Hi Kever,
On 17 February 2017 at 01:07, Kever Yang kever.yang@rock-chips.com wrote:
Add rk3328 clock driver and cru structure definition.
Signed-off-by: William Zhang william.zhang@rock-chips.com Signed-off-by: Kever Yang kever.yang@rock-chips.com
arch/arm/include/asm/arch-rockchip/cru_rk3328.h | 65 +++ drivers/clk/rockchip/Makefile | 1 + drivers/clk/rockchip/clk_rk3328.c | 607 ++++++++++++++++++++++++ 3 files changed, 673 insertions(+) create mode 100644 arch/arm/include/asm/arch-rockchip/cru_rk3328.h create mode 100644 drivers/clk/rockchip/clk_rk3328.c
diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3328.h b/arch/arm/include/asm/arch-rockchip/cru_rk3328.h new file mode 100644 index 0000000..089c4ca --- /dev/null +++ b/arch/arm/include/asm/arch-rockchip/cru_rk3328.h @@ -0,0 +1,65 @@ +/*
- (C) Copyright 2016 Rockchip Electronics Co., Ltd
- SPDX-License-Identifier: GPL-2.0+
- */
+#ifndef __ASM_ARCH_CRU_RK3328_H_ +#define __ASM_ARCH_CRU_RK3328_H_
+#include <common.h>
+struct rk3328_cru {
u32 apll_con[5];u32 reserved1[3];u32 dpll_con[5];u32 reserved2[3];u32 cpll_con[5];u32 reserved3[3];u32 gpll_con[5];u32 reserved4[3];u32 mode_con;u32 misc;u32 reserved5[2];u32 glb_cnt_th;u32 glb_rst_st;u32 glb_srst_snd_value;u32 glb_srst_fst_value;u32 npll_con[5];u32 reserved6[(0x100-0xb4)/4];u32 clksel_con[53];u32 reserved7[(0x200-0x1d4)/4];u32 clkgate_con[29];u32 reserved8[3];u32 ssgtbl[32];u32 softrst_con[12];u32 reserved9[(0x380-0x330)/4];u32 sdmmc_con[2];u32 sdio_con[2];u32 emmc_con[2];u32 sdmmc_ext_con[2];+}; +check_member(rk3328_cru, sdmmc_ext_con[1], 0x39c); +#define MHz 1000000 +#define KHz 1000 +#define OSC_HZ (24 * MHz) +#define APLL_HZ (600 * MHz) +#define GPLL_HZ (576 * MHz) +#define CPLL_HZ (594 * MHz)
+#define CLK_CORE_HZ (600 * MHz) +#define ACLKM_CORE_HZ (300 * MHz) +#define PCLK_DBG_HZ (300 * MHz)
+#define PERIHP_ACLK_HZ (144000 * KHz) +#define PERIHP_HCLK_HZ (72000 * KHz) +#define PERIHP_PCLK_HZ (72000 * KHz)
+#define PWM_CLOCK_HZ (74 * MHz)
+enum apll_frequencies {
APLL_816_MHZ,APLL_600_MHZ,+};
+#endif /* __ASM_ARCH_CRU_RK3328_H_ */ diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile index 1f8e417..c4e81e9 100644 --- a/drivers/clk/rockchip/Makefile +++ b/drivers/clk/rockchip/Makefile @@ -6,4 +6,5 @@
obj-$(CONFIG_ROCKCHIP_RK3036) += clk_rk3036.o obj-$(CONFIG_ROCKCHIP_RK3288) += clk_rk3288.o +obj-$(CONFIG_ROCKCHIP_RK3328) += clk_rk3328.o obj-$(CONFIG_ROCKCHIP_RK3399) += clk_rk3399.o diff --git a/drivers/clk/rockchip/clk_rk3328.c b/drivers/clk/rockchip/clk_rk3328.c new file mode 100644 index 0000000..e075414 --- /dev/null +++ b/drivers/clk/rockchip/clk_rk3328.c @@ -0,0 +1,607 @@ +/*
- (C) Copyright 2016 Rockchip Electronics Co., Ltd
- SPDX-License-Identifier: GPL-2.0
- */
+#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/cru_rk3328.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> +#include <clk-uclass.h> +#include <dm.h> +#include <dm/lists.h> +#include <dt-bindings/clock/rk3328-cru.h> +#include <errno.h> +#include <syscon.h>
Can you please tidy up the order here? asm/ should go after the normal headers, and dm/lists and dt-bindings/ afer that
+DECLARE_GLOBAL_DATA_PTR;
+struct rk3328_clk_priv {
struct rk3328_cru *cru;ulong rate;+};
[..]
+#define I2C_CLK_REG_MASK(bus) \
(CLK_I2C_DIV_CON_MASK << \CLK_I2C ##bus## _DIV_CON_SHIFT | \CLK_I2C_PLL_SEL_MASK << \CLK_I2C ##bus## _PLL_SEL_SHIFT)+#define (bus, clk_div) \
((clk_div - 1) << \CLK_I2C ##bus## _DIV_CON_SHIFT | \CLK_I2C_PLL_SEL_GPLL << \CLK_I2C ##bus## _PLL_SEL_SHIFT)+#define I2C_CLK_DIV_VALUE(con, bus) \
(con >> CLK_I2C ##bus## _DIV_CON_SHIFT) & \CLK_I2C_DIV_CON_MASK;
Can we drop these three and instead write them out below?
+#define VCO_MAX_KHZ (3200 * (MHz / KHz)) +#define VCO_MIN_KHZ (800 * (MHz / KHz)) +#define OUTPUT_MAX_KHZ (3200 * (MHz / KHz)) +#define OUTPUT_MIN_KHZ (16 * (MHz / KHz))
+/*
- the div restructions of pll in integer mode, these are defined in
- CRU_*PLL_CON0 or PMUCRU_*PLL_CON0
- */
+#define PLL_DIV_MIN 16 +#define PLL_DIV_MAX 3200
[...]
+static ulong rk3328_mmc_get_clk(struct rk3328_cru *cru, uint clk_id) +{
u32 div, con, con_id;switch (clk_id) {case HCLK_SDMMC:con_id = 30;break;case HCLK_EMMC:con_id = 32;break;default:return -EINVAL;}con = readl(&cru->clksel_con[con_id]);div = (con & CLK_EMMC_DIV_CON_MASK) >> CLK_EMMC_DIV_CON_SHIFT;if ((con & CLK_EMMC_PLL_MASK) >> CLK_EMMC_PLL_SHIFT== CLK_EMMC_PLL_SEL_24M)return DIV_TO_RATE(24*1024*1024, div);
Perhaps should have a #define for the 24MHz oscillator?
elsereturn DIV_TO_RATE(GPLL_HZ, div);+}
+static ulong rk3328_mmc_set_clk(struct rk3328_cru *cru,
ulong clk_id, ulong set_rate)+{
int src_clk_div;u32 con_id;switch (clk_id) {case HCLK_SDMMC:con_id = 30;break;case HCLK_EMMC:con_id = 32;break;default:return -EINVAL;}/* Select clk_sdmmc/emmc source from GPLL by default */src_clk_div = GPLL_HZ / set_rate;if (src_clk_div > 127) {/* use 24MHz source for 400KHz clock */src_clk_div = 24*1024*1024 / set_rate;rk_clrsetreg(&cru->clksel_con[con_id],CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK,CLK_EMMC_PLL_SEL_24M << CLK_EMMC_PLL_SHIFT |(src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT);} else {rk_clrsetreg(&cru->clksel_con[con_id],CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK,CLK_EMMC_PLL_SEL_GPLL << CLK_EMMC_PLL_SHIFT |(src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT);}return rk3328_mmc_get_clk(cru, clk_id);+}
+static ulong rk3328_pwm_get_clk(struct rk3328_cru *cru) +{
u32 div, con;con = readl(&cru->clksel_con[24]);div = (con & CLK_PWM_DIV_CON_MASK) >> CLK_PWM_DIV_CON_SHIFT;return DIV_TO_RATE(GPLL_HZ, div);+}
+static ulong rk3328_pwm_set_clk(struct rk3328_cru *cru, uint hz) +{
u32 div = GPLL_HZ / hz;rk_clrsetreg(&cru->clksel_con[24],CLK_PWM_PLL_SEL_MASK | CLK_PWM_DIV_CON_MASK,CLK_PWM_PLL_SEL_GPLL << CLK_PWM_PLL_SEL_SHIFT |(div - 1) << CLK_PWM_DIV_CON_SHIFT);return DIV_TO_RATE(GPLL_HZ, div);+}
+static ulong rk3328_clk_get_rate(struct clk *clk) +{
struct rk3328_clk_priv *priv = dev_get_priv(clk->dev);ulong rate = 0;switch (clk->id) {case 0 ... 29:return 0;case HCLK_SDMMC:case HCLK_EMMC:rate = rk3328_mmc_get_clk(priv->cru, clk->id);break;case SCLK_I2C0:case SCLK_I2C1:case SCLK_I2C2:case SCLK_I2C3:rate = rk3328_i2c_get_clk(priv->cru, clk->id);break;case SCLK_PWM:rate = rk3328_pwm_get_clk(priv->cru);break;default:return -ENOENT;}return rate;+}
+static ulong rk3328_clk_set_rate(struct clk *clk, ulong rate) +{
struct rk3328_clk_priv *priv = dev_get_priv(clk->dev);ulong ret = 0;switch (clk->id) {case 0 ... 29:return 0;case HCLK_SDMMC:case HCLK_EMMC:ret = rk3328_mmc_set_clk(priv->cru, clk->id, rate);break;case SCLK_I2C0:case SCLK_I2C1:case SCLK_I2C2:case SCLK_I2C3:ret = rk3328_i2c_set_clk(priv->cru, clk->id, rate);break;case SCLK_PWM:ret = rk3328_pwm_set_clk(priv->cru, rate);break;default:return -ENOENT;}return ret;+}
+static struct clk_ops rk3328_clk_ops = {
.get_rate = rk3328_clk_get_rate,.set_rate = rk3328_clk_set_rate,+};
+void *rockchip_get_cru(void) +{
struct udevice *dev;fdt_addr_t *addr;int ret;ret = uclass_get_device_by_name(UCLASS_CLK, "clk_rk3328", &dev);
Would it be possible to use uclass_get_device_by_driver()? Also, if this function is to be exported, it really should be in arch/arm/mach-rockchip somewhere.
if (ret)return ERR_PTR(ret);addr = dev_get_addr_ptr(dev);if ((fdt_addr_t)addr == FDT_ADDR_T_NONE)return ERR_PTR(-EINVAL);return addr;+}
+static int rk3328_clk_probe(struct udevice *dev) +{
struct rk3328_clk_priv *priv = dev_get_priv(dev);rkclk_init(priv->cru);return 0;+}
+static int rk3328_clk_ofdata_to_platdata(struct udevice *dev) +{
struct rk3328_clk_priv *priv = dev_get_priv(dev);priv->cru = (struct rk3328_cru *)dev_get_addr(dev);return 0;+}
+static int rk3328_clk_bind(struct udevice *dev) +{
int ret;/* The reset driver does not have a device node, so bind it here */ret = device_bind_driver(gd->dm_root, "rk3328_sysreset", "reset", &dev);if (ret)printf("Warning: No RK3328 reset driver: ret=%d\n", ret);return ret;+}
+static const struct udevice_id rk3328_clk_ids[] = {
{ .compatible = "rockchip,rk3328-cru" },{ }+};
+U_BOOT_DRIVER(clk_rk3328) = {
.name = "clk_rk3328",.id = UCLASS_CLK,.of_match = rk3328_clk_ids,.priv_auto_alloc_size = sizeof(struct rk3328_clk_priv),.ofdata_to_platdata = rk3328_clk_ofdata_to_platdata,.ops = &rk3328_clk_ops,.bind = rk3328_clk_bind,.probe = rk3328_clk_probe,+};
1.9.1
Regards, Simon