Hi Felix,
On 31 October 2016 at 08:54, Felix Brack fb@ltec.ch wrote:
Hello Simon,
On 26.10.2016 18:30, Simon Glass wrote:
Hi Felix,
On 19 October 2016 at 04:12, Felix Brack fb@ltec.ch wrote:
This patch adds support for the PDU001 board.
Signed-off-by: Felix Brack fb@ltec.ch
arch/arm/Kconfig | 1 + arch/arm/cpu/armv7/am33xx/Kconfig | 9 ++ board/eets/pdu001/Kconfig | 66 ++++++++++ board/eets/pdu001/MAINTAINERS | 6 + board/eets/pdu001/Makefile | 13 ++ board/eets/pdu001/README | 35 +++++ board/eets/pdu001/board.c | 263 ++++++++++++++++++++++++++++++++++++++ board/eets/pdu001/board.h | 30 +++++ board/eets/pdu001/mux.c | 146 +++++++++++++++++++++ configs/pdu001_defconfig | 33 +++++ include/configs/pdu001.h | 117 +++++++++++++++++ 11 files changed, 719 insertions(+) create mode 100644 board/eets/pdu001/Kconfig create mode 100644 board/eets/pdu001/MAINTAINERS create mode 100644 board/eets/pdu001/Makefile create mode 100644 board/eets/pdu001/README create mode 100644 board/eets/pdu001/board.c create mode 100644 board/eets/pdu001/board.h create mode 100644 board/eets/pdu001/mux.c create mode 100644 configs/pdu001_defconfig create mode 100644 include/configs/pdu001.h
[...]
+static struct module_pin_mux uart0_pin_mux[] = {
{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */{-1},Really this should go in a pinctrl driver.
Agreed. A pinctrl driver for the TI AM335X SOC doesn't exist yet, correct?
I'm not sure, but it seems like we should get one sometime!
Regards, Simon