On Fri, 25 Jun 2021 15:05:41 +0200 Maxime Ripard maxime@cerno.tech wrote:
Most of the error messages in the NAND fastboot support are missing a \n at the end, add it where relevant.
Signed-off-by: Maxime Ripard maxime@cerno.tech
Reviewed-by: Andre Przywara andre.przywara@arm.com
Thanks! Andre
drivers/fastboot/fb_nand.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/fastboot/fb_nand.c b/drivers/fastboot/fb_nand.c index eb8a36f29222..e07df33d3665 100644 --- a/drivers/fastboot/fb_nand.c +++ b/drivers/fastboot/fb_nand.c @@ -49,13 +49,13 @@ static int fb_nand_lookup(const char *partname,
ret = find_dev_and_part(partname, &dev, &pnum, part); if (ret) {
pr_err("cannot find partition: '%s'", partname);
pr_err("cannot find partition: '%s'\n", partname);fastboot_fail("cannot find partition", response); return ret; }
if (dev->id->type != MTD_DEV_TYPE_NAND) {
pr_err("partition '%s' is not stored on a NAND device",
pr_err("partition '%s' is not stored on a NAND device\n", partname);@@ -179,7 +179,7 @@ void fastboot_nand_flash_write(const char *cmd, void *download_buffer,
ret = fb_nand_lookup(cmd, &mtd, &part, response); if (ret) {
pr_err("invalid NAND device");
pr_err("invalid NAND device\n");@@ -243,7 +243,7 @@ void fastboot_nand_erase(const char *cmd, char *response)
ret = fb_nand_lookup(cmd, &mtd, &part, response); if (ret) {
pr_err("invalid NAND device");
pr_err("invalid NAND device\n");@@ -254,7 +254,7 @@ void fastboot_nand_erase(const char *cmd, char *response)
ret = _fb_nand_erase(mtd, part); if (ret) {
pr_err("failed erasing from device %s", mtd->name);
pr_err("failed erasing from device %s\n", mtd->name);