The interrupt controller property is removed from the clint binding because the clint is not an interrupt-controller. That is, no other devices have an interrupt which is controlled by the clint.
Signed-off-by: Sean Anderson seanga2@gmail.com ---
Changes in v4: - Remove clock-frequency property from k210 clint binding because we fall back on timebase-frequency
Changes in v2: - New
arch/riscv/dts/k210.dtsi | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/riscv/dts/k210.dtsi b/arch/riscv/dts/k210.dtsi index 2546c7d4e0..84cff51c36 100644 --- a/arch/riscv/dts/k210.dtsi +++ b/arch/riscv/dts/k210.dtsi @@ -17,6 +17,8 @@ compatible = "kendryte,k210";
aliases { + cpu0 = &cpu0; + cpu1 = &cpu1; dma0 = &dmac0; gpio0 = &gpio0; gpio1 = &gpio1_0; @@ -126,14 +128,13 @@ read-only; };
- clint0: interrupt-controller@2000000 { + clint0: clint@2000000 { #interrupt-cells = <1>; compatible = "kendryte,k210-clint", "riscv,clint0"; reg = <0x2000000 0xC000>; - interrupt-controller; interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, <&cpu1_intc 3>, <&cpu1_intc 7>; - clocks = <&sysclk K210_CLK_CPU>; + clocks = <&sysclk K210_CLK_CLINT>; };
plic0: interrupt-controller@C000000 {