From: Stefan Roese sr@denx.de
There have been 3 versions of the sunxi_emac support patch during its development. Somehow version 2 ended up in upstream u-boot where as the u-boot-sunxi git repo got version 3.
This bumps the version in upstream u-boot to version 3 of the patch: - Initialize MII clock earlier so mii access to allow independent use - Name change from WEMAC to EMAC to match mainline kernel & chip manual - Cosmetic code cleanup
Signed-off-by: Stefan Roese sr@denx.de Signed-off-by: Henrik Nordstrom henrik@henriknordstrom.net Signed-off-by: Oliver Schinagl oliver@schinagl.nl Signed-off-by: Hans de Goede hdegoede@redhat.com --- drivers/net/Makefile | 2 +- drivers/net/sunxi_emac.c | 521 +++++++++++++++++++++++++++++++++++++++++++++ drivers/net/sunxi_wemac.c | 525 ---------------------------------------------- include/netdev.h | 2 +- 4 files changed, 523 insertions(+), 527 deletions(-) create mode 100644 drivers/net/sunxi_emac.c delete mode 100644 drivers/net/sunxi_wemac.c
diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 6005f7e..da2b5f8 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_DNET) += dnet.o obj-$(CONFIG_E1000) += e1000.o obj-$(CONFIG_E1000_SPI) += e1000_spi.o obj-$(CONFIG_EEPRO100) += eepro100.o +obj-$(CONFIG_SUNXI_EMAC) += sunxi_emac.o obj-$(CONFIG_ENC28J60) += enc28j60.o obj-$(CONFIG_EP93XX) += ep93xx_eth.o obj-$(CONFIG_ETHOC) += ethoc.o @@ -51,7 +52,6 @@ obj-$(CONFIG_RTL8169) += rtl8169.o obj-$(CONFIG_SH_ETHER) += sh_eth.o obj-$(CONFIG_SMC91111) += smc91111.o obj-$(CONFIG_SMC911X) += smc911x.o -obj-$(CONFIG_SUNXI_WEMAC) += sunxi_wemac.o obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c new file mode 100644 index 0000000..5a06d68 --- /dev/null +++ b/drivers/net/sunxi_emac.c @@ -0,0 +1,521 @@ +/* + * sunxi_emac.c -- Allwinner A10 ethernet driver + * + * (C) Copyright 2012, Stefan Roese sr@denx.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/err.h> +#include <malloc.h> +#include <miiphy.h> +#include <net.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> + +/* EMAC register */ +struct emac_regs { + u32 ctl; /* 0x00 */ + u32 tx_mode; /* 0x04 */ + u32 tx_flow; /* 0x08 */ + u32 tx_ctl0; /* 0x0c */ + u32 tx_ctl1; /* 0x10 */ + u32 tx_ins; /* 0x14 */ + u32 tx_pl0; /* 0x18 */ + u32 tx_pl1; /* 0x1c */ + u32 tx_sta; /* 0x20 */ + u32 tx_io_data; /* 0x24 */ + u32 tx_io_data1;/* 0x28 */ + u32 tx_tsvl0; /* 0x2c */ + u32 tx_tsvh0; /* 0x30 */ + u32 tx_tsvl1; /* 0x34 */ + u32 tx_tsvh1; /* 0x38 */ + u32 rx_ctl; /* 0x3c */ + u32 rx_hash0; /* 0x40 */ + u32 rx_hash1; /* 0x44 */ + u32 rx_sta; /* 0x48 */ + u32 rx_io_data; /* 0x4c */ + u32 rx_fbc; /* 0x50 */ + u32 int_ctl; /* 0x54 */ + u32 int_sta; /* 0x58 */ + u32 mac_ctl0; /* 0x5c */ + u32 mac_ctl1; /* 0x60 */ + u32 mac_ipgt; /* 0x64 */ + u32 mac_ipgr; /* 0x68 */ + u32 mac_clrt; /* 0x6c */ + u32 mac_maxf; /* 0x70 */ + u32 mac_supp; /* 0x74 */ + u32 mac_test; /* 0x78 */ + u32 mac_mcfg; /* 0x7c */ + u32 mac_mcmd; /* 0x80 */ + u32 mac_madr; /* 0x84 */ + u32 mac_mwtd; /* 0x88 */ + u32 mac_mrdd; /* 0x8c */ + u32 mac_mind; /* 0x90 */ + u32 mac_ssrr; /* 0x94 */ + u32 mac_a0; /* 0x98 */ + u32 mac_a1; /* 0x9c */ +}; + +/* SRAMC register */ +struct sunxi_sramc_regs { + u32 ctrl0; + u32 ctrl1; +}; + +/* 0: Disable 1: Aborted frame enable(default) */ +#define EMAC_TX_AB_M (0x1 << 0) +/* 0: CPU 1: DMA(default) */ +#define EMAC_TX_TM (0x1 << 1) + +#define EMAC_TX_SETUP (0) + +/* 0: DRQ asserted 1: DRQ automatically(default) */ +#define EMAC_RX_DRQ_MODE (0x1 << 1) +/* 0: CPU 1: DMA(default) */ +#define EMAC_RX_TM (0x1 << 2) +/* 0: Normal(default) 1: Pass all Frames */ +#define EMAC_RX_PA (0x1 << 4) +/* 0: Normal(default) 1: Pass Control Frames */ +#define EMAC_RX_PCF (0x1 << 5) +/* 0: Normal(default) 1: Pass Frames with CRC Error */ +#define EMAC_RX_PCRCE (0x1 << 6) +/* 0: Normal(default) 1: Pass Frames with Length Error */ +#define EMAC_RX_PLE (0x1 << 7) +/* 0: Normal 1: Pass Frames length out of range(default) */ +#define EMAC_RX_POR (0x1 << 8) +/* 0: Not accept 1: Accept unicast Packets(default) */ +#define EMAC_RX_UCAD (0x1 << 16) +/* 0: Normal(default) 1: DA Filtering */ +#define EMAC_RX_DAF (0x1 << 17) +/* 0: Not accept 1: Accept multicast Packets(default) */ +#define EMAC_RX_MCO (0x1 << 20) +/* 0: Disable(default) 1: Enable Hash filter */ +#define EMAC_RX_MHF (0x1 << 21) +/* 0: Not accept 1: Accept Broadcast Packets(default) */ +#define EMAC_RX_BCO (0x1 << 22) +/* 0: Disable(default) 1: Enable SA Filtering */ +#define EMAC_RX_SAF (0x1 << 24) +/* 0: Normal(default) 1: Inverse Filtering */ +#define EMAC_RX_SAIF (0x1 << 25) + +#define EMAC_RX_SETUP (EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \ + EMAC_RX_MCO | EMAC_RX_BCO) + +/* 0: Disable 1: Enable Receive Flow Control(default) */ +#define EMAC_MAC_CTL0_RFC (0x1 << 2) +/* 0: Disable 1: Enable Transmit Flow Control(default) */ +#define EMAC_MAC_CTL0_TFC (0x1 << 3) + +#define EMAC_MAC_CTL0_SETUP (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC) + +/* 0: Disable 1: Enable MAC Frame Length Checking(default) */ +#define EMAC_MAC_CTL1_FLC (0x1 << 1) +/* 0: Disable(default) 1: Enable Huge Frame */ +#define EMAC_MAC_CTL1_HF (0x1 << 2) +/* 0: Disable(default) 1: Enable MAC Delayed CRC */ +#define EMAC_MAC_CTL1_DCRC (0x1 << 3) +/* 0: Disable 1: Enable MAC CRC(default) */ +#define EMAC_MAC_CTL1_CRC (0x1 << 4) +/* 0: Disable 1: Enable MAC PAD Short frames(default) */ +#define EMAC_MAC_CTL1_PC (0x1 << 5) +/* 0: Disable(default) 1: Enable MAC PAD Short frames and append CRC */ +#define EMAC_MAC_CTL1_VC (0x1 << 6) +/* 0: Disable(default) 1: Enable MAC auto detect Short frames */ +#define EMAC_MAC_CTL1_ADP (0x1 << 7) +/* 0: Disable(default) 1: Enable */ +#define EMAC_MAC_CTL1_PRE (0x1 << 8) +/* 0: Disable(default) 1: Enable */ +#define EMAC_MAC_CTL1_LPE (0x1 << 9) +/* 0: Disable(default) 1: Enable no back off */ +#define EMAC_MAC_CTL1_NB (0x1 << 12) +/* 0: Disable(default) 1: Enable */ +#define EMAC_MAC_CTL1_BNB (0x1 << 13) +/* 0: Disable(default) 1: Enable */ +#define EMAC_MAC_CTL1_ED (0x1 << 14) + +#define EMAC_MAC_CTL1_SETUP (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \ + EMAC_MAC_CTL1_PC) + +#define EMAC_MAC_IPGT 0x15 + +#define EMAC_MAC_NBTB_IPG1 0xc +#define EMAC_MAC_NBTB_IPG2 0x12 + +#define EMAC_MAC_CW 0x37 +#define EMAC_MAC_RM 0xf + +#define EMAC_MAC_MFL 0x0600 + +/* Receive status */ +#define EMAC_CRCERR (0x1 << 4) +#define EMAC_LENERR (0x3 << 5) + +#define DMA_CPU_TRRESHOLD 2000 + +struct emac_eth_dev { + u32 speed; + u32 duplex; + u32 phy_configured; + int link_printed; +}; + +struct emac_rxhdr { + s16 rx_len; + u16 rx_status; +}; + +static void emac_inblk_32bit(void *reg, void *data, int count) +{ + int cnt = (count + 3) >> 2; + + if (cnt) { + u32 *buf = data; + + do { + u32 x = readl(reg); + *buf++ = x; + } while (--cnt); + } +} + +static void emac_outblk_32bit(void *reg, void *data, int count) +{ + int cnt = (count + 3) >> 2; + + if (cnt) { + const u32 *buf = data; + + do { + writel(*buf++, reg); + } while (--cnt); + } +} + +/* Read a word from phyxcer */ +static int emac_phy_read(const char *devname, unsigned char addr, + unsigned char reg, unsigned short *value) +{ + struct eth_device *dev = eth_get_dev_by_name(devname); + struct emac_regs *regs = (struct emac_regs *)dev->iobase; + + /* issue the phy address and reg */ + writel(addr << 8 | reg, ®s->mac_madr); + + /* pull up the phy io line */ + writel(0x1, ®s->mac_mcmd); + + /* Wait read complete */ + mdelay(1); + + /* push down the phy io line */ + writel(0x0, ®s->mac_mcmd); + + /* and write data */ + *value = readl(®s->mac_mrdd); + + return 0; +} + +/* Write a word to phyxcer */ +static int emac_phy_write(const char *devname, unsigned char addr, + unsigned char reg, unsigned short value) +{ + struct eth_device *dev = eth_get_dev_by_name(devname); + struct emac_regs *regs = (struct emac_regs *)dev->iobase; + + /* issue the phy address and reg */ + writel(addr << 8 | reg, ®s->mac_madr); + + /* pull up the phy io line */ + writel(0x1, ®s->mac_mcmd); + + /* Wait write complete */ + mdelay(1); + + /* push down the phy io line */ + writel(0x0, ®s->mac_mcmd); + + /* and write data */ + writel(value, ®s->mac_mwtd); + + return 0; +} + +static void emac_setup(struct eth_device *dev) +{ + struct emac_regs *regs = (struct emac_regs *)dev->iobase; + u32 reg_val; + u16 phy_val; + u32 duplex_flag; + + /* Set up TX */ + writel(EMAC_TX_SETUP, ®s->tx_mode); + + /* Set up RX */ + writel(EMAC_RX_SETUP, ®s->rx_ctl); + + /* Set MAC */ + /* Set MAC CTL0 */ + writel(EMAC_MAC_CTL0_SETUP, ®s->mac_ctl0); + + /* Set MAC CTL1 */ + emac_phy_read(dev->name, 1, 0, &phy_val); + debug("PHY SETUP, reg 0 value: %x\n", phy_val); + duplex_flag = !!(phy_val & (1 << 8)); + + reg_val = 0; + if (duplex_flag) + reg_val = (0x1 << 0); + writel(EMAC_MAC_CTL1_SETUP | reg_val, ®s->mac_ctl1); + + /* Set up IPGT */ + writel(EMAC_MAC_IPGT, ®s->mac_ipgt); + + /* Set up IPGR */ + writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), ®s->mac_ipgr); + + /* Set up Collison window */ + writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), ®s->mac_clrt); + + /* Set up Max Frame Length */ + writel(EMAC_MAC_MFL, ®s->mac_maxf); +} + +static void emac_reset(struct eth_device *dev) +{ + struct emac_regs *regs = (struct emac_regs *)dev->iobase; + + debug("resetting device\n"); + + /* RESET device */ + writel(0, ®s->ctl); + udelay(200); + + writel(1, ®s->ctl); + udelay(200); +} + +static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd) +{ + struct emac_regs *regs = (struct emac_regs *)dev->iobase; + struct emac_eth_dev *priv = dev->priv; + u16 phy_reg; + + /* Init EMAC */ + + /* Flush RX FIFO */ + setbits_le32(®s->rx_ctl, 0x8); + udelay(1); + + /* Init MAC */ + + /* Soft reset MAC */ + clrbits_le32(®s->mac_ctl0, 0x1 << 15); + + /* Clear RX counter */ + writel(0x0, ®s->rx_fbc); + udelay(1); + + /* Set up EMAC */ + emac_setup(dev); + + writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 | + dev->enetaddr[2], ®s->mac_a1); + writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 | + dev->enetaddr[5], ®s->mac_a0); + + mdelay(1); + + emac_reset(dev); + + /* PHY POWER UP */ + emac_phy_read(dev->name, 1, 0, &phy_reg); + emac_phy_write(dev->name, 1, 0, phy_reg & (~(0x1 << 11))); + mdelay(1); + + emac_phy_read(dev->name, 1, 0, &phy_reg); + + priv->speed = miiphy_speed(dev->name, 0); + priv->duplex = miiphy_duplex(dev->name, 0); + + /* Print link status only once */ + if (!priv->link_printed) { + printf("ENET Speed is %d Mbps - %s duplex connection\n", + priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL"); + priv->link_printed = 1; + } + + /* Set EMAC SPEED depend on PHY */ + clrsetbits_le32(®s->mac_supp, 1 << 8, + ((phy_reg & (0x1 << 13)) >> 13) << 8); + + /* Set duplex depend on phy */ + clrsetbits_le32(®s->mac_ctl1, 1 << 0, + ((phy_reg & (0x1 << 8)) >> 8) << 0); + + /* Enable RX/TX */ + setbits_le32(®s->ctl, 0x7); + + return 0; +} + +static void sunxi_emac_eth_halt(struct eth_device *dev) +{ + /* Nothing to do here */ +} + +static int sunxi_emac_eth_recv(struct eth_device *dev) +{ + struct emac_regs *regs = (struct emac_regs *)dev->iobase; + struct emac_rxhdr rxhdr; + u32 rxcount; + u32 reg_val; + int rx_len; + int rx_status; + int good_packet; + + /* Check packet ready or not */ + + /* Race warning: The first packet might arrive with + * the interrupts disabled, but the second will fix + */ + rxcount = readl(®s->rx_fbc); + if (!rxcount) { + /* Had one stuck? */ + rxcount = readl(®s->rx_fbc); + if (!rxcount) + return 0; + } + + reg_val = readl(®s->rx_io_data); + if (reg_val != 0x0143414d) { + /* Disable RX */ + clrbits_le32(®s->ctl, 0x1 << 2); + + /* Flush RX FIFO */ + setbits_le32(®s->rx_ctl, 0x1 << 3); + while (readl(®s->rx_ctl) & (0x1 << 3)) + ; + + /* Enable RX */ + setbits_le32(®s->ctl, 0x1 << 2); + + return 0; + } + + /* A packet ready now + * Get status/length + */ + good_packet = 1; + + emac_inblk_32bit(®s->rx_io_data, &rxhdr, sizeof(rxhdr)); + + rx_len = rxhdr.rx_len; + rx_status = rxhdr.rx_status; + + /* Packet Status check */ + if (rx_len < 0x40) { + good_packet = 0; + debug("RX: Bad Packet (runt)\n"); + } + + /* rx_status is identical to RSR register. */ + if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) { + good_packet = 0; + if (rx_status & EMAC_CRCERR) + printf("crc error\n"); + if (rx_status & EMAC_LENERR) + printf("length error\n"); + } + + /* Move data from EMAC */ + if (good_packet) { + if (rx_len > DMA_CPU_TRRESHOLD) { + printf("Received packet is too big (len=%d)\n", rx_len); + } else { + emac_inblk_32bit((void *)®s->rx_io_data, + NetRxPackets[0], rx_len); + + /* Pass to upper layer */ + NetReceive(NetRxPackets[0], rx_len); + return rx_len; + } + } + + return 0; +} + +static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len) +{ + struct emac_regs *regs = (struct emac_regs *)dev->iobase; + + /* Select channel 0 */ + writel(0, ®s->tx_ins); + + /* Write packet */ + emac_outblk_32bit((void *)®s->tx_io_data, packet, len); + + /* Set TX len */ + writel(len, ®s->tx_pl0); + + /* Start translate from fifo to phy */ + setbits_le32(®s->tx_ctl0, 1); + + return 0; +} + +int sunxi_emac_initialize(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_sramc_regs *sram = + (struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE; + struct emac_regs *regs = + (struct emac_regs *)SUNXI_EMAC_BASE; + struct eth_device *dev; + struct emac_eth_dev *priv; + int pin; + + dev = malloc(sizeof(*dev)); + if (dev == NULL) + return -ENOMEM; + + priv = (struct emac_eth_dev *)malloc(sizeof(struct emac_eth_dev)); + if (!priv) { + free(dev); + return -ENOMEM; + } + + memset(dev, 0, sizeof(*dev)); + memset(priv, 0, sizeof(struct emac_eth_dev)); + + /* Map SRAM to EMAC */ + setbits_le32(&sram->ctrl1, 0x5 << 2); + + /* Configure pin mux settings for MII Ethernet */ + for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++) + sunxi_gpio_set_cfgpin(pin, SUNXI_GPA0_EMAC); + + /* Set up clock gating */ + setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC); + + /* Set MII clock */ + clrsetbits_le32(®s->mac_mcfg, 0xf << 2, 0xd << 2); + + dev->iobase = (int)regs; + dev->priv = priv; + dev->init = sunxi_emac_eth_init; + dev->halt = sunxi_emac_eth_halt; + dev->send = sunxi_emac_eth_send; + dev->recv = sunxi_emac_eth_recv; + strcpy(dev->name, "emac"); + + eth_register(dev); + + miiphy_register(dev->name, emac_phy_read, emac_phy_write); + + return 0; +} diff --git a/drivers/net/sunxi_wemac.c b/drivers/net/sunxi_wemac.c deleted file mode 100644 index 699a381..0000000 --- a/drivers/net/sunxi_wemac.c +++ /dev/null @@ -1,525 +0,0 @@ -/* - * sunxi_wemac.c -- Allwinner A10 ethernet driver - * - * (C) Copyright 2012, Stefan Roese sr@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <malloc.h> -#include <net.h> -#include <miiphy.h> -#include <linux/err.h> -#include <asm/io.h> -#include <asm/arch/clock.h> -#include <asm/arch/gpio.h> - -/* EMAC register */ -struct wemac_regs { - u32 ctl; /* 0x00 */ - u32 tx_mode; /* 0x04 */ - u32 tx_flow; /* 0x08 */ - u32 tx_ctl0; /* 0x0c */ - u32 tx_ctl1; /* 0x10 */ - u32 tx_ins; /* 0x14 */ - u32 tx_pl0; /* 0x18 */ - u32 tx_pl1; /* 0x1c */ - u32 tx_sta; /* 0x20 */ - u32 tx_io_data; /* 0x24 */ - u32 tx_io_data1; /* 0x28 */ - u32 tx_tsvl0; /* 0x2c */ - u32 tx_tsvh0; /* 0x30 */ - u32 tx_tsvl1; /* 0x34 */ - u32 tx_tsvh1; /* 0x38 */ - u32 rx_ctl; /* 0x3c */ - u32 rx_hash0; /* 0x40 */ - u32 rx_hash1; /* 0x44 */ - u32 rx_sta; /* 0x48 */ - u32 rx_io_data; /* 0x4c */ - u32 rx_fbc; /* 0x50 */ - u32 int_ctl; /* 0x54 */ - u32 int_sta; /* 0x58 */ - u32 mac_ctl0; /* 0x5c */ - u32 mac_ctl1; /* 0x60 */ - u32 mac_ipgt; /* 0x64 */ - u32 mac_ipgr; /* 0x68 */ - u32 mac_clrt; /* 0x6c */ - u32 mac_maxf; /* 0x70 */ - u32 mac_supp; /* 0x74 */ - u32 mac_test; /* 0x78 */ - u32 mac_mcfg; /* 0x7c */ - u32 mac_mcmd; /* 0x80 */ - u32 mac_madr; /* 0x84 */ - u32 mac_mwtd; /* 0x88 */ - u32 mac_mrdd; /* 0x8c */ - u32 mac_mind; /* 0x90 */ - u32 mac_ssrr; /* 0x94 */ - u32 mac_a0; /* 0x98 */ - u32 mac_a1; /* 0x9c */ -}; - -/* SRAMC register */ -struct sunxi_sramc_regs { - u32 ctrl0; - u32 ctrl1; -}; - -/* 0: Disable 1: Aborted frame enable(default) */ -#define EMAC_TX_AB_M (0x1 << 0) -/* 0: CPU 1: DMA(default) */ -#define EMAC_TX_TM (0x1 << 1) - -#define EMAC_TX_SETUP (0) - -/* 0: DRQ asserted 1: DRQ automatically(default) */ -#define EMAC_RX_DRQ_MODE (0x1 << 1) -/* 0: CPU 1: DMA(default) */ -#define EMAC_RX_TM (0x1 << 2) -/* 0: Normal(default) 1: Pass all Frames */ -#define EMAC_RX_PA (0x1 << 4) -/* 0: Normal(default) 1: Pass Control Frames */ -#define EMAC_RX_PCF (0x1 << 5) -/* 0: Normal(default) 1: Pass Frames with CRC Error */ -#define EMAC_RX_PCRCE (0x1 << 6) -/* 0: Normal(default) 1: Pass Frames with Length Error */ -#define EMAC_RX_PLE (0x1 << 7) -/* 0: Normal 1: Pass Frames length out of range(default) */ -#define EMAC_RX_POR (0x1 << 8) -/* 0: Not accept 1: Accept unicast Packets(default) */ -#define EMAC_RX_UCAD (0x1 << 16) -/* 0: Normal(default) 1: DA Filtering */ -#define EMAC_RX_DAF (0x1 << 17) -/* 0: Not accept 1: Accept multicast Packets(default) */ -#define EMAC_RX_MCO (0x1 << 20) -/* 0: Disable(default) 1: Enable Hash filter */ -#define EMAC_RX_MHF (0x1 << 21) -/* 0: Not accept 1: Accept Broadcast Packets(default) */ -#define EMAC_RX_BCO (0x1 << 22) -/* 0: Disable(default) 1: Enable SA Filtering */ -#define EMAC_RX_SAF (0x1 << 24) -/* 0: Normal(default) 1: Inverse Filtering */ -#define EMAC_RX_SAIF (0x1 << 25) - -#define EMAC_RX_SETUP (EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \ - EMAC_RX_MCO | EMAC_RX_BCO) - -/* 0: Disable 1: Enable Receive Flow Control(default) */ -#define EMAC_MAC_CTL0_RFC (0x1 << 2) -/* 0: Disable 1: Enable Transmit Flow Control(default) */ -#define EMAC_MAC_CTL0_TFC (0x1 << 3) - -#define EMAC_MAC_CTL0_SETUP (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC) - -/* 0: Disable 1: Enable MAC Frame Length Checking(default) */ -#define EMAC_MAC_CTL1_FLC (0x1 << 1) -/* 0: Disable(default) 1: Enable Huge Frame */ -#define EMAC_MAC_CTL1_HF (0x1 << 2) -/* 0: Disable(default) 1: Enable MAC Delayed CRC */ -#define EMAC_MAC_CTL1_DCRC (0x1 << 3) -/* 0: Disable 1: Enable MAC CRC(default) */ -#define EMAC_MAC_CTL1_CRC (0x1 << 4) -/* 0: Disable 1: Enable MAC PAD Short frames(default) */ -#define EMAC_MAC_CTL1_PC (0x1 << 5) -/* 0: Disable(default) 1: Enable MAC PAD Short frames and append CRC */ -#define EMAC_MAC_CTL1_VC (0x1 << 6) -/* 0: Disable(default) 1: Enable MAC auto detect Short frames */ -#define EMAC_MAC_CTL1_ADP (0x1 << 7) -/* 0: Disable(default) 1: Enable */ -#define EMAC_MAC_CTL1_PRE (0x1 << 8) -/* 0: Disable(default) 1: Enable */ -#define EMAC_MAC_CTL1_LPE (0x1 << 9) -/* 0: Disable(default) 1: Enable no back off */ -#define EMAC_MAC_CTL1_NB (0x1 << 12) -/* 0: Disable(default) 1: Enable */ -#define EMAC_MAC_CTL1_BNB (0x1 << 13) -/* 0: Disable(default) 1: Enable */ -#define EMAC_MAC_CTL1_ED (0x1 << 14) - -#define EMAC_MAC_CTL1_SETUP (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \ - EMAC_MAC_CTL1_PC) - -#define EMAC_MAC_IPGT 0x15 - -#define EMAC_MAC_NBTB_IPG1 0xC -#define EMAC_MAC_NBTB_IPG2 0x12 - -#define EMAC_MAC_CW 0x37 -#define EMAC_MAC_RM 0xF - -#define EMAC_MAC_MFL 0x0600 - -/* Receive status */ -#define EMAC_CRCERR (1 << 4) -#define EMAC_LENERR (3 << 5) - -#define DMA_CPU_TRRESHOLD 2000 - -struct wemac_eth_dev { - u32 speed; - u32 duplex; - u32 phy_configured; - int link_printed; -}; - -struct wemac_rxhdr { - s16 rx_len; - u16 rx_status; -}; - -static void wemac_inblk_32bit(void *reg, void *data, int count) -{ - int cnt = (count + 3) >> 2; - - if (cnt) { - u32 *buf = data; - - do { - u32 x = readl(reg); - *buf++ = x; - } while (--cnt); - } -} - -static void wemac_outblk_32bit(void *reg, void *data, int count) -{ - int cnt = (count + 3) >> 2; - - if (cnt) { - const u32 *buf = data; - - do { - writel(*buf++, reg); - } while (--cnt); - } -} - -/* - * Read a word from phyxcer - */ -static int wemac_phy_read(const char *devname, unsigned char addr, - unsigned char reg, unsigned short *value) -{ - struct eth_device *dev = eth_get_dev_by_name(devname); - struct wemac_regs *regs = (struct wemac_regs *)dev->iobase; - - /* issue the phy address and reg */ - writel(addr << 8 | reg, ®s->mac_madr); - - /* pull up the phy io line */ - writel(0x1, ®s->mac_mcmd); - - /* Wait read complete */ - mdelay(1); - - /* push down the phy io line */ - writel(0x0, ®s->mac_mcmd); - - /* and write data */ - *value = readl(®s->mac_mrdd); - - return 0; -} - -/* - * Write a word to phyxcer - */ -static int wemac_phy_write(const char *devname, unsigned char addr, - unsigned char reg, unsigned short value) -{ - struct eth_device *dev = eth_get_dev_by_name(devname); - struct wemac_regs *regs = (struct wemac_regs *)dev->iobase; - - /* issue the phy address and reg */ - writel(addr << 8 | reg, ®s->mac_madr); - - /* pull up the phy io line */ - writel(0x1, ®s->mac_mcmd); - - /* Wait write complete */ - mdelay(1); - - /* push down the phy io line */ - writel(0x0, ®s->mac_mcmd); - - /* and write data */ - writel(value, ®s->mac_mwtd); - - return 0; -} - -static void emac_setup(struct eth_device *dev) -{ - struct wemac_regs *regs = (struct wemac_regs *)dev->iobase; - u32 reg_val; - u16 phy_val; - u32 duplex_flag; - - /* Set up TX */ - writel(EMAC_TX_SETUP, ®s->tx_mode); - - /* Set up RX */ - writel(EMAC_RX_SETUP, ®s->rx_ctl); - - /* Set MAC */ - /* Set MAC CTL0 */ - writel(EMAC_MAC_CTL0_SETUP, ®s->mac_ctl0); - - /* Set MAC CTL1 */ - wemac_phy_read(dev->name, 1, 0, &phy_val); - debug("PHY SETUP, reg 0 value: %x\n", phy_val); - duplex_flag = !!(phy_val & (1 << 8)); - - reg_val = 0; - if (duplex_flag) - reg_val = (0x1 << 0); - writel(EMAC_MAC_CTL1_SETUP | reg_val, ®s->mac_ctl1); - - /* Set up IPGT */ - writel(EMAC_MAC_IPGT, ®s->mac_ipgt); - - /* Set up IPGR */ - writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), ®s->mac_ipgr); - - /* Set up Collison window */ - writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), ®s->mac_clrt); - - /* Set up Max Frame Length */ - writel(EMAC_MAC_MFL, ®s->mac_maxf); -} - -static void wemac_reset(struct eth_device *dev) -{ - struct wemac_regs *regs = (struct wemac_regs *)dev->iobase; - - debug("resetting device\n"); - - /* RESET device */ - writel(0, ®s->ctl); - udelay(200); - - writel(1, ®s->ctl); - udelay(200); -} - -static int sunxi_wemac_eth_init(struct eth_device *dev, bd_t *bd) -{ - struct wemac_regs *regs = (struct wemac_regs *)dev->iobase; - struct wemac_eth_dev *priv = dev->priv; - u16 phy_reg; - - /* Init EMAC */ - - /* Flush RX FIFO */ - setbits_le32(®s->rx_ctl, 0x8); - udelay(1); - - /* Init MAC */ - - /* Soft reset MAC */ - clrbits_le32(®s->mac_ctl0, 1 << 15); - - /* Set MII clock */ - clrsetbits_le32(®s->mac_mcfg, 0xf << 2, 0xd << 2); - - /* Clear RX counter */ - writel(0x0, ®s->rx_fbc); - udelay(1); - - /* Set up EMAC */ - emac_setup(dev); - - writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 | - dev->enetaddr[2], ®s->mac_a1); - writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 | - dev->enetaddr[5], ®s->mac_a0); - - mdelay(1); - - wemac_reset(dev); - - /* PHY POWER UP */ - wemac_phy_read(dev->name, 1, 0, &phy_reg); - wemac_phy_write(dev->name, 1, 0, phy_reg & (~(1 << 11))); - mdelay(1); - - wemac_phy_read(dev->name, 1, 0, &phy_reg); - - priv->speed = miiphy_speed(dev->name, 0); - priv->duplex = miiphy_duplex(dev->name, 0); - - /* Print link status only once */ - if (!priv->link_printed) { - printf("ENET Speed is %d Mbps - %s duplex connection\n", - priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL"); - priv->link_printed = 1; - } - - /* Set EMAC SPEED depend on PHY */ - clrsetbits_le32(®s->mac_supp, 1 << 8, - ((phy_reg & (1 << 13)) >> 13) << 8); - - /* Set duplex depend on phy */ - clrsetbits_le32(®s->mac_ctl1, 1 << 0, - ((phy_reg & (1 << 8)) >> 8) << 0); - - /* Enable RX/TX */ - setbits_le32(®s->ctl, 0x7); - - return 0; -} - -static void sunxi_wemac_eth_halt(struct eth_device *dev) -{ - /* Nothing to do here */ -} - -static int sunxi_wemac_eth_recv(struct eth_device *dev) -{ - struct wemac_regs *regs = (struct wemac_regs *)dev->iobase; - struct wemac_rxhdr rxhdr; - u32 rxcount; - u32 reg_val; - int rx_len; - int rx_status; - int good_packet; - - /* Check packet ready or not */ - - /* - * Race warning: The first packet might arrive with - * the interrupts disabled, but the second will fix - */ - rxcount = readl(®s->rx_fbc); - if (!rxcount) { - /* Had one stuck? */ - rxcount = readl(®s->rx_fbc); - if (!rxcount) - return 0; - } - - reg_val = readl(®s->rx_io_data); - if (reg_val != 0x0143414d) { - /* Disable RX */ - clrbits_le32(®s->ctl, 1 << 2); - - /* Flush RX FIFO */ - setbits_le32(®s->rx_ctl, 1 << 3); - while (readl(®s->rx_ctl) & (1 << 3)) - ; - - /* Enable RX */ - setbits_le32(®s->ctl, 1 << 2); - - return 0; - } - - /* - * A packet ready now - * Get status/length - */ - good_packet = 1; - - wemac_inblk_32bit(®s->rx_io_data, &rxhdr, sizeof(rxhdr)); - - rx_len = rxhdr.rx_len; - rx_status = rxhdr.rx_status; - - /* Packet Status check */ - if (rx_len < 0x40) { - good_packet = 0; - debug("RX: Bad Packet (runt)\n"); - } - - /* rx_status is identical to RSR register. */ - if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) { - good_packet = 0; - if (rx_status & EMAC_CRCERR) - printf("crc error\n"); - if (rx_status & EMAC_LENERR) - printf("length error\n"); - } - - /* Move data from WEMAC */ - if (good_packet) { - if (rx_len > DMA_CPU_TRRESHOLD) { - printf("Received packet is too big (len=%d)\n", rx_len); - } else { - wemac_inblk_32bit((void *)®s->rx_io_data, - NetRxPackets[0], rx_len); - - /* Pass to upper layer */ - NetReceive(NetRxPackets[0], rx_len); - return rx_len; - } - } - - return 0; -} - -static int sunxi_wemac_eth_send(struct eth_device *dev, void *packet, int len) -{ - struct wemac_regs *regs = (struct wemac_regs *)dev->iobase; - - /* Select channel 0 */ - writel(0, ®s->tx_ins); - - /* Write packet */ - wemac_outblk_32bit((void *)®s->tx_io_data, packet, len); - - /* Set TX len */ - writel(len, ®s->tx_pl0); - - /* Start translate from fifo to phy */ - setbits_le32(®s->tx_ctl0, 1); - - return 0; -} - -int sunxi_wemac_initialize(void) -{ - struct sunxi_ccm_reg *const ccm = - (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - struct sunxi_sramc_regs *sram = - (struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE; - struct eth_device *dev; - struct wemac_eth_dev *priv; - int pin; - - dev = malloc(sizeof(*dev)); - if (dev == NULL) - return -ENOMEM; - - priv = (struct wemac_eth_dev *)malloc(sizeof(struct wemac_eth_dev)); - if (!priv) { - free(dev); - return -ENOMEM; - } - - memset(dev, 0, sizeof(*dev)); - memset(priv, 0, sizeof(struct wemac_eth_dev)); - - /* Map SRAM to EMAC */ - setbits_le32(&sram->ctrl1, 0x5 << 2); - - /* Configure pin mux settings for MII Ethernet */ - for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++) - sunxi_gpio_set_cfgpin(pin, 2); - - /* Set up clock gating */ - setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_EMAC); - - dev->iobase = SUNXI_EMAC_BASE; - dev->priv = priv; - dev->init = sunxi_wemac_eth_init; - dev->halt = sunxi_wemac_eth_halt; - dev->send = sunxi_wemac_eth_send; - dev->recv = sunxi_wemac_eth_recv; - strcpy(dev->name, "wemac"); - - eth_register(dev); - - miiphy_register(dev->name, wemac_phy_read, wemac_phy_write); - - return 0; -} diff --git a/include/netdev.h b/include/netdev.h index 63481ec..e45dd7a 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -78,8 +78,8 @@ int sh_eth_initialize(bd_t *bis); int skge_initialize(bd_t *bis); int smc91111_initialize(u8 dev_num, int base_addr); int smc911x_initialize(u8 dev_num, int base_addr); +int sunxi_emac_initialize(bd_t *bis); int sunxi_gmac_initialize(bd_t *bis); -int sunxi_wemac_initialize(bd_t *bis); int tsi108_eth_initialize(bd_t *bis); int uec_standard_init(bd_t *bis); int uli526x_initialize(bd_t *bis);