Re: [U-Boot-Users] [PATCH 3/7] sbc8560: define eth0 and eth1 instead of eth1 and eth2

Wolfgang Denk wrote:

...

• • MAC addresses directly on it.
• */

+#if 0 +#define CONFIG_ETHADDR 00:01:af:07:9b:8a +#define CONFIG_ETH1ADDR 00:01:af:07:9b:8b #define CONFIG_SERVERIP 192.168.0.131 #define CONFIG_IPADDR 192.168.0.105 -#define CONFIG_GATEWAYIP 0.0.0.0 +#define CONFIG_GATEWAYIP 192.168.0.1 #define CONFIG_NETMASK 255.255.255.0 +#endif

I think this should be removed. There is really no good reason to add network configuration at all to the board config file (with the exception of the 2 or 3 boards which actually boot from real ROM).

No problem. I'll remove and resend.

Thanks, Paul.

Best regards,

Wolfgang Denk