Hi, Iwamatsu-san Hello, Heiko
Iwamatu-san, thank you for review. This is v3 patch for sh_i2c. Changes for v3: - call i2c_finish before returning i2c_probe, i2c_read, i2c_write even if error occured. Without this, it fails to boot Linux kernel after using "i2c probe" command. - use setbits/clrbits macro as Iwamatsu-san pointed.
Please check patch 5,6 and 10. The rest is not changed.
This patch set is based on arm/rmobile branch of u-boot-sh.git.
Tetsuyuki Kobayashi (10): i2c: sh_i2c.c: support iccl and icch extension i2c: sh_i2c.c: correct BUSY bit define in ICSR i2c: sh_i2c.c: adjust for SH73A0 i2c: sh_i2c.c: support I2C2, I2C3 and I2C4 i2c: sh_i2c: enable i2c_probe i2c: sh_i2c.c: check error in i2c_read and i2c_write i2c: sh_i2c.c: remove unused function arm: rmobile: kzm9g: enable I2C1 arm: rmobile: kzm9g: enable I2C2 i2c: sh_i2c: use setbits/clrbits macro
board/kmc/kzm9g/kzm9g.c | 7 ++- drivers/i2c/sh_i2c.c | 139 ++++++++++++++++++++++++++++++++--------------- include/configs/kzm9g.h | 8 ++- 3 files changed, 107 insertions(+), 47 deletions(-)