I have x86 host and PPC440E target. I tried to step through code, but looks like my GDB version is wrong. Do you have any good HOWTO for such a setup with BDI2000 (it' 1st time I am using it)?
Thanks,
Leonid.
-----Original Message----- From: u-boot-users-bounces@lists.sourceforge.net [mailto:u-boot-users-bounces@lists.sourceforge.net] On Behalf Of mitsy Sent: Wednesday, July 19, 2006 12:43 PM To: u-boot-users@lists.sourceforge.net Subject: [U-Boot-Users] No serial output from mips/au1550
I'm using BDI2000 to debug my version of u-boot, which is still under development. I can step through the code via telnet with bdi, but I'm not seeing any output on serial port when it's supposed to be writing stuff out. The only time I see anything on the serial console is when I reset the target, before running anything. It spits put some garbage.
Within board_init_f(), both init_baudrate and serial_init seem to be running fine. Has anybody experienced something similar to this? If so, what am I missing to make it work?
TIA!
------------------------------------------------------------------------ - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=D... V _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users