27 Apr
2023
27 Apr
'23
11:38 a.m.
On Wed, Apr 26, 2023 at 11:35:19AM +0200, Belisko Marek wrote:
I'm using 2022.01 u-boot. Booting from SDcard sometimes shows up this log: U-Boot SPL 2022.01 (Jan 10 2022 - 18:46:34 +0000) Trying to boot from MMC2 Card did not respond to voltage select! : -110 spl: mmc init failed with error: -95 Trying to boot from MMC1 mmc_load_image_raw_sector: mmc block read error SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ###
and after reboot board boots fine. Is there any explanation why this is happening pls?
I expect you're hitting the issue that was fixed in v2023.01 by commit 7ff2f30b63 ("mmc: dwmmc: only clear handled interrupts").
Have you tried using a more recent version of U-Boot?