Signed-off-by: Sumit Garg sumit.garg@linaro.org --- drivers/phy/Kconfig | 15 +-------------- drivers/phy/Makefile | 3 +-- drivers/phy/qcom/Kconfig | 13 +++++++++++++ drivers/phy/qcom/Makefile | 2 ++ drivers/phy/{ => qcom}/msm8916-usbh-phy.c | 0 drivers/phy/{ => qcom}/phy-qcom-ipq4019-usb.c | 0 6 files changed, 17 insertions(+), 16 deletions(-) create mode 100644 drivers/phy/qcom/Kconfig create mode 100644 drivers/phy/qcom/Makefile rename drivers/phy/{ => qcom}/msm8916-usbh-phy.c (100%) rename drivers/phy/{ => qcom}/phy-qcom-ipq4019-usb.c (100%)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index c25b42c68f..cf4d5908d7 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -143,12 +143,6 @@ config STI_USB_PHY used by USB2 and USB3 Host controllers available on STiH407 SoC families.
-config PHY_QCOM_IPQ4019_USB - tristate "Qualcomm IPQ4019 USB PHY driver" - depends on PHY && ARCH_IPQ40XX - help - Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. - config PHY_RCAR_GEN2 tristate "Renesas R-Car Gen2 USB PHY" depends on PHY && RCAR_GEN2 @@ -220,14 +214,6 @@ config MESON_AXG_MIPI_PCIE_ANALOG_PHY This is the generic phy driver for the Amlogic Meson AXG MIPI PCIe Analog PHY.
-config MSM8916_USB_PHY - bool "Qualcomm MSM8916 USB PHY support" - depends on PHY - help - Support the USB PHY in msm8916 - - This PHY is found on qualcomm dragonboard410c development board. - config OMAP_USB2_PHY bool "Support OMAP's USB2 PHY" depends on PHY @@ -298,5 +284,6 @@ config PHY_XILINX_ZYNQMP source "drivers/phy/rockchip/Kconfig" source "drivers/phy/cadence/Kconfig" source "drivers/phy/ti/Kconfig" +source "drivers/phy/qcom/Kconfig"
endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index d95439c425..a3b9f3c5b1 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -21,7 +21,6 @@ obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o obj-$(CONFIG_AM654_PHY) += phy-ti-am654.o obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o -obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o obj-$(CONFIG_PHY_RCAR_GEN3) += phy-rcar-gen3.o obj-$(CONFIG_PHY_STM32_USBPHYC) += phy-stm32-usbphyc.o @@ -30,7 +29,6 @@ obj-$(CONFIG_MESON_GXL_USB_PHY) += meson-gxl-usb2.o obj-$(CONFIG_MESON_G12A_USB_PHY) += meson-g12a-usb2.o meson-g12a-usb3-pcie.o obj-$(CONFIG_MESON_AXG_MIPI_DPHY) += meson-axg-mipi-dphy.o obj-$(CONFIG_MESON_AXG_MIPI_PCIE_ANALOG_PHY) += meson-axg-mipi-pcie-analog.o -obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o obj-$(CONFIG_OMAP_USB2_PHY) += omap-usb2-phy.o obj-$(CONFIG_KEYSTONE_USB_PHY) += keystone-usb-phy.o obj-$(CONFIG_MT7620_USB_PHY) += mt7620-usb-phy.o @@ -42,3 +40,4 @@ obj-$(CONFIG_PHY_IMX8MQ_USB) += phy-imx8mq-usb.o obj-$(CONFIG_PHY_XILINX_ZYNQMP) += phy-zynqmp.o obj-y += cadence/ obj-y += ti/ +obj-y += qcom/ diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig new file mode 100644 index 0000000000..f685a6455e --- /dev/null +++ b/drivers/phy/qcom/Kconfig @@ -0,0 +1,13 @@ +config MSM8916_USB_PHY + bool "Qualcomm MSM8916 USB PHY support" + depends on PHY + help + Support the USB PHY in msm8916 + + This PHY is found on qualcomm dragonboard410c development board. + +config PHY_QCOM_IPQ4019_USB + tristate "Qualcomm IPQ4019 USB PHY driver" + depends on PHY && ARCH_IPQ40XX + help + Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile new file mode 100644 index 0000000000..4a340e33c8 --- /dev/null +++ b/drivers/phy/qcom/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o +obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o diff --git a/drivers/phy/msm8916-usbh-phy.c b/drivers/phy/qcom/msm8916-usbh-phy.c similarity index 100% rename from drivers/phy/msm8916-usbh-phy.c rename to drivers/phy/qcom/msm8916-usbh-phy.c diff --git a/drivers/phy/phy-qcom-ipq4019-usb.c b/drivers/phy/qcom/phy-qcom-ipq4019-usb.c similarity index 100% rename from drivers/phy/phy-qcom-ipq4019-usb.c rename to drivers/phy/qcom/phy-qcom-ipq4019-usb.c