From: Peng Fan peng.fan@nxp.com
Use spl_early_init to replace spl_init, spl_init will be invoked in board_init_r, we only need use spl_early_init to setup malloc and scan early dt.
Signed-off-by: Peng Fan peng.fan@nxp.com Signed-off-by: Fabio Estevam festevam@gmail.com --- Changes since v2: - None. Rebased against U-Boot master
board/freescale/imx8mp_evk/spl.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/board/freescale/imx8mp_evk/spl.c b/board/freescale/imx8mp_evk/spl.c index 3b3112077a..6fc3df5aee 100644 --- a/board/freescale/imx8mp_evk/spl.c +++ b/board/freescale/imx8mp_evk/spl.c @@ -118,17 +118,17 @@ void board_init_f(ulong dummy)
board_early_init_f();
- preloader_console_init(); - - /* Clear the BSS. */ - memset(__bss_start, 0, __bss_end - __bss_start); - - ret = spl_init(); + ret = spl_early_init(); if (ret) { debug("spl_init() failed: %d\n", ret); hang(); }
+ preloader_console_init(); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + enable_tzc380();
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);