-----Original Message----- From: Zhiqiang Hou [mailto:Zhiqiang.Hou@nxp.com] Sent: Monday, September 12, 2016 9:39 AM To: u-boot@lists.denx.de; albert.u.boot@aribaud.net; york sun york.sun@nxp.com; Vincent Hu mingkai.hu@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com; Calvin Johnson calvin.johnson@nxp.com Cc: Z.Q. Hou zhiqiang.hou@nxp.com Subject: [PATCH 2/2] armv8/fsl-lsch3: consolidate the clock system initialization
From: Hou Zhiqiang Zhiqiang.Hou@nxp.com
This patch map the sys_info->freq_systembus to Platform PLL, and implement the IPs' clock function individually.
Signed-off-by: Hou Zhiqiang Zhiqiang.Hou@nxp.com
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c | 26 +++++++++++++++++--
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 1 + include/configs/ls2080a_common.h | 2 +- 3 files changed, 22 insertions(+), 7 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c index a9b12a4..daad80a 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c @@ -88,11 +88,10 @@ void get_sys_info(struct sys_info *sys_info) #endif #endif
- /* The freq_systembus is used to record frequency of platform PLL */ sys_info->freq_systembus *= (gur_in32(&gur->rcwsr[0]) >> FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_SHIFT) & FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_MASK;
- /* Platform clock is half of platform PLL */
- sys_info->freq_systembus /= 2;
This is required only for ls2080A and ls2088A otherwise u-boot will be printing dicken speed in boot log.
sys_info->freq_ddrbus *= (gur_in32(&gur->rcwsr[0]) >> FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) & FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK; @@ -132,7 +131,7 @@ void get_sys_info(struct sys_info *sys_info) ccr = ifc_in32(&ifc_regs.gregs->ifc_ccr); ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
- sys_info->freq_localbus = sys_info->freq_systembus / ccr;
- sys_info->freq_localbus = sys_info->freq_systembus / 2 / ccr;
#endif }
@@ -159,7 +158,7 @@ int get_clocks(void)
/********************************************
- get_bus_freq
- return system bus freq in Hz
*********************************************/
- return platform PLL freq in Hz
ulong get_bus_freq(ulong dummy) { @@ -190,13 +189,28 @@ ulong get_ddr_freq(ulong ctrl_num) return gd->mem_clk; }
+int get_i2c_freq(ulong dummy) +{
- return get_bus_freq(0) / 4;
+}
+int get_dspi_freq(ulong dummy) +{
- return get_bus_freq(0) / 4;
+}
+int get_serial_clock(void) +{
- return get_bus_freq(0) / 4;
+}
get_bus_freq(0) / 4 --> May not be true for LS1088A. So Avoid this for above code.
--prabhakar