Keystone and OMAP platforms will need this to set ethernet MAC addresses from board EEPROM.
Signed-off-by: Roger Quadros rogerq@ti.com Reviewed-by: Lokesh Vutla lokeshvutla@ti.com Reviewed-by: Tom Rini trini@konsulko.com --- board/ti/common/board_detect.c | 57 ++++++++++++++++++++++++++++++++++++++++++ board/ti/common/board_detect.h | 12 +++++++++ 2 files changed, 69 insertions(+)
diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c index a5dba94..23388d0 100644 --- a/board/ti/common/board_detect.c +++ b/board/ti/common/board_detect.c @@ -314,3 +314,60 @@ void __maybe_unused set_board_info_env(char *name) else setenv("board_serial", unknown); } + +static u64 mac_to_u64(u8 mac[6]) +{ + int i; + u64 addr = 0; + + for (i = 0; i < 6; i++) { + addr <<= 8; + addr |= mac[i]; + } + + return addr; +} + +static void u64_to_mac(u64 addr, u8 mac[6]) +{ + mac[5] = addr; + mac[4] = addr >> 8; + mac[3] = addr >> 16; + mac[2] = addr >> 24; + mac[1] = addr >> 32; + mac[0] = addr >> 40; +} + +void board_ti_set_ethaddr(int index) +{ + uint8_t mac_addr[6]; + int i; + u64 mac1, mac2; + u8 mac_addr1[6], mac_addr2[6]; + int num_macs; + /* + * Export any Ethernet MAC addresses from EEPROM. + * The 2 MAC addresses in EEPROM define the address range. + */ + board_ti_get_eth_mac_addr(0, mac_addr1); + board_ti_get_eth_mac_addr(1, mac_addr2); + + if (is_valid_ethaddr(mac_addr1) && is_valid_ethaddr(mac_addr2)) { + mac1 = mac_to_u64(mac_addr1); + mac2 = mac_to_u64(mac_addr2); + + /* must contain an address range */ + num_macs = mac2 - mac1 + 1; + /* <= 50 to protect against user programming error */ + if (num_macs > 0 && num_macs <= 50) { + for (i = 0; i < num_macs; i++) { + u64_to_mac(mac1 + i, mac_addr); + if (is_valid_ethaddr(mac_addr)) { + eth_setenv_enetaddr_by_index("eth", + i + index, + mac_addr); + } + } + } + } +} diff --git a/board/ti/common/board_detect.h b/board/ti/common/board_detect.h index 343fcb4..4bcb64f 100644 --- a/board/ti/common/board_detect.h +++ b/board/ti/common/board_detect.h @@ -193,4 +193,16 @@ u64 board_ti_get_emif2_size(void); */ void set_board_info_env(char *name);
+/** + * board_ti_set_ethaddr- Sets the ethaddr environment from EEPROM + * @index: The first eth<index>addr environment variable to set + * + * EEPROM should be already read before calling this function. + * The EEPROM contains 2 MAC addresses which define the MAC address + * range (i.e. first and last MAC address). + * This function sets the ethaddr environment variable for all + * the available MAC addresses starting from eth<index>addr. + */ +void board_ti_set_ethaddr(int index); + #endif /* __BOARD_DETECT_H */