Hi Bin,
Hi Rick,
On Mon, May 10, 2021 at 3:22 PM Rick Chen rickchen36@gmail.com wrote:
Hi Bin
Hi Bin,
From: Bin Meng bmeng.cn@gmail.com Sent: Monday, May 10, 2021 2:58 PM To: Simon Glass sjg@chromium.org; Rick Jian-Zhi Chen(陳建志) rick@andestech.com; u-boot@lists.denx.de Subject: [PATCH v4 00/13] riscv: Switch to use binman to generate u-boot.itb
This series updates binman to handle creation of u-boot.itb image for RISC-V boards.
Azure results: PASS https://dev.azure.com/bmeng/GitHub/_build/results?buildId=363&view=resul...
The following tests were performed:
- booting qemu-riscv{32|64}_spl_defconfig on QEMU virt
- booting sifive_unleashed_defconfig on QEMU sifive_u
AE350 SPL defconfigs are not tested. @Rick, could you please test and report?
OK. I will verify it on AE350.
It fail as below messages:
U-Boot SPL 2021.07-rc1-00218-g468b3b3 (May 10 2021 - 15:13:03 +0800) Trying to boot from RAM alloc space exhausted
Looks it is running out of memory.
Could not get FIT buffer of 499076 bytes check CONFIG_SYS_SPL_MALLOC_SIZE
Could you please try increasing CONFIG_SYS_SPL_MALLOC_SIZE?
I increased CONFIG_SYS_SPL_MALLOC_SIZE, but it is useless. But it boots successfully after increase CONFIG_SPL_SYS_MALLOC_F_LEN larger.
Thanks, Rick
No device tree specified in SPL image ### ERROR ### Please RESET the board ###
Any comments ?
Regards, Bin