Re: [U-Boot] [PATCH v4 5/9] arm: dts: imx6ul-isiot: Add FEC node

On 27/01/2017 09:54, Jagan Teki wrote:

From: Jagan Teki jagan@amarulasolutions.com

Add FEC node for Engicam Is.IoT MX6UL module.

Cc: Stefano Babic sbabic@denx.de Cc: Matteo Lisi matteo.lisi@engicam.com Cc: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com

---

arch/arm/dts/imx6ul-isiot.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)

diff --git a/arch/arm/dts/imx6ul-isiot.dtsi b/arch/arm/dts/imx6ul-isiot.dtsi index 1a474ca..346079a 100644 --- a/arch/arm/dts/imx6ul-isiot.dtsi +++ b/arch/arm/dts/imx6ul-isiot.dtsi @@ -56,6 +56,13 @@ }; };

+&fec1 {

• pinctrl-names = "default";
• pinctrl-0 = <&pinctrl_enet1>;
• phy-mode = "rmii";
• status = "okay";

+};

&i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -86,6 +93,21 @@ };

&iomuxc {

• pinctrl_enet1: enet1grp {

• fsl,pins = <
  

• 	MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO    0x1b0b0
  

• 	MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC     0x1b0b0
  

• 	MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
  

• 	MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
  

• 	MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
  

• 	MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
  

• 	MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
  

• 	MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
  

• 	MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b031
  

• 	MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10       0x1b0b0
  

• >;
  

• };
• pinctrl_i2c1: i2c1grp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0

Reviewed-by: Stefano Babic sbabic@denx.de

Best regards, Stefano Babic