This patch fixed the add_dataflash return logic, so-that it can handle both jedec and older chips same as Linux.
Cc: Bin Meng bmeng.cn@gmail.com Cc: Simon Glass sjg@chromium.org Cc: York Sun york.sun@nxp.com Cc: Haikun Wang haikun.wang@freescale.com Signed-off-by: Jagan Teki jteki@openedev.com --- drivers/mtd/spi-nor/sf_dataflash.c | 127 ++++++++++++++++++------------------- 1 file changed, 61 insertions(+), 66 deletions(-)
diff --git a/drivers/mtd/spi-nor/sf_dataflash.c b/drivers/mtd/spi-nor/sf_dataflash.c index 7c6c8d2..212aa69 100644 --- a/drivers/mtd/spi-nor/sf_dataflash.c +++ b/drivers/mtd/spi-nor/sf_dataflash.c @@ -586,15 +586,15 @@ static int spi_dataflash_probe(struct udevice *dev) struct spi_slave *spi = dev_get_parent_priv(dev); struct spi_flash *spi_flash; struct flash_info *info; - int ret, status = 0; + int status;
spi_flash = dev_get_uclass_priv(dev); spi_flash->spi = spi; spi_flash->dev = dev;
- ret = spi_claim_bus(spi); - if (ret) - return ret; + status = spi_claim_bus(spi); + if (status) + return status;
/* * Try to detect dataflash by JEDEC ID. @@ -605,74 +605,69 @@ static int spi_dataflash_probe(struct udevice *dev) */ info = jedec_probe(spi); if (IS_ERR(info)) - return PTR_ERR(info); - if (info != NULL) - add_dataflash(dev, info->name, info->nr_pages, - info->pagesize, info->pageoffset, - (info->flags & SUP_POW2PS) ? 'd' : 'c'); - else { - /* - * Older chips support only legacy commands, identifing - * capacity using bits in the status byte. - */ - status = dataflash_status(spi); - if (status <= 0 || status == 0xff) { - printf("SPI DataFlash: read status error %d\n", status); - if (status == 0 || status == 0xff) - status = -ENODEV; - goto err_read_cmd; - } - /* - * if there's a device there, assume it's dataflash. - * board setup should have set spi->max_speed_max to - * match f(car) for continuous reads, mode 0 or 3. - */ - switch (status & 0x3c) { - case 0x0c: /* 0 0 1 1 x x */ - status = add_dataflash(dev, "AT45DB011B", - 512, 264, 9, 0); - break; - case 0x14: /* 0 1 0 1 x x */ - status = add_dataflash(dev, "AT45DB021B", - 1024, 264, 9, 0); - break; - case 0x1c: /* 0 1 1 1 x x */ - status = add_dataflash(dev, "AT45DB041x", - 2048, 264, 9, 0); - break; - case 0x24: /* 1 0 0 1 x x */ - status = add_dataflash(dev, "AT45DB081B", - 4096, 264, 9, 0); - break; - case 0x2c: /* 1 0 1 1 x x */ - status = add_dataflash(dev, "AT45DB161x", - 4096, 528, 10, 0); - break; - case 0x34: /* 1 1 0 1 x x */ - status = add_dataflash(dev, "AT45DB321x", - 8192, 528, 10, 0); - break; - case 0x38: /* 1 1 1 x x x */ - case 0x3c: - status = add_dataflash(dev, "AT45DB642x", - 8192, 1056, 11, 0); - break; - /* obsolete AT45DB1282 not (yet?) supported */ - default: - dev_info(&spi->dev, "unsupported device (%x)\n", - status & 0x3c); + goto err_jedec_probe; + if (info != NULL) { + status = add_dataflash(dev, info->name, info->nr_pages, + info->pagesize, info->pageoffset, + (info->flags & SUP_POW2PS) ? 'd' : 'c'); + if (status < 0) + goto err_status; + } + + /* + * Older chips support only legacy commands, identifing + * capacity using bits in the status byte. + */ + status = dataflash_status(spi); + if (status <= 0 || status == 0xff) { + printf("SPI DataFlash: read status error %d\n", status); + if (status == 0 || status == 0xff) status = -ENODEV; - goto err_read_cmd; - } + goto err_jedec_probe; }
- spi_release_bus(spi); + /* + * if there's a device there, assume it's dataflash. + * board setup should have set spi->max_speed_max to + * match f(car) for continuous reads, mode 0 or 3. + */ + switch (status & 0x3c) { + case 0x0c: /* 0 0 1 1 x x */ + status = add_dataflash(dev, "AT45DB011B", 512, 264, 9, 0); + break; + case 0x14: /* 0 1 0 1 x x */ + status = add_dataflash(dev, "AT45DB021B", 1024, 264, 9, 0); + break; + case 0x1c: /* 0 1 1 1 x x */ + status = add_dataflash(dev, "AT45DB041x", 2048, 264, 9, 0); + break; + case 0x24: /* 1 0 0 1 x x */ + status = add_dataflash(dev, "AT45DB081B", 4096, 264, 9, 0); + break; + case 0x2c: /* 1 0 1 1 x x */ + status = add_dataflash(dev, "AT45DB161x", 4096, 528, 10, 0); + break; + case 0x34: /* 1 1 0 1 x x */ + status = add_dataflash(dev, "AT45DB321x", 8192, 528, 10, 0); + break; + case 0x38: /* 1 1 1 x x x */ + case 0x3c: + status = add_dataflash(dev, "AT45DB642x", 8192, 1056, 11, 0); + break; + /* obsolete AT45DB1282 not (yet?) supported */ + default: + dev_info(&spi->dev, "unsupported device (%x)\n", + status & 0x3c); + status = -ENODEV; + goto err_status; + }
- return 0; + return status;
-err_read_cmd: +err_status: + spi_free_slave(spi); +err_jedec_probe: spi_release_bus(spi); - return status; }