mcf5445x platform uses standard format of Config Address for PCI Configuration Mechanism #1. So use new U-Boot macro PCI_CONF1_ADDRESS().
Signed-off-by: Pali Rohár pali@kernel.org --- arch/m68k/cpu/mcf5445x/pci.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/m68k/cpu/mcf5445x/pci.c b/arch/m68k/cpu/mcf5445x/pci.c index af02c4934c97..d487468d0bfa 100644 --- a/arch/m68k/cpu/mcf5445x/pci.c +++ b/arch/m68k/cpu/mcf5445x/pci.c @@ -26,12 +26,11 @@ int pci_##rw##_cfg_##size(struct pci_controller *hose, \ pci_dev_t dev, int offset, type val) \ { \ - u32 addr = 0; \ - u16 cfg_type = 0; \ - addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \ + u32 addr = PCI_CONF1_ADDRESS(PCI_BUS(dev), PCI_DEV(dev), \ + PCI_FUNC(dev), offset); \ out_be32(hose->cfg_addr, addr); \ cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ - out_be32(hose->cfg_addr, addr & 0x7fffffff); \ + out_be32(hose->cfg_addr, addr & ~PCI_CONF1_ENABLE); \ return 0; \ }