Successful in use w/ 'tio' serial tool and Adafruit CP2102N Friend adapter on Mars CM Lite board in DFRobot mini router carrier.
While SPL and u-boot.itb payload are sourced via UART the environment variables are from the environment variable storage as-is. This makes sense in the use case for development but may have side-effects in the case of U-Boot as a JH7110 recovery tool. There is now 'env default -f -a' which does not purge non-default variables and retains the non-default variables when migrating from vendor firmware. Consider to also build for U-Boot the commands that can aid in cleaning the stored environment variable state CONFIG_CMD_ERASEENV=y and in-memory state CONFIG_CMD_NVEDIT_LOAD=y. With these it can be done easily with: 'env erase; env load; env save'.
On Mon, Apr 15, 2024 at 4:51 AM Heinrich Schuchardt heinrich.schuchardt@canonical.com wrote:
We can use U-Boot for recovering JH7110 based boards via UART if CONFIG_SPL_YMODEM_SUPPORT=y.
- Send u-boot-spl.normal.out via XMODEM.
- Send u-boot.itb via YMODEM.
Signed-off-by: Heinrich Schuchardt heinrich.schuchardt@canonical.com
configs/starfive_visionfive2_defconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig index fa80d489f5e..e2d83c62b28 100644 --- a/configs/starfive_visionfive2_defconfig +++ b/configs/starfive_visionfive2_defconfig @@ -62,6 +62,7 @@ CONFIG_SPL_I2C=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_DM_RESET=y CONFIG_SPL_SPI_LOAD=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_SYS_PROMPT="StarFive # " CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_SIZE=512 -- 2.43.0
Tested-by: E Shattow lucent@gmail.com