Hi All,
This is (hopefully) last version of Dragonboard410c series.
As always - for "simplicity" this series is available on my github: https://github.com/hallor/u-boot/tree/dragonboard-for-mainline-v3
There are almost no changes (none that should break anything): - Updated dragonboard readme.txt with info on how to stop @ fastboot - Added SPMI entries into test.dts (so automatic DM tests would not fail) - Added Tested-by and Reviewed-by Simon (from v2 comments) - Rebased to recent master
@Simon: Thanks for the tests!
Regards, Mateusz
V2 cover contents:
This is updated series. 99% of review changes are applied, specific changes are (as always) include in each patch.
You can find this series on my github (if anyone just want to try it - that branch has also wait_for_bit applied): https://github.com/hallor/u-boot/tree/dragonboard-for-mainline-v2
I did target tests on Dragonboard410c, and build tested platforms that may be affected by ULPI changes.
@Simon: I decided not to rewrite pm8916_gpio for now, but for sake of "cleannes" moved offending bindings to separate file (and they are now properly childs of pm8916_gpio). I will update it during rework of SoC gpio driver (I will have to create proper pinmux/pinctrl drivers to get rid of Little Kernel eventually).
This series still needs wait_for_bit series that is not included (yet).
V1 cover contents:
I finally managed to cleanup RFC for submission. I've included changes in each patch, there is a bit of them, but all are needed :)
This series requires wait_for_bit patch that I send few days ago: https://patchwork.ozlabs.org/patch/561185/
RFC cover contents: http://lists.denx.de/pipermail/u-boot/2015-December/237365.html
Changes in v3: - Updated test.dts to include SPMI like sandbox.dts does - readme: Added info on how to enter fastboot mode and that dtbTool is also part of skales
Changes in v2: - Added newline before return... (globally) - Renamed p to priv (priv data) - it required some rewrapping - Added Reviewed-by - Reordered includes (again) - Added newlines between returns - Fixed error handling in msm_gpio_probe - Added reviewed-by - Add reviewed-by - Add Reviewed-by (sjg) - Add better (any) descriptions for Kconfig items. - New patch, independent of the rest - Should compile cleanly on all affected platforms - Is orthogonal to series (i.e. if get's NAK will not break rest of series) - Add acked-by - Add reviewed-by - Add Acked-by - Use PORT_... macro to write to portsc - Remove extra whitespace in probe() - Add acked-by - Use proper entry order in Kconfig - Rename CONFIG_DM_SPMI -> CONFIG_SPMI - Fix header ordering - Add reviewed-by - Rename CONFIG_DM_SPMI -> CONFIG_SPMI - Rename r -> regs, p -> priv - Add reviewed-by - Update binding doc (drop unused bindig) - Rename DM_SPMI -> SPMI - Rename p -> priv (in write/read) - Fix header ordering (again) - Add reviewed-by - Add reviewed-by - Reordered Kconfig & Makefile (to keep alphabetical ordering) - Added link to dt binding @ help - Add Reviewed-by - Rename DM_SPMI -> SPMI - Make MND divider comments more compact :) - p -> priv - Add reviewed-by - Reordered Kconfig to keep alphabetical order - Renamed reset_sandbox -> msm_reset (typo in reset.c) - Renamed CONFIG_DM_SPMI -> CONFIG_SPMI - Removed extra enter in dragonboard file - Added ULPI* to defconfig - Added MAINTAINERS to board - Cleaned up config file - use distro defaults/environment: - Dropped multiple CONFIG_CMD* and other CONFIG_* - Added distro env/config - Dropped old boot commands - Split dts - pm8916_gpio entries are taken directly from Linux Dragonboard dts; Add handles for u-boot in -uboot.dtsi; They will be removed once gpio drivers are converted to pinctrl. - Renamed some pmic nodes, fixed dragonboard.c to find them properly. - Added header and converted comments to c98-style in head.S - Print error if pmic gpio node is not found. - New patch
Changes in v1: - Added (better) help to KConfig - Added dt binding documentation - Fixed include ordering - Reworked msm_serial_getc - Added error handling to msm_uart_clk_init (that is ignored later for now) - Dropped unneeded DM_FLAG_PRE_RELOC - Added dt binding documentation - Added help to KConfig - Use clrsetbits() to switch direction - Fixed include order - Added #defines for registers/register fields - Added secondary compatible string - Added commit message - Added DT binding documentation - Added Kconfig help - Reordered includes - Dropped redundant fields from msm_sdhc - Cleaned up clock init code (+ added error handling) - Dropped mdelay - use wait_for_bit instead in reset code - Added missing newline after declarations - Added error handling if "reg" is missing - Converted base address to pointer - No changes, just added Acked-by, Reviewed-by - Reordered header files - Removed braces around constant - Added more verbose help to KConfig - Added ULPI dependency to Kconfig - Drop register #defines - use ehci-ci.h instead - Create fixed ulpi viewport for device - Use setbits/clearbits where possible - Use wait_for_bit to reset controller - Add dt binding documents - Reorder includes - Add read/write arguments documentation - add binding documentation and better Kconfig help - Changed a bit mapping - Change include order - Use clrsetbits* where possible - Add one more supported dts id - Handle missing fields in dt properly - Added dt bindings - Reoder includes - Replaced extract_* macros with ordinary shift/mask - Added error checking and whitespaces in probe - Add binding doc - Fixed inlcude ordering - Merged direction_input and direction_output functions - gpio_get: use switch instead of stacked if - use pmic_clrsetbits - add possibility to change prwkey bank name - Handle invalid bindings - Sanity HW check (i.e. check type/subtype registers) - Fix include order - Cleanup defines (added spaces for readibility) - Base address is integer to avoid casting - Use setbits_* family where possible - Drop unneded comments, added newlines where needed - Check return value of dev_get_addr - Add binding for apq8016 - Cleaned up divider calculation - Drop most of gpio.h (only empty file is needed) - Add better help for dragonboard - Move static structures to board_prepare_usb - Add DM_SPMI to defconfig
Mateusz Kulikowski (18): serial: Add support for Qualcomm serial port gpio: Add support for Qualcomm gpio controller mmc: Add support for Qualcomm SDHCI controller ehci-hcd: Add init_after_reset usb: ulpi: Add Kconfig options for ULPI Migrate CONFIG_ULPI* to Kconfig usb: Rename ehci-fsl.h to ehci-ci.h usb: ehci-ci: Add missing registers. ehci-ci.h: drop generic USBCMD fields ehci: Add support for Qualcomm EHCI drivers: Add SPMI bus uclass spmi: Add sandbox test driver drivers: spmi: Add support for Qualcomm SPMI bus driver pmic: Add support for Qualcomm PM8916 PMIC gpio: Add support for Qualcomm PM8916 gpios arm: Add support for Qualcomm Snapdragon family board: Add Qualcomm Dragonboard 410C support Add myself as Snapdragon and SPMI maintainer
MAINTAINERS | 11 + arch/arm/Kconfig | 12 + arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 2 + arch/arm/dts/dragonboard410c-uboot.dtsi | 28 ++ arch/arm/dts/dragonboard410c.dts | 148 ++++++++++ arch/arm/mach-snapdragon/Kconfig | 26 ++ arch/arm/mach-snapdragon/Makefile | 8 + arch/arm/mach-snapdragon/clock-apq8016.c | 262 ++++++++++++++++++ arch/arm/mach-snapdragon/include/mach/gpio.h | 9 + .../mach-snapdragon/include/mach/sysmap-apq8016.h | 14 + arch/arm/mach-snapdragon/reset.c | 40 +++ arch/sandbox/dts/sandbox.dts | 20 ++ arch/sandbox/dts/test.dts | 20 ++ board/qualcomm/dragonboard410c/Kconfig | 15 + board/qualcomm/dragonboard410c/MAINTAINERS | 6 + board/qualcomm/dragonboard410c/Makefile | 8 + board/qualcomm/dragonboard410c/dragonboard410c.c | 131 +++++++++ board/qualcomm/dragonboard410c/head.S | 28 ++ board/qualcomm/dragonboard410c/readme.txt | 43 +++ board/qualcomm/dragonboard410c/u-boot.lds | 90 ++++++ configs/colibri_t20_defconfig | 2 + configs/dragonboard410c_defconfig | 31 +++ configs/harmony_defconfig | 2 + configs/mcx_defconfig | 3 + configs/mt_ventoux_defconfig | 3 + configs/sandbox_defconfig | 4 + configs/twister_defconfig | 3 + configs/zynq_picozed_defconfig | 3 + configs/zynq_zc702_defconfig | 3 + configs/zynq_zc706_defconfig | 3 + configs/zynq_zed_defconfig | 3 + configs/zynq_zybo_defconfig | 3 + doc/device-tree-bindings/gpio/gpio-msm.txt | 22 ++ doc/device-tree-bindings/gpio/pm8916_gpio.txt | 48 ++++ doc/device-tree-bindings/mmc/msm_sdhci.txt | 25 ++ doc/device-tree-bindings/pmic/pm8916.txt | 18 ++ doc/device-tree-bindings/serial/msm-serial.txt | 6 + doc/device-tree-bindings/spmi/spmi-msm.txt | 26 ++ doc/device-tree-bindings/spmi/spmi-sandbox.txt | 31 +++ doc/device-tree-bindings/usb/ehci-msm.txt | 10 + doc/git-mailrc | 3 + drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/gpio/Kconfig | 24 ++ drivers/gpio/Makefile | 2 + drivers/gpio/msm_gpio.c | 135 +++++++++ drivers/gpio/pm8916_gpio.c | 302 +++++++++++++++++++++ drivers/mmc/Kconfig | 9 + drivers/mmc/Makefile | 1 + drivers/mmc/msm_sdhci.c | 180 ++++++++++++ drivers/power/pmic/Kconfig | 16 ++ drivers/power/pmic/Makefile | 1 + drivers/power/pmic/pm8916.c | 96 +++++++ drivers/serial/Kconfig | 8 + drivers/serial/Makefile | 1 + drivers/serial/serial_msm.c | 212 +++++++++++++++ drivers/spmi/Kconfig | 23 ++ drivers/spmi/Makefile | 9 + drivers/spmi/spmi-msm.c | 189 +++++++++++++ drivers/spmi/spmi-sandbox.c | 157 +++++++++++ drivers/spmi/spmi-uclass.c | 48 ++++ drivers/usb/Kconfig | 2 + drivers/usb/host/Kconfig | 11 + drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-fsl.c | 2 +- drivers/usb/host/ehci-hcd.c | 6 + drivers/usb/host/ehci-mpc512x.c | 6 +- drivers/usb/host/ehci-msm.c | 178 ++++++++++++ drivers/usb/host/ehci-mx5.c | 2 +- drivers/usb/host/ehci-mx6.c | 2 +- drivers/usb/host/ehci-mxc.c | 2 +- drivers/usb/host/ehci-vf.c | 2 +- drivers/usb/host/ehci-zynq.c | 2 +- drivers/usb/host/ehci.h | 1 + drivers/usb/ulpi/Kconfig | 33 +++ include/configs/colibri_t20.h | 2 - include/configs/dragonboard410c.h | 153 +++++++++++ include/configs/harmony.h | 2 - include/configs/mcx.h | 2 - include/configs/tam3517-common.h | 2 - include/configs/zynq-common.h | 2 - include/dm/uclass-id.h | 1 + include/spmi/spmi.h | 47 ++++ include/usb/{ehci-fsl.h => ehci-ci.h} | 16 +- test/dm/Makefile | 1 + test/dm/spmi.c | 115 ++++++++ 87 files changed, 3156 insertions(+), 27 deletions(-) create mode 100644 arch/arm/dts/dragonboard410c-uboot.dtsi create mode 100644 arch/arm/dts/dragonboard410c.dts create mode 100644 arch/arm/mach-snapdragon/Kconfig create mode 100644 arch/arm/mach-snapdragon/Makefile create mode 100644 arch/arm/mach-snapdragon/clock-apq8016.c create mode 100644 arch/arm/mach-snapdragon/include/mach/gpio.h create mode 100644 arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h create mode 100644 arch/arm/mach-snapdragon/reset.c create mode 100644 board/qualcomm/dragonboard410c/Kconfig create mode 100644 board/qualcomm/dragonboard410c/MAINTAINERS create mode 100644 board/qualcomm/dragonboard410c/Makefile create mode 100644 board/qualcomm/dragonboard410c/dragonboard410c.c create mode 100644 board/qualcomm/dragonboard410c/head.S create mode 100644 board/qualcomm/dragonboard410c/readme.txt create mode 100644 board/qualcomm/dragonboard410c/u-boot.lds create mode 100644 configs/dragonboard410c_defconfig create mode 100644 doc/device-tree-bindings/gpio/gpio-msm.txt create mode 100644 doc/device-tree-bindings/gpio/pm8916_gpio.txt create mode 100644 doc/device-tree-bindings/mmc/msm_sdhci.txt create mode 100644 doc/device-tree-bindings/pmic/pm8916.txt create mode 100644 doc/device-tree-bindings/serial/msm-serial.txt create mode 100644 doc/device-tree-bindings/spmi/spmi-msm.txt create mode 100644 doc/device-tree-bindings/spmi/spmi-sandbox.txt create mode 100644 doc/device-tree-bindings/usb/ehci-msm.txt create mode 100644 drivers/gpio/msm_gpio.c create mode 100644 drivers/gpio/pm8916_gpio.c create mode 100644 drivers/mmc/msm_sdhci.c create mode 100644 drivers/power/pmic/pm8916.c create mode 100644 drivers/serial/serial_msm.c create mode 100644 drivers/spmi/Kconfig create mode 100644 drivers/spmi/Makefile create mode 100644 drivers/spmi/spmi-msm.c create mode 100644 drivers/spmi/spmi-sandbox.c create mode 100644 drivers/spmi/spmi-uclass.c create mode 100644 drivers/usb/host/ehci-msm.c create mode 100644 drivers/usb/ulpi/Kconfig create mode 100644 include/configs/dragonboard410c.h create mode 100644 include/spmi/spmi.h rename include/usb/{ehci-fsl.h => ehci-ci.h} (96%) create mode 100644 test/dm/spmi.c