Runtime U-boot dtb selection is generally a two step process. First step is to simply use an initial generic dtb. The second step is to select the dtb and perhaps execute additional code ones U-boot knows what board it is running on. Embedded_dtb_select handles the second step by allowing board specific code to run and perform what ever necessary configuration that is needed.
Signed-off-by: Franklin S Cooper Jr fcooper@ti.com Reviewed-by: Tom Rini trini@konsulko.com --- common/Kconfig | 9 +++++++++ common/board_f.c | 3 +++ include/common.h | 4 ++++ 3 files changed, 16 insertions(+)
diff --git a/common/Kconfig b/common/Kconfig index 0f9ba17..c58f807 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -437,6 +437,15 @@ config SYS_STDIO_DEREGISTER
endmenu
+config DTB_RESELECT + bool "Support swapping dtbs at a later point in boot" + depends on FIT_EMBED + help + It is possible during initial boot you may need to use a generic + dtb until you can fully determine the board your running on. This + config allows boards to implement a function at a later point + during boot to switch to the "correct" dtb. + config FIT_EMBED bool "Support a FIT image embedded in the U-boot image" help diff --git a/common/board_f.c b/common/board_f.c index 8bf9acc..6d51b51 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -816,6 +816,9 @@ static const init_fnc_t init_sequence_f[] = { #if defined(CONFIG_DISPLAY_CPUINFO) print_cpuinfo, /* display cpu info (and speed) */ #endif +#if defined(CONFIG_DTB_RESELECT) + embedded_dtb_select, +#endif #if defined(CONFIG_DISPLAY_BOARDINFO) show_board_info, #endif diff --git a/include/common.h b/include/common.h index 638c45b..739ae45 100644 --- a/include/common.h +++ b/include/common.h @@ -359,6 +359,10 @@ int get_env_id (void); void pci_init (void); void pci_init_board(void);
+#if defined(CONFIG_DTB_RESELECT) +int embedded_dtb_select(void); +#endif + int misc_init_f (void); int misc_init_r (void);