In SD boot, the magic number of u-boot image will be checked. For LS102xA, u-boot.bin doesn't have the magic number. So use u-boot.img which includes the magic number instead of u-boot.bin when producing u-boot-with-spl-pbl.bin.
Signed-off-by: Alison Wang alison.wang@freescale.com --- Change log: v2: No change.
Makefile | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/Makefile b/Makefile index 0ba106c..a3ea143 100644 --- a/Makefile +++ b/Makefile @@ -969,10 +969,16 @@ MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE $(call if_changed,mkimage)
+ifeq ($(ARCH),arm) +UBOOT_BINLOAD := u-boot.img +else +UBOOT_BINLOAD := u-boot.bin +endif + OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ --gap-fill=0xff
-u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE +u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE $(call if_changed,pad_cat)
# PPC4xx needs the SPL at the end of the image, since the reset vector