Restructures common driver to support LTC3882 voltage regulator chip.
Signed-off-by: Ashish Kumar Ashish.Kumar@nxp.com Signed-off-by: Rajesh Bhagat rajesh.bhagat@nxp.com --- Changes in v3: Restructured LS1088A VID support to use common VID driver Added the coding for voltage in comments i.e. 1/4096V Removed APIs getLSB/MSB and used bit operations.
Changes in v2: Checkpatch errors fixed
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 9 ++- board/freescale/common/vid.c | 75 ++++++++++++++++++++++ include/configs/ls1088aqds.h | 16 +++++ include/configs/ls1088ardb.h | 15 +++++ 4 files changed, 113 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 2706ea8..1394b75 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -184,10 +184,15 @@ struct ccsr_gur { u32 gpporcr3; u32 gpporcr4; u8 res_030[0x60-0x30]; -#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT 2 #define FSL_CHASSIS3_DCFG_FUSESR_VID_MASK 0x1F -#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT 7 #define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK 0x1F +#if defined(CONFIG_ARCH_LS1088A) +#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT 25 +#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT 20 +#else +#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT 2 +#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT 7 +#endif u32 dcfg_fusesr; /* Fuse status register */ u8 res_064[0x70-0x64]; u32 devdisr; /* Device disable control 1 */ diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c index cdf877d..197e08e 100644 --- a/board/freescale/common/vid.c +++ b/board/freescale/common/vid.c @@ -171,6 +171,35 @@ static int read_voltage_from_IR(int i2caddress) } #endif
+#ifdef CONFIG_VOL_MONITOR_LTC3882_READ +/* read the current value of the LTC Regulator Voltage */ +static int read_voltage_from_LTC(int i2caddress) +{ + int ret, vcode = 0; + + /* select the PAGE 0 using PMBus commands PAGE for VDD*/ + ret = i2c_write(I2C_VOL_MONITOR_ADDR, + PMBUS_CMD_PAGE, 1, PWM_CHANNEL0, 1); + if (ret) { + printf("VID: failed to select VDD Page 0\n"); + return ret; + } + + /*read the output voltage using PMBus command READ_VOUT*/ + ret = i2c_read(I2C_VOL_MONITOR_ADDR, + PMBUS_CMD_READ_VOUT, 1, (void *)&vcode, 2); + if (ret) { + printf("VID: failed to read the volatge\n"); + return ret; + } + + /* Scale down to the real mV as LTC resolution is 1/4096V,rounding up */ + vcode = DIV_ROUND_UP(vcode * 1000, 4096); + + return vcode; +} +#endif + static int read_voltage(int i2caddress) { int voltage_read; @@ -178,6 +207,8 @@ static int read_voltage(int i2caddress) voltage_read = read_voltage_from_INA220(i2caddress); #elif defined CONFIG_VOL_MONITOR_IR36021_READ voltage_read = read_voltage_from_IR(i2caddress); +#elif defined CONFIG_VOL_MONITOR_LTC3882_READ + voltage_read = read_voltage_from_LTC(i2caddress); #else return -1; #endif @@ -278,6 +309,42 @@ static int set_voltage_to_IR(int i2caddress, int vdd) debug("VID: Current voltage is %d mV\n", vdd_last); return vdd_last; } + +#endif + +#ifdef CONFIG_VOL_MONITOR_LTC3882_SET +/* this function sets the VDD and returns the value set */ +static int set_voltage_to_LTC(int i2caddress, int vdd) +{ + int ret, vdd_last, vdd_target = vdd; + + /* Scale up to the LTC resolution is 1/4096V */ + vdd = (vdd * 4096) / 1000; + + /* 5-byte buffer which needs to be sent following the + * PMBus command PAGE_PLUS_WRITE. + */ + u8 buff[5] = {0x04, PWM_CHANNEL0, PMBUS_CMD_VOUT_COMMAND, + vdd & 0xFF, (vdd & 0xFF00) >> 8}; + + /* Write the desired voltage code to the regulator */ + ret = i2c_write(I2C_VOL_MONITOR_ADDR, + PMBUS_CMD_PAGE_PLUS_WRITE, 1, (void *)&buff, 5); + if (ret) { + printf("VID: I2C failed to write to the volatge regulator\n"); + return -1; + } + + /* Wait for the volatge to get to the desired value */ + do { + vdd_last = read_voltage_from_LTC(i2caddress); + if (vdd_last < 0) { + printf("VID: Couldn't read sensor abort VID adjust\n"); + return -1; + } + } while (vdd_last != vdd_target); + return vdd_last; +} #endif
static int set_voltage(int i2caddress, int vdd) @@ -286,6 +353,8 @@ static int set_voltage(int i2caddress, int vdd)
#ifdef CONFIG_VOL_MONITOR_IR36021_SET vdd_last = set_voltage_to_IR(i2caddress, vdd); +#elif defined CONFIG_VOL_MONITOR_LTC3882_SET + vdd_last = set_voltage_to_LTC(i2caddress, vdd); #else #error Specific voltage monitor must be defined #endif @@ -452,6 +521,11 @@ int adjust_vdd(ulong vdd_override) } vdd_current = vdd_last; debug("VID: Core voltage is currently at %d mV\n", vdd_last); + +#ifdef CONFIG_VOL_MONITOR_LTC3882_SET + /* Set the target voltage */ + vdd_last = vdd_current = set_voltage(i2caddress, vdd_target); +#else /* * Adjust voltage to at or one step above target. * As measurements are less precise than setting the values @@ -469,6 +543,7 @@ int adjust_vdd(ulong vdd_override) vdd_last = set_voltage(i2caddress, vdd_current); }
+#endif if (board_adjust_vdd(vdd_target) < 0) { ret = -1; goto exit; diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 3547b0b..8ae98e1 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -277,6 +277,22 @@ unsigned long get_board_ddr_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 #define I2C_MUX_CH5 0xD
+#define I2C_MUX_CH_VOL_MONITOR 0xA + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x63 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* PM Bus commands code for LTC3882*/ +#define PMBUS_CMD_PAGE 0x0 +#define PMBUS_CMD_READ_VOUT 0x8B +#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05 +#define PMBUS_CMD_VOUT_COMMAND 0x21 + +#define PWM_CHANNEL0 0x0 + /* * RTC configuration */ diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index d943fa4..86fa033 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -210,6 +210,21 @@
#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
+#define I2C_MUX_CH_VOL_MONITOR 0xA +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x63 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* PM Bus commands code for LTC3882*/ +#define PMBUS_CMD_PAGE 0x0 +#define PMBUS_CMD_READ_VOUT 0x8B +#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05 +#define PMBUS_CMD_VOUT_COMMAND 0x21 + +#define PWM_CHANNEL0 0x0 + /* * I2C bus multiplexer */