
On 4/28/19 11:45 PM, Adam Ford wrote:
This patch reuses some former code for the hawkboard, combines it with some some similar DM_USB compatible code for the OHCI driver, and enables the use of the da850's OHCI controller with DM_USB compatibility.
Signed-off-by: Adam Ford aford173@gmail.com
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 0fbc115801..0d8ab3b651 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -239,6 +239,11 @@ config USB_OHCI_GENERIC ---help--- Enables support for generic OHCI controller.
+config USB_OHCI_DA8XX
- bool "Support for da850 OHCI USB controller"
- help
Enable support for the da850 USB controller.
endif # USB_OHCI_HCD
config USB_UHCI_HCD diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 47ad3f34d5..0f38791973 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -4,9 +4,63 @@ */
#include <common.h>
+#include <asm/io.h> +#include <clk.h> +#include <dm.h> +#include <dm/ofnode.h> +#include <generic-phy.h> +#include <reset.h> +#include "ohci.h" #include <asm/arch/da8xx-usb.h>
+struct da8xx_ohci {
- ohci_t ohci;
- struct clk *clocks; /* clock list */
- struct phy phy;
- int clock_count; /* number of clock in clock list */
+};
+static int usb_phy_on(void) +{
- u32 timeout;
- u32 cfgchip2;
- cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
- cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN |
CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ |
CFGCHIP2_USB1PHYCLKMUX);
- cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN | CFGCHIP2_PHY_PLLON |
CFGCHIP2_REFFREQ_24MHZ | CFGCHIP2_USB2PHYCLKMUX |
CFGCHIP2_USB1SUSPENDM;
- writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
- /* wait until the usb phy pll locks */
- timeout = 0x7FFFFFF;
- while (timeout--) {
Use get_timer() for the timeout.
if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD)
return 1;
- }
- /* USB phy was not turned on */
- return 0;
+}
+static void usb_phy_off(void) +{
- u32 cfgchip2;
- /*
* Power down the on-chip PHY.
*/
- cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
- cfgchip2 &= ~(CFGCHIP2_PHY_PLLON | CFGCHIP2_USB1SUSPENDM);
- cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN | CFGCHIP2_RESET;
- writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
clrsetbits
+}
int usb_cpu_init(void) { /* enable psc for usb2.0 */ @@ -37,3 +91,94 @@ int usb_cpu_init_fail(void) { return usb_cpu_stop(); }
+#if CONFIG_IS_ENABLED(DM_USB) +static int ohci_da8xx_probe(struct udevice *dev) +{
- struct ohci_regs *regs = (struct ohci_regs *)devfdt_get_addr(dev);
- struct da8xx_ohci *priv = dev_get_priv(dev);
- int i, err, ret, clock_nb;
- err = 0;
- priv->clock_count = 0;
- clock_nb = dev_count_phandle_with_args(dev, "clocks", "#clock-cells");
- if (clock_nb > 0) {
priv->clocks = devm_kcalloc(dev, clock_nb, sizeof(struct clk),
GFP_KERNEL);
if (!priv->clocks)
return -ENOMEM;
clk_enable_bulk()
for (i = 0; i < clock_nb; i++) {
err = clk_get_by_index(dev, i, &priv->clocks[i]);
if (err < 0)
break;
err = clk_enable(&priv->clocks[i]);
if (err) {
dev_err(dev, "failed to enable clock %d\n", i);
clk_free(&priv->clocks[i]);
goto clk_err;
}
priv->clock_count++;
}
- } else if (clock_nb != -ENOENT) {
dev_err(dev, "failed to get clock phandle(%d)\n", clock_nb);
return clock_nb;
- }
- err = usb_cpu_init();
- if (err)
goto clk_err;
- err = ohci_register(dev, regs);
- if (err)
goto phy_err;
- return 0;
+phy_err:
- ret = usb_cpu_stop();
- if (ret)
dev_err(dev, "failed to shutdown usb phy\n");
+clk_err:
- ret = clk_release_all(priv->clocks, priv->clock_count);
- if (ret)
dev_err(dev, "failed to disable all clocks\n");
- return err;
+}
+static int ohci_da8xx_remove(struct udevice *dev) +{
- struct da8xx_ohci *priv = dev_get_priv(dev);
- int ret;
- ret = ohci_deregister(dev);
- if (ret)
return ret;
- ret = usb_cpu_stop();
- if (ret)
return ret;
- return clk_release_all(priv->clocks, priv->clock_count);
+}
+static const struct udevice_id da8xx_ohci_ids[] = {
- { .compatible = "ti,da830-ohci" },
- { }
+};
+U_BOOT_DRIVER(ohci_generic) = {
- .name = "ohci-da8xx",
- .id = UCLASS_USB,
- .of_match = da8xx_ohci_ids,
- .probe = ohci_da8xx_probe,
- .remove = ohci_da8xx_remove,
- .ops = &ohci_usb_ops,
- .priv_auto_alloc_size = sizeof(struct da8xx_ohci),
- .flags = DM_FLAG_ALLOC_PRIV_DMA,
+}; +#endif