Hi Apurva!
On November 30, 2023 thus sayeth Apurva Nandan:
memory node is used by fdtdec_setup_mem_size_base() and fdtdec_setup_memory_banksize() during dram_init(), so use bootph-all to enable for all stages.
Signed-off-by: Apurva Nandan a-nandan@ti.com
arch/arm/dts/k3-am69-sk.dts | 1 + arch/arm/dts/k3-j784s4-evm.dts | 1 + 2 files changed, 2 insertions(+)
diff --git a/arch/arm/dts/k3-am69-sk.dts b/arch/arm/dts/k3-am69-sk.dts index 9868c7049b..2d6e51001b 100644 --- a/arch/arm/dts/k3-am69-sk.dts +++ b/arch/arm/dts/k3-am69-sk.dts @@ -36,6 +36,7 @@ /* 32G RAM */ reg = <0x00 0x80000000 0x00 0x80000000>, <0x08 0x80000000 0x07 0x80000000>;
bootph-all;};
reserved_memory: reserved-memory {
diff --git a/arch/arm/dts/k3-j784s4-evm.dts b/arch/arm/dts/k3-j784s4-evm.dts index f1f4c8634a..c33eba5fec 100644 --- a/arch/arm/dts/k3-j784s4-evm.dts +++ b/arch/arm/dts/k3-j784s4-evm.dts @@ -34,6 +34,7 @@ /* 32G RAM */ reg = <0x00 0x80000000 0x00 0x80000000>, <0x08 0x80000000 0x07 0x80000000>;
bootph-all;
These edits to the board files should go into *-u-boot.dtsi It would make them much easier to track for the next dt sync :)
~Bryan