Hi Matt,
On Feb 19, 2015, at 20:22 , Matt Reimer mreimer@sdgsystems.com wrote:
Fix bus width switching from 8-bit mode down to 4-bit or 1-bit modes on Samsung SoCs using SDHCI_QUIRK_USE_WIDE8. These SoCs report controller version 2.0 yet they support 8-bit bus widths. If 8-bit mode was previously enabled and then an operation like "mmc dev" caused a switch back down to 4-bit or 1-bit mode, WIDE8 was left set, causing failures.
This problem was manifested by "mmc dev" timing out.
Signed-off-by: Matt Reimer mreimer@sdgsystems.com
drivers/mmc/sdhci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index de88e19..82d7984 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -374,7 +374,8 @@ static void sdhci_set_ios(struct mmc *mmc) (host->quirks & SDHCI_QUIRK_USE_WIDE8)) ctrl |= SDHCI_CTRL_8BITBUS; } else {
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
if ((SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) ||(host->quirks & SDHCI_QUIRK_USE_WIDE8)) ctrl &= ~SDHCI_CTRL_8BITBUS;-- 1.7.9.5
Good catch, applied, thanks.
— Pantelis