On Tue, Jan 27, 2015 at 02:43:57PM +0100, Michal Simek wrote:
Hi guys,
2014-11-24 23:10 GMT+01:00 Tom Rini trini@ti.com:
On Tue, Nov 11, 2014 at 07:03:55PM +0100, Stefan Roese wrote:
We had the problem on an AM33xx platform, that SPL detected an unsupported boot-device. But since this message is a debug message it took a bit of time to really know, where the hangup in SPL resulted from. So let's change this debug message to a printf and also print the detected boot-device that is not supported. This makes debugging of such cases much easier.
Signed-off-by: Stefan Roese sr@denx.de Cc: Wolfgang Denk wd@denx.de Cc: Tom Rini trini@ti.com Acked-by: Heiko Schocher hs@denx.de
Applied to u-boot/master, thanks!
This patch is causing problem on Microblaze because SPL exceed 4k limit. It is only one printf which is called in entire SPL that's why this should be solved a little bit differently.
OK, but for clarity you need and are using both CONFIG_SPL_SERIAL_SUPPORT and CONFIG_SPL_LIBCOMMON_SUPPORT because you're using puts but not printf, yes?