On 11/02/2020 16.20, Rasmus Villemoes wrote:
This is a combination of a single patch and a 4-part series sent previously [1,2], this time with Jagan on Cc.
Patch 1 is a convenient pseudo-gpio driver for controlling a single output signal on mpc830x. Since it's (usually) used as a chip select, representing it as a gpio (without the gp or i) makes it simple to use in device tree.
The remaining four fix bugs in the mpc8xxx_spi driver, most importantly patch 4. Without it, reads and writes of certain lengths from spi-nor fails, and stuff at physical address 0x0 gets overwritten even if no input buffer is supplied (e.g. when sending a command).
Tested on an mpc8309-derived board. It would be nice if someone with access to the gazerbeam board can test that this doesn't break that - in particular, the "only do transfers that are multiple of 8 bits" part.
[1] https://patchwork.ozlabs.org/patch/1219513/ [2] https://patchwork.ozlabs.org/cover/1218170/
Ping? Anything I can do to get these patches reviewed?
Thanks, Rasmus