIG_DM_PMIC */
#ifdef CONFIG_POWER
Tested on:
- Odroid U3 (odroid_defconfig)
- Sandbox - ut pmic/regulator
Tested-by: Przemyslaw Marczak p.marczak@samsung.com Acked-by: Przemyslaw Marczak p.marczak@samsung.com
Best regards,
Przemyslaw Marczak Samsung R&D Institute Poland Samsung Electronics p.marczak@samsung.com
Applied to u-boot-dm.