The controller has 3 ports. The port0 is for USB 2.0 Phy, port1 and port2 are for HSIC phys. The usb 2.0 phy is already being setup. This patch sets up the hsic phys.
Signed-off-by: Inderpal Singh inderpal.singh@linaro.org --- arch/arm/include/asm/arch-exynos/ehci.h | 14 +++++++++++ drivers/usb/host/ehci-exynos.c | 39 +++++++++++++++++++++++++++++++ 2 files changed, 53 insertions(+)
diff --git a/arch/arm/include/asm/arch-exynos/ehci.h b/arch/arm/include/asm/arch-exynos/ehci.h index d79f25c..d2d70bd 100644 --- a/arch/arm/include/asm/arch-exynos/ehci.h +++ b/arch/arm/include/asm/arch-exynos/ehci.h @@ -29,6 +29,20 @@ #define EHCICTRL_ENAINCR8 (1 << 27) #define EHCICTRL_ENAINCR16 (1 << 26)
+#define HSIC_CTRL_REFCLKSEL (0x2) +#define HSIC_CTRL_REFCLKSEL_MASK (0x3) +#define HSIC_CTRL_REFCLKSEL_SHIFT (23) + +#define HSIC_CTRL_REFCLKDIV_12 (0x24) +#define HSIC_CTRL_REFCLKDIV_MASK (0x7f) +#define HSIC_CTRL_REFCLKDIV_SHIFT (16) + +#define HSIC_CTRL_SIDDQ (0x1 << 6) +#define HSIC_CTRL_FORCESLEEP (0x1 << 5) +#define HSIC_CTRL_FORCESUSPEND (0x1 << 4) +#define HSIC_CTRL_UTMISWRST (0x1 << 2) +#define HSIC_CTRL_PHYSWRST (0x1 << 0) + /* Register map for PHY control */ struct exynos_usb_phy { unsigned int usbphyctrl0; diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 155677e..50fbf36 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -83,6 +83,8 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos) /* Setup the EHCI host controller. */ static void setup_usb_phy(struct exynos_usb_phy *usb) { + u32 hsic_ctrl; + set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN); @@ -107,6 +109,32 @@ static void setup_usb_phy(struct exynos_usb_phy *usb) clrbits_le32(&usb->usbphyctrl0, HOST_CTRL0_LINKSWRST | HOST_CTRL0_UTMISWRST); + + /* HSIC Phy Setting */ + hsic_ctrl = (HSIC_CTRL_FORCESUSPEND | + HSIC_CTRL_FORCESLEEP | + HSIC_CTRL_SIDDQ); + + clrbits_le32(&usb->hsicphyctrl1, hsic_ctrl); + clrbits_le32(&usb->hsicphyctrl2, hsic_ctrl); + + hsic_ctrl = (((HSIC_CTRL_REFCLKDIV_12 & HSIC_CTRL_REFCLKDIV_MASK) + << HSIC_CTRL_REFCLKDIV_SHIFT) + | ((HSIC_CTRL_REFCLKSEL & HSIC_CTRL_REFCLKSEL_MASK) + << HSIC_CTRL_REFCLKSEL_SHIFT) + | HSIC_CTRL_UTMISWRST); + + setbits_le32(&usb->hsicphyctrl1, hsic_ctrl); + setbits_le32(&usb->hsicphyctrl2, hsic_ctrl); + + udelay(10); + + clrbits_le32(&usb->hsicphyctrl1, HSIC_CTRL_PHYSWRST | + HSIC_CTRL_UTMISWRST); + + clrbits_le32(&usb->hsicphyctrl2, HSIC_CTRL_PHYSWRST | + HSIC_CTRL_UTMISWRST); + udelay(20);
/* EHCI Ctrl setting */ @@ -120,6 +148,8 @@ static void setup_usb_phy(struct exynos_usb_phy *usb) /* Reset the EHCI host controller. */ static void reset_usb_phy(struct exynos_usb_phy *usb) { + u32 hsic_ctrl; + /* HOST_PHY reset */ setbits_le32(&usb->usbphyctrl0, HOST_CTRL0_PHYSWRST | @@ -128,6 +158,15 @@ static void reset_usb_phy(struct exynos_usb_phy *usb) HOST_CTRL0_FORCESUSPEND | HOST_CTRL0_FORCESLEEP);
+ /* HSIC Phy reset */ + hsic_ctrl = (HSIC_CTRL_FORCESUSPEND | + HSIC_CTRL_FORCESLEEP | + HSIC_CTRL_SIDDQ | + HSIC_CTRL_PHYSWRST); + + setbits_le32(&usb->hsicphyctrl1, hsic_ctrl); + setbits_le32(&usb->hsicphyctrl2, hsic_ctrl); + set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE); }