Hi Stefan,
I've changed malloc pool size to 2MiB and nothing changed. I've also disabled UBIFS support and that does not make any changes. Still after qemu restart u-boot can not attach to ubi device.
Regards, Marcin
W dniu 27.03.2015 o 16:01, Stefan Roese pisze:
Hi Marcin,
On 27.03.2015 13:59, Marcin Krzemiński wrote:
I want to test some UBI fs behavior in U-Boot using qemu and vexpress_ca9x4 board ( U-Boot 2015.1) To tst UBI I added lines to vexpress_ca9x4.h:
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS /* needed for UBI */ #define CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT "nor0=flash0-0" #define MTDPARTS_DEFAULT "mtdparts=flash0-0:1m(empty),10m(ubi),-(rest)" #define CONFIG_LZO /* needed for UBI */ #define CONFIG_RBTREE /* needed for UBI */ #define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_FIT
also I've changed malloc pool size to 512kB in vexpress_common.h: #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 512 * 1024)
Without looking deeper into your mail, I would recommend to increase the malloc size to at least 2MiB and test again.
Thanks, Stefan