Re: [PATCH 1/8] arm: kirkwood: Pogoplug-V4 : Add DTS files

On Fri, 17 Dec 2021 20:23:27 -0800 Tony Dinh mibodhi@gmail.com wrote:

Hi,

Add DTS files for Pogoplug V4 board

is there any reason you didn't take the kirkwood-pogoplug-series-4.dts file from the Linux tree? That is the same device, isn't it?

Tom will ask you about the upstream status anyway...

Cheers, Andre

Signed-off-by: Tony Dinh mibodhi@gmail.com

arch/arm/dts/Makefile | 1 + arch/arm/dts/kirkwood-pogoplug_v4.dts | 145 ++++++++++++++++++++++++++ 2 files changed, 146 insertions(+) create mode 100644 arch/arm/dts/kirkwood-pogoplug_v4.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7f622fedbd..716c6c0ed2 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -68,6 +68,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \ kirkwood-openrd-client.dtb \ kirkwood-openrd-ultimate.dtb \ kirkwood-pogo_e02.dtb \

• kirkwood-pogoplug_v4.dtb \ kirkwood-sheevaplug.dtb

dtb-$(CONFIG_MACH_S900) += \ diff --git a/arch/arm/dts/kirkwood-pogoplug_v4.dts b/arch/arm/dts/kirkwood-pogoplug_v4.dts new file mode 100644 index 0000000000..b4754f600e --- /dev/null +++ b/arch/arm/dts/kirkwood-pogoplug_v4.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*

• • Copyright (C) 2014-2021 Tony Dinh mibodhi@gmail.com
• • Device tree file for the Pogoplug V4/Mobile
• */

+/dts-v1/;

+#include "kirkwood.dtsi" +#include "kirkwood-6192.dtsi"

+/ {

• model = "Pogoplug v4";
• compatible = "cloudengines,pogoplug-v4", "cloudengines,pogoplug-mobile",

• "marvell,kirkwood-88f6192", "marvell,kirkwood";
  

• memory {

• device_type = "memory";
  

• reg = <0x00000000 0x8000000>;
  

• };
• chosen {

• bootargs = "console=ttyS0,115200";
  

• stdout-path = &uart0;
  

• };
• ocp@f1000000 {

• pinctrl: pin-controller@10000 {
  

• 	pmx_led_green: pmx-led-green {
  

• 		marvell,pins = "mpp22";
  

• 		marvell,function = "gpio";
  

• 	};
  

• 	pmx_led_red: pmx-led-red {
  

• 		marvell,pins = "mpp24";
  

• 		marvell,function = "gpio";
  

• 	};
  

• 	pmx_button_eject: pmx-button-eject {
  

• 		marvell,pins = "mpp29";
  

• 		marvell,function = "gpio";
  

• 	};
  

• };
  

• serial@12000 {
  

• 	status = "ok";
  

• };
  

• sata@80000 {
  

• 	status = "okay";
  

• 	nr-ports = <2>;
  

• };
  

• mvsdio@90000 {
  

• 	pinctrl-0 = <&pmx_sdio>;
  

• 	pinctrl-names = "default";
  

• 	status = "okay";
  

• 	cd-gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
  

• 	/* No WP GPIO */
  

• };
  

• };
• gpio-leds {

• compatible = "gpio-leds";
  

• pinctrl-0 = <&pmx_led_red &pmx_led_green>;
  

• pinctrl-names = "default";
  

• health {
  

• 	label = "status:green:health";
  

• 	gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
  

• 	default-state = "keep";
  

• };
  

• fault {
  

• 	label = "status:red:fault";
  

• 	gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
  

• };
  

• };
• gpio_keys {

• compatible = "gpio-keys";
  

• #address-cells = <1>;
  

• #size-cells = <0>;
  

• pinctrl-0 = <&pmx_button_eject>;
  

• pinctrl-names = "default";
  

• button@1 {
  

• 	label = "Eject Button";
  

• 	linux,code = <KEY_EJECTCD>;
  

• 	gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
  

• };
  

• };

+};

+&nand {

• status = "okay";
• partition@0 {

• label = "u-boot";
  

• reg = <0x0000000 0x200000>;
  

• };
• partition@200000 {

• label = "uImage";
  

• reg = <0x200000 0x300000>;
  

• };
• partition@500000 {

• label = "uImage2";
  

• reg = <0x500000 0x300000>;
  

• };
• partition@800000 {

• label = "failsafe";
  

• reg = <0x800000 0x800000>;
  

• };
• partition@1000000 {

• label = "root";
  

• reg = <0x1000000 0x7000000>;
  

• };

+};

+&mdio {

• status = "okay";
• ethphy0: ethernet-phy@0 {

• reg = <0>;
  

• };

+};

+&eth0 {

• status = "okay";
• ethernet0-port@0 {

• phy-handle = <&ethphy0>;
  

• };

+};

+&pciec {

• status = "okay";

+};

+&pcie0 {

• status = "okay";

+};