Re: [U-Boot] [U-Boot, 2/6, v2] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module

On Tue, May 07, 2013 at 04:30:46PM +0800, Liu Gang wrote:

Currently, the macro "CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER" can enable the master module of Boot from SRIO and PCIE on a platform. But this is not a silicon feature, it's just a specific booting mode based on the SRIO and PCIE interfaces. So it's inappropriate to put the macro into the file arch/powerpc/include/asm/config_mpc85xx.h.

Change the macro "CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER" to "CONFIG_SRIO_PCIE_BOOT_MASTER", remove them from arch/powerpc/include/asm/config_mpc85xx.h file, and add those macros in configuration header file of each board which can support the master module of Boot from SRIO and PCIE.

Signed-off-by: Liu Gang Gang.Liu@freescale.com

Applied, thanks!

Andy