At this point in time, DM is always enabled. So if MMC is enabled, it should select DM_MMC. No drivers need to depend on DM_MMC being enabled now, so remove that from dependency lists. This now means that a number of platforms which select'd DM_MMC need to select MMC instead.
Signed-off-by: Tom Rini trini@konsulko.com Reviewed-by: Peter Robinson pbrobinson@gmail.com --- Changes in v2: - None. --- arch/Kconfig | 2 +- arch/arm/Kconfig | 18 +++------ arch/arm/mach-exynos/Kconfig | 8 ++-- arch/arm/mach-imx/mx5/Kconfig | 2 +- arch/arm/mach-imx/mx6/Kconfig | 32 +++++++-------- arch/arm/mach-omap2/omap3/Kconfig | 2 +- arch/arm/mach-s5pc1xx/Kconfig | 2 +- arch/arm/mach-tegra/Kconfig | 2 +- drivers/mmc/Kconfig | 65 +++++++++++-------------------- 9 files changed, 52 insertions(+), 81 deletions(-)
diff --git a/arch/Kconfig b/arch/Kconfig index bb2e7bedd106..14e914366593 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -180,13 +180,13 @@ config SANDBOX select DM_GPIO select DM_I2C select DM_KEYBOARD - select DM_MMC select DM_SERIAL select DM_SPI select DM_SPI_FLASH select GZIP_COMPRESSED select IO_TRACE select LZO + select MMC select MTD select OF_BOARD_SETUP select PCI_ENDPOINT diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3ed9494dfe4e..127241e608c4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1164,7 +1164,6 @@ config ARCH_SUNXI select DM_SPI if SPI select DM_SPI_FLASH if SPI && MTD select DM_KEYBOARD - select DM_MMC if MMC select DM_SERIAL select OF_BOARD_SETUP select OF_CONTROL @@ -1212,7 +1211,6 @@ config ARCH_U8500 select CPU_V7A select DM select DM_GPIO - select DM_MMC if MMC select DM_SERIAL select DM_USB_GADGET if DM_USB select OF_CONTROL @@ -1237,7 +1235,6 @@ config ARCH_VERSAL select ARM64 select CLK select DM - select DM_MMC if MMC select DM_SERIAL select GICV3 select OF_CONTROL @@ -1250,7 +1247,6 @@ config ARCH_VERSAL2 select ARM64 select CLK select DM - select DM_MMC if MMC select DM_SERIAL select OF_CONTROL imply BOARD_LATE_INIT @@ -1262,7 +1258,6 @@ config ARCH_VERSAL_NET select ARM64 select CLK select DM - select DM_MMC if MMC select DM_SERIAL select OF_CONTROL imply BOARD_LATE_INIT @@ -1287,7 +1282,6 @@ config ARCH_ZYNQ select CPU_V7A select DEBUG_UART_BOARD_INIT if SPL && DEBUG_UART select DM - select DM_MMC if MMC select DM_SERIAL select DM_SPI select DM_SPI_FLASH @@ -1316,7 +1310,6 @@ config ARCH_ZYNQMP_R5 select CLK select CPU_V7R select DM - select DM_MMC if MMC select DM_SERIAL select OF_CONTROL imply CMD_DM @@ -1330,7 +1323,6 @@ config ARCH_ZYNQMP select DM select DEBUG_UART_BOARD_INIT if SPL && DEBUG_UART imply DM_MAILBOX - select DM_MMC if MMC select DM_SERIAL select MTD select DM_SPI if SPI @@ -1398,8 +1390,8 @@ config TARGET_TOTAL_COMPUTE select PL01X_SERIAL select DM select DM_SERIAL - select DM_MMC select DM_GPIO + select MMC imply OF_HAS_PRIOR_STAGE imply MISC_INIT_R
@@ -1905,7 +1897,7 @@ config TARGET_SL28 select DM select DM_GPIO select DM_I2C - select DM_MMC + select MMC select MTD select DM_SPI_FLASH select DM_MDIO @@ -1946,10 +1938,10 @@ config ARCH_UNIPHIER select DM select DM_GPIO select DM_I2C - select DM_MMC select DM_MTD select DM_RESET select DM_SERIAL + select MMC select OF_BOARD_SETUP select OF_CONTROL select OF_LIBFDT @@ -1993,9 +1985,9 @@ config ARCH_STI select BLK select CPU_V7A select DM - select DM_MMC select DM_RESET select DM_SERIAL + select MMC imply CMD_DM help Support for STMicroelectronics STiH407/10 SoC family. @@ -2042,7 +2034,6 @@ config ARCH_ROCKCHIP select DM select DM_GPIO select DM_I2C - select DM_MMC select DM_PWM select DM_REGULATOR select DM_SERIAL @@ -2051,6 +2042,7 @@ config ARCH_ROCKCHIP select DM_USB_GADGET if USB_DWC3_GADGET select ENABLE_ARM_SOC_BOOT0_HOOK select OF_CONTROL + select MMC select MTD select SPI select SPL_DM if SPL diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 3fee5a4299b8..7e6959510087 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -19,7 +19,7 @@ config ARCH_EXYNOS4 select BOARD_EARLY_INIT_F select CPU_V7A select BLK - select DM_MMC + select MMC help Samsung Exynos4 SoC family are based on ARM Cortex-A9 CPU. There are multiple SoCs in this family including Exynos4210, Exynos4412, @@ -40,7 +40,7 @@ config ARCH_EXYNOS5 imply USB_ETHER_RTL8152 imply USB_ETHER_SMSC95XX select BLK - select DM_MMC + select MMC
help Samsung Exynos5 SoC family are based on ARM Cortex-A15 CPU (and @@ -52,7 +52,7 @@ config ARCH_EXYNOS7 select ARM64 select BOARD_EARLY_INIT_F select BLK - select DM_MMC + select MMC help Samsung Exynos7 SoC family are based on ARM Cortex-A57 CPU or Cortex-A53 CPU (and some in a big.LITTLE configuration). There are @@ -62,7 +62,7 @@ config ARCH_EXYNOS9 bool "Exynos9 SoC family" select ARM64 select BLK - select DM_MMC + select MMC help Samsung Exynos9 SoC family are based on ARMv8 Cortex CPU. There are multiple SoCs in this family including Exynos850. diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig index d282663dcf1f..4d1e07b14d32 100644 --- a/arch/arm/mach-imx/mx5/Kconfig +++ b/arch/arm/mach-imx/mx5/Kconfig @@ -26,9 +26,9 @@ config TARGET_KP_IMX53 select DM_I2C select DM_PMIC select DM_SERIAL - select DM_MMC select BLK select DM_REGULATOR + select MMC select MX53 imply CMD_DM
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 1f8022ee6853..4020e16d92dc 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -81,8 +81,8 @@ config MX6UL_OPOS6UL select BOARD_LATE_INIT select DM select DM_GPIO - select DM_MMC select DM_THERMAL + select MMC select SPL_DM if SPL select SPL_OF_CONTROL if SPL select SPL_PINCTRL if SPL @@ -176,9 +176,9 @@ config TARGET_DART_6UL select DM select DM_GPIO select DM_I2C - select DM_MMC select DM_SERIAL select DM_THERMAL + select MMC select SUPPORT_SPL
config TARGET_DHCOMIMX6 @@ -197,10 +197,10 @@ config TARGET_DISPLAY5 depends on MX6Q select DM select DM_I2C - select DM_MMC select DM_SPI select DM_GPIO select DM_SERIAL + select MMC select MTD select SUPPORT_SPL imply CMD_DM @@ -245,7 +245,7 @@ config TARGET_KOSAGI_NOVENA bool "Kosagi Novena" select BOARD_LATE_INIT select DM_GPIO - select DM_MMC + select MMC select PCI select SCSI select VIDEO @@ -280,8 +280,8 @@ config TARGET_MX6LOGICPD select DM select DM_GPIO select DM_I2C - select DM_MMC select DM_PMIC + select MMC select OF_CONTROL imply CMD_DM
@@ -300,10 +300,10 @@ config TARGET_MX6DL_MAMOJ select DM select DM_GPIO select DM_I2C - select DM_MMC select DM_PMIC select DM_PMIC_PFUZE100 select DM_THERMAL + select MMC select OF_CONTROL select PINCTRL select SPL @@ -332,8 +332,8 @@ config TARGET_MX6Q_ENGICAM select DM select DM_GPIO select DM_I2C - select DM_MMC select DM_THERMAL + select MMC select OF_CONTROL select SPL_DM if SPL select SPL_OF_CONTROL if SPL @@ -352,8 +352,8 @@ config TARGET_MX6Q_ACC select DM select DM_GPIO select DM_I2C - select DM_MMC select DM_THERMAL + select MMC select SUPPORT_SPL
config TARGET_MX6S_SIELAFF @@ -453,8 +453,8 @@ config TARGET_MX6UL_ENGICAM select DM select DM_GPIO select DM_I2C - select DM_MMC select DM_THERMAL + select MMC select OF_CONTROL select SPL_DM if SPL select SPL_OF_CONTROL if SPL @@ -490,9 +490,9 @@ config TARGET_MYS_6ULX select DM select DM_GPIO select DM_I2C - select DM_MMC select DM_SERIAL select DM_THERMAL + select MMC select SUPPORT_SPL
config TARGET_NITROGEN6X @@ -507,10 +507,10 @@ config TARGET_NPI_IMX6ULL bool "Seeed NPI-IMX6ULL" depends on MX6ULL select DM - select DM_MMC select DM_GPIO select DM_SERIAL select DM_THERMAL + select MMC select SUPPORT_SPL
config TARGET_OPOS6ULDEV @@ -566,9 +566,9 @@ config TARGET_PCL063 select DM select DM_GPIO select DM_I2C - select DM_MMC select DM_SERIAL select DM_THERMAL + select MMC select SUPPORT_SPL
config TARGET_PCL063_ULL @@ -577,9 +577,9 @@ config TARGET_PCL063_ULL select DM select DM_GPIO select DM_I2C - select DM_MMC select DM_SERIAL select DM_THERMAL + select MMC select SUPPORT_SPL
config TARGET_SOMLABS_VISIONSOM_6ULL @@ -588,9 +588,9 @@ config TARGET_SOMLABS_VISIONSOM_6ULL select BOARD_LATE_INIT select DM select DM_GPIO - select DM_MMC select DM_SERIAL select DM_THERMAL + select MMC imply CMD_DM
config TARGET_TBS2910 @@ -605,7 +605,7 @@ config TARGET_KP_IMX6Q_TPC select DM select SPL_DM if SPL select DM_THERMAL - select DM_MMC + select MMC select DM_REGULATOR select SPL_DM_REGULATOR if SPL select DM_SERIAL @@ -673,7 +673,7 @@ config TARGET_BRPPT2 select DM select DM_GPIO select DM_I2C - select DM_MMC + select MMC select SUPPORT_SPL select SPL_DM if SPL select SPL_OF_CONTROL if SPL diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig index f15f44fe7d4b..a175e5ce6edc 100644 --- a/arch/arm/mach-omap2/omap3/Kconfig +++ b/arch/arm/mach-omap2/omap3/Kconfig @@ -30,8 +30,8 @@ config TARGET_AM3517_EVM select DM select DM_GPIO select DM_I2C - select DM_MMC select DM_SERIAL + select MMC imply CMD_DM
config TARGET_CM_T35 diff --git a/arch/arm/mach-s5pc1xx/Kconfig b/arch/arm/mach-s5pc1xx/Kconfig index b6a4b0b653fb..b15b2e7b6a01 100644 --- a/arch/arm/mach-s5pc1xx/Kconfig +++ b/arch/arm/mach-s5pc1xx/Kconfig @@ -8,8 +8,8 @@ config TARGET_S5P_GONI bool "S5P Goni board" select OF_CONTROL select BLK - select DM_MMC select MISC_COMMON + select MMC
config TARGET_SMDKC100 bool "Support smdkc100 board" diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 04612895576a..78b89729f191 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -48,13 +48,13 @@ config TEGRA_COMMON select DM_GPIO select DM_I2C select DM_KEYBOARD - select DM_MMC select DM_PWM select DM_RESET select DM_SERIAL select DM_SPI select DM_SPI_FLASH select MISC + select MMC select MTD select OF_CONTROL select SPI diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 9f2fecce3826..46513db0d6e3 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -3,7 +3,7 @@ menu "MMC Host controller Support" config MMC bool "MMC/SD/SDIO card support" default ARM || PPC || SANDBOX - select DM_MMC if DM + select DM_MMC help This selects MultiMediaCard, Secure Digital and Secure Digital I/O support. @@ -39,14 +39,14 @@ config MMC_BROKEN_CD If card detection feature is broken, just poll to detect.
config DM_MMC - bool "Enable MMC controllers using Driver Model" + bool depends on DM help - This enables the MultiMediaCard (MMC) uclass which supports MMC and - Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.) - and non-removable (e.g. eMMC chip) devices are supported. These - appear as block devices in U-Boot and can support filesystems such - as EXT4 and FAT. + This enables the MultiMediaCard (MMC) driver model uclass which + supports MMC and Secure Digital I/O (SDIO) cards. Both removable (SD, + micro-SD, etc.) and non-removable (e.g. eMMC chip) devices are + supported. These appear as block devices in U-Boot and can support + filesystems such as EXT4 and FAT.
config SPL_DM_MMC bool "Enable MMC controllers using Driver Model in SPL" @@ -79,7 +79,7 @@ config MMC_SDHCI_ADMA_HELPERS
config MMC_SPI bool "Support for SPI-based MMC controller" - depends on DM_MMC && DM_SPI + depends on DM_SPI help This selects SPI-based MMC controllers. If you have an MMC controller on a SPI bus, say Y here. @@ -97,7 +97,6 @@ config MMC_SPI_CRC_ON
config ARM_PL180_MMCI bool "ARM AMBA Multimedia Card Interface and compatible support" - depends on DM_MMC help This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card Interface (PL180, PL181 and compatible) support. @@ -258,7 +257,6 @@ config MMC_DW
config MMC_DW_CORTINA bool "Cortina specific extensions for Synopsys DW Memory Card Interface" - depends on DM_MMC depends on MMC_DW help This selects support for Cortina SoC specific extensions to the @@ -285,7 +283,7 @@ config MMC_DW_K3
config MMC_DW_ROCKCHIP bool "Rockchip SD/MMC controller support" - depends on DM_MMC && OF_CONTROL + depends on OF_CONTROL depends on MMC_DW help This enables support for the Rockchip SD/MMM controller, which is @@ -306,7 +304,6 @@ config MMC_DW_SOCFPGA config MMC_DW_SNPS bool "Extensions for DW Memory Card Interface used in Synopsys ARC devboards" depends on MMC_DW - depends on DM_MMC depends on OF_CONTROL depends on CLK help @@ -317,13 +314,12 @@ config NEXELL_DWMMC bool "Nexell SD/MMC controller support" depends on ARCH_NEXELL depends on MMC_DW - depends on DM_MMC depends on PINCTRL_NEXELL default y
config MMC_MESON_GX bool "Meson GX EMMC controller support" - depends on DM_MMC && ARCH_MESON + depends on ARCH_MESON help Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
@@ -338,7 +334,7 @@ config MMC_MXC
config MMC_OWL bool "Actions OWL Multimedia Card Interface support" - depends on ARCH_OWL && DM_MMC + depends on ARCH_OWL help This selects the OWL SD/MMC host controller found on board based on Actions S700/S900 SoC. @@ -366,7 +362,6 @@ config MMC_PCI config MMC_OCTEONTX bool "Marvell Octeon Multimedia Card Interface support" depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2) - depends on DM_MMC select MMC_SUPPORTS_TUNING if ARCH_OCTEONTX2 help This selects the Octeon Multimedia card Interface. @@ -377,7 +372,7 @@ config MMC_OCTEONTX
config MVEBU_MMC bool "Kirkwood MMC controller support" - depends on DM_MMC && ARCH_KIRKWOOD + depends on ARCH_KIRKWOOD help Support for MMC host controller on Kirkwood SoCs. If you are on a Kirkwood architecture, say Y here. @@ -386,8 +381,7 @@ config MVEBU_MMC
config MMC_OMAP_HS bool "TI OMAP High Speed Multimedia Card Interface support" - select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR - select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR + select DM_REGULATOR_PBIAS if DM_REGULATOR help This selects the TI OMAP High Speed Multimedia card Interface. If you have an omap2plus board with a Multimedia Card slot, @@ -430,7 +424,6 @@ config SH_MMCIF config MMC_UNIPHIER bool "UniPhier SD/MMC Host Controller support" depends on ARCH_UNIPHIER - depends on DM_MMC depends on OF_CONTROL help This selects support for the Matsushita SD/MMC Host Controller on @@ -439,7 +432,6 @@ config MMC_UNIPHIER config RENESAS_SDHI bool "Renesas R-Car SD/MMC Host Controller support" depends on ARCH_RENESAS - depends on DM_MMC depends on OF_CONTROL select BOUNCE_BUFFER help @@ -449,7 +441,6 @@ config RENESAS_SDHI config MMC_BCM2835 bool "BCM2835 family custom SD/MMC Host Controller support" depends on ARCH_BCM283X - depends on DM_MMC depends on OF_CONTROL default y help @@ -469,7 +460,7 @@ config JZ47XX_MMC config MMC_SANDBOX bool "Sandbox MMC support" depends on SANDBOX - depends on DM_MMC && OF_CONTROL + depends on OF_CONTROL help This select a dummy sandbox MMC driver. At present this does nothing other than allow sandbox to be build with MMC support. This @@ -559,7 +550,6 @@ config FIXED_SDHCI_ALIGNED_BUFFER config MMC_SDHCI_ASPEED bool "Aspeed SDHCI controller" depends on ARCH_ASPEED - depends on DM_MMC depends on MMC_SDHCI select MISC help @@ -571,7 +561,7 @@ config MMC_SDHCI_ASPEED config MMC_SDHCI_ATMEL bool "Atmel SDHCI controller support" depends on ARCH_AT91 - depends on DM_MMC && ARCH_AT91 + depends on ARCH_AT91 depends on MMC_SDHCI help This enables support for the Atmel SDHCI controller, which supports @@ -606,7 +596,6 @@ config MMC_SDHCI_BCMSTB
config MMC_SDHCI_CADENCE bool "SDHCI support for the Cadence SD/SDIO/eMMC controller" - depends on DM_MMC depends on MMC_SDHCI depends on OF_CONTROL help @@ -618,7 +607,6 @@ config MMC_SDHCI_CADENCE
config MMC_SDHCI_CV1800B bool "SDHCI support for the CV1800B SD/SDIO/eMMC controller" - depends on DM_MMC depends on MMC_SDHCI depends on OF_CONTROL help @@ -633,7 +621,7 @@ config MMC_SDHCI_AM654 bool "SDHCI Controller on TI's Am654 devices" depends on ARCH_K3 depends on MMC_SDHCI - depends on DM_MMC && OF_CONTROL + depends on OF_CONTROL depends on REGMAP select MMC_SDHCI_IO_ACCESSORS help @@ -653,7 +641,6 @@ config MMC_SDHCI_IPROC
config MMC_SDHCI_F_SDH30 bool "SDHCI support for Fujitsu Semiconductor/Socionext F_SDH30" - depends on DM_MMC depends on MMC_SDHCI help This selects the Secure Digital Host Controller Interface (SDHCI) @@ -673,7 +660,6 @@ config MMC_SDHCI_KONA
config MMC_SDHCI_MSM bool "Qualcomm SDHCI controller" - depends on DM_MMC depends on MMC_SDHCI help Enables support for SDHCI 2.0 controller present on some Qualcomm @@ -685,7 +671,6 @@ config MMC_SDHCI_MV bool "SDHCI support on Marvell platform" depends on ARCH_MVEBU depends on MMC_SDHCI - depends on DM_MMC help This selects the Secure Digital Host Controller Interface on Marvell platform. @@ -697,7 +682,6 @@ config MMC_SDHCI_MV config MMC_SDHCI_NPCM bool "SDHCI support on Nuvoton NPCM device" depends on MMC_SDHCI - depends on DM_MMC help This selects the Secure Digital Host Controller Interface (SDHCI) on Nuvoton NPCM device. @@ -708,7 +692,7 @@ config MMC_SDHCI_NPCM
config MMC_SDHCI_PIC32 bool "Microchip PIC32 on-chip SDHCI support" - depends on DM_MMC && MACH_PIC32 + depends on MACH_PIC32 depends on MMC_SDHCI help Support for Microchip PIC32 SDHCI controller. @@ -716,7 +700,6 @@ config MMC_SDHCI_PIC32 config MMC_SDHCI_ROCKCHIP bool "Arasan SDHCI controller for Rockchip support" depends on ARCH_ROCKCHIP - depends on DM_MMC depends on MMC_SDHCI help Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform @@ -735,7 +718,6 @@ config MMC_SDHCI_S5P config MMC_SDHCI_SNPS bool "Synopsys DesignWare SDHCI controller" depends on MMC_SDHCI - depends on DM_MMC help Support for DesignWare SDHCI host controller on Alibaba TH1520 SoC. This is a highly configurable and programmable, high performance @@ -753,7 +735,7 @@ config MMC_SDHCI_STI
config MMC_SDHCI_XENON bool "SDHCI support for the Xenon SDHCI controller" - depends on MMC_SDHCI && DM_MMC && OF_CONTROL + depends on MMC_SDHCI && OF_CONTROL help Support for Xenon SDHCI host controller on Marvell Armada 3700 7k/8k ARM SoCs platforms @@ -764,7 +746,6 @@ config MMC_SDHCI_XENON
config MMC_SDHCI_TANGIER bool "Tangier SDHCI controller support" - depends on DM_MMC depends on MMC_SDHCI help This selects support for SDHCI controller on Tanginer @@ -800,7 +781,7 @@ config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
config MMC_SDHCI_ZYNQ bool "Arasan SDHCI controller support" - depends on DM_MMC && OF_CONTROL + depends on OF_CONTROL depends on MMC_SDHCI help Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform @@ -842,7 +823,6 @@ config MMC_SUNXI_HAS_MODE_SWITCH
config MMC_PITON bool "MMC support for OpenPiton SoC" - depends on DM_MMC help This selects support for the SD host controller on OpenPiton SoC. Note that this SD controller directly exposes the contents of the @@ -851,7 +831,7 @@ config MMC_PITON
config GENERIC_ATMEL_MCI bool "Atmel Multimedia Card Interface support" - depends on DM_MMC && ARCH_AT91 + depends on ARCH_AT91 help This enables support for Atmel High Speed Multimedia Card Interface (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3, @@ -860,7 +840,7 @@ config GENERIC_ATMEL_MCI
config STM32_SDMMC2 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support" - depends on DM_MMC && OF_CONTROL + depends on OF_CONTROL help This selects support for the SD/MMC controller on STM32H7 SoCs. If you have a board based on such a SoC and with a SD/MMC slot, @@ -880,7 +860,6 @@ config FTSDC010_SDIO config MMC_MTK bool "MediaTek SD/MMC Card Interface support" depends on ARCH_MEDIATEK || ARCH_MTMIPS - depends on DM_MMC depends on OF_CONTROL help This selects the MediaTek(R) Secure digital and Multimedia card Interface. @@ -911,7 +890,7 @@ config FSL_ESDHC_SUPPORT_ADMA2
config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND bool "enable eSDHC workaround for 3.3v IO reliability issue" - depends on FSL_ESDHC && DM_MMC + depends on FSL_ESDHC help When eSDHC operates at 3.3v, damage can accumulate in an internal level shifter at a higher than expected rate. The faster the interface