From: Alexandru Gagniuc mr.nuke.me@gmail.com
This reverts commit 38d6b7ebdaee3e0e8426ef1b9df88bdce8ae2e75.
struct global_data contains a pointer to the bd_info structure. This pointer was populated spl_set_bd() to a pre-allocated bd_info in the ".data" section. The referenced commit replaced this mechanism to one that uses malloc(). That new mechanism is only used if SPL_ALLOC_BD=y. which very few boards do.
The result is that (struct global_data)->bd is NULL in SPL on most platforms. This breaks falcon mode, since arch_fixup_fdt() tries to access (struct global_data)->bd and set the "/memory" node in the devicetree. The result is that the "/memory" node contains garbage values, causing linux to panic() as it sets up the page table.
Instead of trying to fix the mess, potentially causing other issues, revert to the code that worked, while this change is reworked.
Signed-off-by: Alexandru Gagniuc mr.nuke.me@gmail.com --- arch/arm/cpu/armv8/fsl-layerscape/spl.c | 5 +---- common/spl/Kconfig | 9 --------- common/spl/spl.c | 20 ++++++++------------ include/spl.h | 10 +--------- 4 files changed, 10 insertions(+), 34 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c index 5b43a2a231..b3f1148f9d 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c @@ -41,9 +41,6 @@ u32 spl_boot_device(void)
#ifdef CONFIG_SPL_BUILD
-/* Define board data structure */ -static struct bd_info bdata __attribute__ ((section(".data"))); - void spl_board_init(void) { #if defined(CONFIG_NXP_ESBC) && defined(CONFIG_FSL_LSCH2) @@ -89,7 +86,7 @@ void board_init_f(ulong dummy) get_clocks();
preloader_console_init(); - gd->bd = &bdata; + spl_set_bd();
#ifdef CONFIG_SYS_I2C #ifdef CONFIG_SPL_I2C_SUPPORT diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 0f528f346f..df5468f1ac 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -113,15 +113,6 @@ config SPL_FSL_PBL Create boot binary having SPL binary in PBI format concatenated with u-boot binary.
-config SPL_ALLOC_BD - bool "Allocate memory for bd_info" - default y if X86 || SANDBOX - help - Some boards don't allocate space for this in their board_init_f() - code. In this case U-Boot can allocate space for gd->bd in the - standard SPL flow (board_init_r()). Enable this option to support - this feature. - endmenu
config HANDOFF diff --git a/common/spl/spl.c b/common/spl/spl.c index 8c4cd933cf..a0a608fd77 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -55,6 +55,9 @@ binman_sym_declare(ulong, spl, image_pos); binman_sym_declare(ulong, spl, size); #endif
+/* Define board data structure */ +static struct bd_info bdata __attribute__ ((section(".data"))); + /* * Board-specific Platform code can reimplement show_boot_progress () if needed */ @@ -490,19 +493,14 @@ static int spl_common_init(bool setup_malloc) return 0; }
-int spl_alloc_bd(void) +void spl_set_bd(void) { /* * NOTE: On some platforms (e.g. x86) bdata may be in flash and not * writeable. */ - if (!gd->bd) { - gd->bd = malloc(sizeof(*gd->bd)); - if (!gd->bd) - return -ENOMEM; - } - - return 0; + if (!gd->bd) + gd->bd = &bdata; }
int spl_early_init(void) @@ -652,6 +650,8 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
debug(">>" SPL_TPL_PROMPT "board_init_r()\n");
+ spl_set_bd(); + #if defined(CONFIG_SYS_SPL_MALLOC_START) mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START, CONFIG_SYS_SPL_MALLOC_SIZE); @@ -661,10 +661,6 @@ void board_init_r(gd_t *dummy1, ulong dummy2) if (spl_init()) hang(); } - if (IS_ENABLED(CONFIG_SPL_ALLOC_BD) && spl_alloc_bd()) { - puts("Cannot alloc bd\n"); - hang(); - } #if !defined(CONFIG_PPC) && !defined(CONFIG_ARCH_MX6) /* * timer_init() does not exist on PPC systems. The timer is initialized diff --git a/include/spl.h b/include/spl.h index 4f6e0e53f5..cee9a42ddb 100644 --- a/include/spl.h +++ b/include/spl.h @@ -357,15 +357,7 @@ u32 spl_mmc_boot_mode(const u32 boot_device); * If not overridden, it is weakly defined in common/spl/spl_mmc.c. */ int spl_mmc_boot_partition(const u32 boot_device); - -/** - * spl_alloc_bd() - Allocate space for bd_info - * - * This sets up the gd->bd pointer by allocating memory for it - * - * @return 0 if OK, -ENOMEM if out of memory - */ -int spl_alloc_bd(void); +void spl_set_bd(void);
/** * spl_set_header_raw_uboot() - Set up a standard SPL image structure