From: Peng Fan peng.fan@nxp.com
OPTEE memory region is set secure access only in ATF with configuration to TRDC, and need to remove it from U-Boot, otherwise U-Boot and Kernel may crash when accessing the memory
Signed-off-by: Peng Fan peng.fan@nxp.com --- arch/arm/mach-imx/imx9/soc.c | 150 ++++++++++++++++++++++++++++++++++- 1 file changed, 149 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c index 797d7a802ba..fd9280a3b1d 100644 --- a/arch/arm/mach-imx/imx9/soc.c +++ b/arch/arm/mach-imx/imx9/soc.c @@ -180,13 +180,161 @@ static struct mm_region imx93_mem_map[] = {
struct mm_region *mem_map = imx93_mem_map;
+static unsigned int imx9_find_dram_entry_in_mem_map(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(imx93_mem_map); i++) + if (imx93_mem_map[i].phys == CFG_SYS_SDRAM_BASE) + return i; + + hang(); /* Entry not found, this must never happen. */ +} + +void enable_caches(void) +{ + /* If OPTEE runs, remove OPTEE memory from MMU table to avoid speculative prefetch + * If OPTEE does not run, still update the MMU table according to dram banks structure + * to set correct dram size from board_phys_sdram_size + */ + int i = 0; + /* + * please make sure that entry initial value matches + * imx93_mem_map for DRAM1 + */ + int entry = imx9_find_dram_entry_in_mem_map(); + u64 attrs = imx93_mem_map[entry].attrs; + + while (i < CONFIG_NR_DRAM_BANKS && + entry < ARRAY_SIZE(imx93_mem_map)) { + if (gd->bd->bi_dram[i].start == 0) + break; + imx93_mem_map[entry].phys = gd->bd->bi_dram[i].start; + imx93_mem_map[entry].virt = gd->bd->bi_dram[i].start; + imx93_mem_map[entry].size = gd->bd->bi_dram[i].size; + imx93_mem_map[entry].attrs = attrs; + debug("Added memory mapping (%d): %llx %llx\n", entry, + imx93_mem_map[entry].phys, imx93_mem_map[entry].size); + i++; entry++; + } + + icache_enable(); + dcache_enable(); +} + +__weak int board_phys_sdram_size(phys_size_t *size) +{ + if (!size) + return -EINVAL; + + *size = PHYS_SDRAM_SIZE; + +#ifdef PHYS_SDRAM_2_SIZE + *size += PHYS_SDRAM_2_SIZE; +#endif + return 0; +} + int dram_init(void) { - gd->ram_size = PHYS_SDRAM_SIZE; + phys_size_t sdram_size; + int ret; + + ret = board_phys_sdram_size(&sdram_size); + if (ret) + return ret; + + /* rom_pointer[1] contains the size of TEE occupies */ + if (rom_pointer[1]) + gd->ram_size = sdram_size - rom_pointer[1]; + else + gd->ram_size = sdram_size; + + return 0; +} + +int dram_init_banksize(void) +{ + int bank = 0; + int ret; + phys_size_t sdram_size; + phys_size_t sdram_b1_size, sdram_b2_size; + + ret = board_phys_sdram_size(&sdram_size); + if (ret) + return ret; + + /* Bank 1 can't cross over 4GB space */ + if (sdram_size > 0x80000000) { + sdram_b1_size = 0x80000000; + sdram_b2_size = sdram_size - 0x80000000; + } else { + sdram_b1_size = sdram_size; + sdram_b2_size = 0; + } + + gd->bd->bi_dram[bank].start = PHYS_SDRAM; + if (rom_pointer[1]) { + phys_addr_t optee_start = (phys_addr_t)rom_pointer[0]; + phys_size_t optee_size = (size_t)rom_pointer[1]; + + gd->bd->bi_dram[bank].size = optee_start - gd->bd->bi_dram[bank].start; + if ((optee_start + optee_size) < (PHYS_SDRAM + sdram_b1_size)) { + if (++bank >= CONFIG_NR_DRAM_BANKS) { + puts("CONFIG_NR_DRAM_BANKS is not enough\n"); + return -1; + } + + gd->bd->bi_dram[bank].start = optee_start + optee_size; + gd->bd->bi_dram[bank].size = PHYS_SDRAM + + sdram_b1_size - gd->bd->bi_dram[bank].start; + } + } else { + gd->bd->bi_dram[bank].size = sdram_b1_size; + } + + if (sdram_b2_size) { + if (++bank >= CONFIG_NR_DRAM_BANKS) { + puts("CONFIG_NR_DRAM_BANKS is not enough for SDRAM_2\n"); + return -1; + } + gd->bd->bi_dram[bank].start = 0x100000000UL; + gd->bd->bi_dram[bank].size = sdram_b2_size; + }
return 0; }
+phys_size_t get_effective_memsize(void) +{ + int ret; + phys_size_t sdram_size; + phys_size_t sdram_b1_size; + + ret = board_phys_sdram_size(&sdram_size); + if (!ret) { + /* Bank 1 can't cross over 4GB space */ + if (sdram_size > 0x80000000) { + sdram_b1_size = 0x80000000; + } else { + sdram_b1_size = sdram_size; + } + + if (rom_pointer[1]) { + /* We will relocate u-boot to top of dram1. TEE position has two cases: + * 1. At the top of dram1, Then return the size removed optee size. + * 2. In the middle of dram1, return the size of dram1. + */ + if ((rom_pointer[0] + rom_pointer[1]) == (PHYS_SDRAM + sdram_b1_size)) + return ((phys_addr_t)rom_pointer[0] - PHYS_SDRAM); + } + + return sdram_b1_size; + } else { + return PHYS_SDRAM_SIZE; + } +} + void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) { mac[0] = 0x1;