Re: [U-Boot] UBI on NAND flash again

Dear Stefan Roese,

In message 200906040856.51774.sr@denx.de you wrote:

...

I used ubiformat from Linux using /dev/ubi0 which is attached to /dev/mtd4 which again points to the same area in the flash than 'ubilayer' does in U-Boot. So I should be able to access that same volume from the bootloader, right? Or do I miss some important point?

I have to admit that I never used it this way. Using "ubi part" on an erased partition works fine. I suggest you give it a try.

But that seems a perfectly valid, and actually pretty resonable test szenario. I think you should include this in your tests.

Best regards,

Wolfgang Denk