Hi Simon,
noticed just after sending the patch an issue with my tests, please freeze the patch, there are possible issues in it.
Will confirm this v3 in case after re-testing or will issue a v4.
thanks,
regards, Angelo Dureghello
On 25/04/2016 00:20, Angelo Dureghello wrote:
To use serial uclass and DM, CONFIG_SYS_MALLOC_F must be used. So CONFIG_SYS_GENERIC_GLOBAL_DATA has been undefined and call to board_init_f_mem() is added for all cpu's.
Signed-off-by: Angelo Dureghello angelo@sysam.it
Changes for v2: - none Changes for v3: - fix start.S using new board_init_f_alloc_reserve
arch/m68k/cpu/mcf5227x/start.S | 16 ++++++++++++++++ arch/m68k/cpu/mcf523x/start.S | 16 ++++++++++++++++ arch/m68k/cpu/mcf52x2/start.S | 16 ++++++++++++++++ arch/m68k/cpu/mcf530x/cpu_init.c | 2 +- arch/m68k/cpu/mcf530x/start.S | 16 ++++++++++++++++ arch/m68k/cpu/mcf532x/start.S | 16 ++++++++++++++++ arch/m68k/cpu/mcf5445x/start.S | 16 ++++++++++++++++ arch/m68k/cpu/mcf547x_8x/start.S | 16 ++++++++++++++++ 8 files changed, 113 insertions(+), 1 deletion(-)
diff --git a/arch/m68k/cpu/mcf5227x/start.S b/arch/m68k/cpu/mcf5227x/start.S index 23024f9..ea36020 100644 --- a/arch/m68k/cpu/mcf5227x/start.S +++ b/arch/m68k/cpu/mcf5227x/start.S @@ -379,6 +379,22 @@ _start:
move.l #__got_start, %a5 /* put relocation table address to a5 */
+#if defined(CONFIG_SYS_MALLOC_F)
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
- /* allocate reserved area from current top of stack */
- move.l %sp, -(%sp)
- bsr board_init_f_alloc_reserve
- /* update stack and frame-pointers */
- move.l %d0, %sp
- move.l %sp, %fp
- /* initialize reserved area */
- move.l %d0, -(%sp)
- bsr board_init_f_init_reserve
+#endif
- bsr cpu_init_f /* run low-level CPU init code (from flash) */ bsr board_init_f /* run low-level board init code (from flash) */
diff --git a/arch/m68k/cpu/mcf523x/start.S b/arch/m68k/cpu/mcf523x/start.S index 1702f98..db1cb11 100644 --- a/arch/m68k/cpu/mcf523x/start.S +++ b/arch/m68k/cpu/mcf523x/start.S @@ -141,6 +141,22 @@ _start:
move.l #__got_start, %a5 /* put relocation table address to a5 */
+#if defined(CONFIG_SYS_MALLOC_F)
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
- /* allocate reserved area from current top of stack */
- move.l %sp, -(%sp)
- bsr board_init_f_alloc_reserve
- /* update stack and frame-pointers */
- move.l %d0, %sp
- move.l %sp, %fp
- /* initialize reserved area */
- move.l %d0, -(%sp)
- bsr board_init_f_init_reserve
+#endif
- /* run low-level CPU init code (from flash) */ move.l #cpu_init_f, %a1 jsr (%a1)
diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S index 4af691f..e60d51e 100644 --- a/arch/m68k/cpu/mcf52x2/start.S +++ b/arch/m68k/cpu/mcf52x2/start.S @@ -198,6 +198,22 @@ _after_flashbar_copy:
move.l #__got_start, %a5 /* put relocation table address to a5 */
+#if defined(CONFIG_SYS_MALLOC_F)
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
- /* allocate reserved area from current top of stack */
- move.l %sp, -(%sp)
- bsr board_init_f_alloc_reserve
- /* update stack and frame-pointers */
- move.l %d0, %sp
- move.l %sp, %fp
- /* initialize reserved area */
- move.l %d0, -(%sp)
- bsr board_init_f_init_reserve
+#endif
- /* run low-level CPU init code (from flash) */ move.l #cpu_init_f, %a1 jsr (%a1)
diff --git a/arch/m68k/cpu/mcf530x/cpu_init.c b/arch/m68k/cpu/mcf530x/cpu_init.c index 80dc239..b09eed8 100644 --- a/arch/m68k/cpu/mcf530x/cpu_init.c +++ b/arch/m68k/cpu/mcf530x/cpu_init.c @@ -142,7 +142,7 @@ int cpu_init_r(void) return 0; }
-void uart_port_conf(void) +void uart_port_conf(int port) { }
diff --git a/arch/m68k/cpu/mcf530x/start.S b/arch/m68k/cpu/mcf530x/start.S index 097958a..9740b59 100644 --- a/arch/m68k/cpu/mcf530x/start.S +++ b/arch/m68k/cpu/mcf530x/start.S @@ -137,6 +137,22 @@ _start: /* put relocation table address to a5 */ move.l #__got_start, %a5
+#if defined(CONFIG_SYS_MALLOC_F)
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
- /* allocate reserved area from current top of stack */
- move.l %sp, -(%sp)
- bsr board_init_f_alloc_reserve
- /* update stack and frame-pointers */
- move.l %d0, %sp
- move.l %sp, %fp
- /* initialize reserved area */
- move.l %d0, -(%sp)
- bsr board_init_f_init_reserve
+#endif
- /* run low-level CPU init code (from flash) */ bsr cpu_init_f
diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S index 131ad6e..558c8d5 100644 --- a/arch/m68k/cpu/mcf532x/start.S +++ b/arch/m68k/cpu/mcf532x/start.S @@ -155,6 +155,22 @@ _start:
move.l #__got_start, %a5 /* put relocation table address to a5 */
+#if defined(CONFIG_SYS_MALLOC_F)
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
- /* allocate reserved area from current top of stack */
- move.l %sp, -(%sp)
- bsr board_init_f_alloc_reserve
- /* update stack and frame-pointers */
- move.l %d0, %sp
- move.l %sp, %fp
- /* initialize reserved area */
- move.l %d0, -(%sp)
- bsr board_init_f_init_reserve
+#endif
- /* run low-level CPU init code (from flash) */ move.l #cpu_init_f, %a1 jsr (%a1)
diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S index f50f147..49c8d30 100644 --- a/arch/m68k/cpu/mcf5445x/start.S +++ b/arch/m68k/cpu/mcf5445x/start.S @@ -664,6 +664,22 @@ _start:
move.l #__got_start, %a5 /* put relocation table address to a5 */
+#if defined(CONFIG_SYS_MALLOC_F)
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
- /* allocate reserved area from current top of stack */
- move.l %sp, -(%sp)
- bsr board_init_f_alloc_reserve
- /* update stack and frame-pointers */
- move.l %d0, %sp
- move.l %sp, %fp
- /* initialize reserved area */
- move.l %d0, -(%sp)
- bsr board_init_f_init_reserve
+#endif
- /* run low-level CPU init code (from flash) */ move.l #cpu_init_f, %a1 jsr (%a1)
diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S index 75de22d..34cfbf0 100644 --- a/arch/m68k/cpu/mcf547x_8x/start.S +++ b/arch/m68k/cpu/mcf547x_8x/start.S @@ -148,6 +148,22 @@ _start:
move.l #__got_start, %a5 /* put relocation table address to a5 */
+#if defined(CONFIG_SYS_MALLOC_F)
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
- /* allocate reserved area from current top of stack */
- move.l %sp, -(%sp)
- bsr board_init_f_alloc_reserve
- /* update stack and frame-pointers */
- move.l %d0, %sp
- move.l %sp, %fp
- /* initialize reserved area */
- move.l %d0, -(%sp)
- bsr board_init_f_init_reserve
+#endif
- jbsr cpu_init_f /* run low-level CPU init code (from flash) */ jbsr board_init_f /* run low-level board init code (from flash) */