On 21.07.20 01:23, Jaehoon Chung wrote:
On 7/20/20 10:21 AM, Peng Fan wrote:
Hi Jan,
Subject: am654_sdhci: mmc fail to send stop cmd
Hi all,
on one device with one specific SD-card (possibly an aging one), I'm seeing frequent "mmc fail to send stop cmd" messages, followed by read errors when loading kernel and dtb. -ETIMEDOUT is returned by mmd_send_cmd. However, I can always resolve this by simply retrying the stop command like this:
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index f36d11ddc8..9019d9f2ed 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -406,7 +406,11 @@ static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start, #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) pr_err("mmc fail to send stop cmd\n"); #endif
return 0;
pr_err("retrying...\n");if (mmc_send_cmd(mmc, &cmd, NULL)) {pr_err("failed again\n");return 0;}Hardware is our IOT2050, baseline is today's master (1c4b5038afcc) with board-enabling and a bunch of patches from your tree [1]. However, already 4d6da10ce611 exposes the problem.
What could cause this?
Where the timeout happen in driver?
Did you try enlarge the timeout value?
how about adding SDHCI_QUIRK_WAIT_SEND_CMD?
I tried that already, but the result was even worse, a non-working mmc.
And as Peng's comment, It needs to find where return error in driver code.
As written in my other reply: https://gitlab.denx.de/u-boot/u-boot/-/blob/f12341a9529540113f01989149bbbeb6... Thus, it's reported by the hw.
Thanks, Jan