3 Apr
2022
3 Apr
'22
2:17 a.m.
On Tue, Mar 22, 2022 at 05:16:05PM -0400, Sean Anderson wrote:
This adds support for booting entirely from JTAG while using a hard-coded RCW. With these steps, it is not necessary to program a "good" RCW using CodeWarrior. The method here can be performed with any JTAG adapter supported by OpenOCD, including the on-board CMSIS-DAP (albeit very slowly).
These steps require LS1046A support in OpenOCD, which was added in [1].
[1] https://sourceforge.net/p/openocd/code/ci/5b70c1f679755677c925b4e6dd2c3d8be4...
Signed-off-by: Sean Anderson sean.anderson@seco.com
Applied to u-boot/next, thanks!
--
Tom