This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---
arch/powerpc/cpu/mpc86xx/Kconfig | 4 - board/sbc8641d/Kconfig | 9 - board/sbc8641d/MAINTAINERS | 6 - board/sbc8641d/Makefile | 10 - board/sbc8641d/README | 28 -- board/sbc8641d/ddr.c | 56 ---- board/sbc8641d/law.c | 40 --- board/sbc8641d/sbc8641d.c | 261 ----------------- configs/sbc8641d_defconfig | 4 - include/configs/sbc8641d.h | 590 --------------------------------------- 10 files changed, 1008 deletions(-) delete mode 100644 board/sbc8641d/Kconfig delete mode 100644 board/sbc8641d/MAINTAINERS delete mode 100644 board/sbc8641d/Makefile delete mode 100644 board/sbc8641d/README delete mode 100644 board/sbc8641d/ddr.c delete mode 100644 board/sbc8641d/law.c delete mode 100644 board/sbc8641d/sbc8641d.c delete mode 100644 configs/sbc8641d_defconfig delete mode 100644 include/configs/sbc8641d.h
diff --git a/arch/powerpc/cpu/mpc86xx/Kconfig b/arch/powerpc/cpu/mpc86xx/Kconfig index 46d15e2..0dcee70 100644 --- a/arch/powerpc/cpu/mpc86xx/Kconfig +++ b/arch/powerpc/cpu/mpc86xx/Kconfig @@ -8,9 +8,6 @@ choice prompt "Target select" optional
-config TARGET_SBC8641D - bool "Support sbc8641d" - config TARGET_MPC8641HPCN bool "Support MPC8641HPCN"
@@ -20,7 +17,6 @@ config TARGET_XPEDITE517X endchoice
source "board/freescale/mpc8641hpcn/Kconfig" -source "board/sbc8641d/Kconfig" source "board/xes/xpedite517x/Kconfig"
endmenu diff --git a/board/sbc8641d/Kconfig b/board/sbc8641d/Kconfig deleted file mode 100644 index 8dfc90c..0000000 --- a/board/sbc8641d/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_SBC8641D - -config SYS_BOARD - default "sbc8641d" - -config SYS_CONFIG_NAME - default "sbc8641d" - -endif diff --git a/board/sbc8641d/MAINTAINERS b/board/sbc8641d/MAINTAINERS deleted file mode 100644 index a50b541..0000000 --- a/board/sbc8641d/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SBC8641D BOARD -M: Paul Gortmaker paul.gortmaker@windriver.com -S: Maintained -F: board/sbc8641d/ -F: include/configs/sbc8641d.h -F: configs/sbc8641d_defconfig diff --git a/board/sbc8641d/Makefile b/board/sbc8641d/Makefile deleted file mode 100644 index a9b2026..0000000 --- a/board/sbc8641d/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += sbc8641d.o -obj-y += law.o -obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o diff --git a/board/sbc8641d/README b/board/sbc8641d/README deleted file mode 100644 index a051466..0000000 --- a/board/sbc8641d/README +++ /dev/null @@ -1,28 +0,0 @@ -Wind River SBC8641D reference board -=========================== - -Created 06/14/2007 Joe Hamman -Copyright 2007, Embedded Specialties, Inc. -Copyright 2007 Wind River Systemes, Inc. ------------------------------ - -1. Building U-Boot ------------------- -The SBC8641D code is known to build using ELDK 4.1. - - $ make sbc8641d_config - Configuring for sbc8641d board... - - $ make - - -2. Switch and Jumper Settings ------------------------------ -All Jumpers & Switches are in their default positions. Please refer to -the board documentation for details. Some settings control CPU voltages -and settings may change with board revisions. - -3. Known limitations --------------------- -PCI: - The PCI command may hang if no boards are present in either slot. diff --git a/board/sbc8641d/ddr.c b/board/sbc8641d/ddr.c deleted file mode 100644 index b31ea34..0000000 --- a/board/sbc8641d/ddr.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include <common.h> - -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - /* - * Factors to consider for clock adjust: - * - number of chips on bus - * - position of slot - * - DDR1 vs. DDR2? - * - ??? - * - * This needs to be determined on a board-by-board basis. - * 0110 3/4 cycle late - * 0111 7/8 cycle late - */ - popts->clk_adjust = 7; - - /* - * Factors to consider for CPO: - * - frequency - * - ddr1 vs. ddr2 - */ - popts->cpo_override = 10; - - /* - * Factors to consider for write data delay: - * - number of DIMMs - * - * 1 = 1/4 clock delay - * 2 = 1/2 clock delay - * 3 = 3/4 clock delay - * 4 = 1 clock delay - * 5 = 5/4 clock delay - * 6 = 3/2 clock delay - */ - popts->write_data_delay = 3; - - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; -} diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c deleted file mode 100644 index c4e736b..0000000 --- a/board/sbc8641d/law.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* - * LAW (Local Access Window) configuration: - * - * 0x0000_0000 DDR 256M - * 0x1000_0000 DDR2 256M - * 0x8000_0000 PCIE1 MEM 512M - * 0xa000_0000 PCIE2 MEM 512M - * 0xc000_0000 RapidIO 512M - * 0xe200_0000 PCIE1 IO 16M - * 0xe300_0000 PCIE2 IO 16M - * 0xf800_0000 CCSRBAR 2M - * 0xfe00_0000 FLASH (boot bank) 32M - * - */ - - -struct law_entry law_table[] = { -#if !defined(CONFIG_SPD_EEPROM) - SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1), - SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - LAW_SIZE_256M, LAW_TRGT_IF_DDR_2), -#endif - SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC), - SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c deleted file mode 100644 index 6bdf1a2..0000000 --- a/board/sbc8641d/sbc8641d.c +++ /dev/null @@ -1,261 +0,0 @@ -/* - * Copyright 2007 Wind River Systemes, Inc. <www.windriver.com> - * Copyright 2007 Embedded Specialties, Inc. - * Joe Hamman joe.hamman@embeddedspecialties.com - * - * Copyright 2004 Freescale Semiconductor. - * Jeff Brown - * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) - * - * (C) Copyright 2002 Scott McNutt smcnutt@artesyncp.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/immap_86xx.h> -#include <asm/fsl_pci.h> -#include <fsl_ddr_sdram.h> -#include <asm/fsl_serdes.h> -#include <libfdt.h> -#include <fdt_support.h> - -long int fixed_sdram (void); - -int board_early_init_f (void) -{ - return 0; -} - -int checkboard (void) -{ - puts ("Board: Wind River SBC8641D\n"); - - return 0; -} - -phys_size_t initdram (int board_type) -{ - long dram_size = 0; - -#if defined(CONFIG_SPD_EEPROM) - dram_size = fsl_ddr_sdram(); -#else - dram_size = fixed_sdram (); -#endif - - debug (" DDR: "); - return dram_size; -} - -#if defined(CONFIG_SYS_DRAM_TEST) -int testdram (void) -{ - uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; - uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; - uint *p; - - puts ("SDRAM test phase 1:\n"); - for (p = pstart; p < pend; p++) - *p = 0xaaaaaaaa; - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - puts ("SDRAM test phase 2:\n"); - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - puts ("SDRAM test passed.\n"); - return 0; -} -#endif - -#if !defined(CONFIG_SPD_EEPROM) -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ -long int fixed_sdram (void) -{ -#if !defined(CONFIG_SYS_RAMBOOT) - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile struct ccsr_ddr *ddr = &immap->im_ddr1; - - ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; - ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS; - ddr->cs2_bnds = CONFIG_SYS_DDR_CS2_BNDS; - ddr->cs3_bnds = CONFIG_SYS_DDR_CS3_BNDS; - ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; - ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG; - ddr->cs2_config = CONFIG_SYS_DDR_CS2_CONFIG; - ddr->cs3_config = CONFIG_SYS_DDR_CS3_CONFIG; - ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; - ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; - ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1A; - ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CFG_2; - ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; - ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; - ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTL; - ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; - ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; - ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; - - asm ("sync;isync"); - - udelay (500); - - ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1B; - asm ("sync; isync"); - - udelay (500); - ddr = &immap->im_ddr2; - - ddr->cs0_bnds = CONFIG_SYS_DDR2_CS0_BNDS; - ddr->cs1_bnds = CONFIG_SYS_DDR2_CS1_BNDS; - ddr->cs2_bnds = CONFIG_SYS_DDR2_CS2_BNDS; - ddr->cs3_bnds = CONFIG_SYS_DDR2_CS3_BNDS; - ddr->cs0_config = CONFIG_SYS_DDR2_CS0_CONFIG; - ddr->cs1_config = CONFIG_SYS_DDR2_CS1_CONFIG; - ddr->cs2_config = CONFIG_SYS_DDR2_CS2_CONFIG; - ddr->cs3_config = CONFIG_SYS_DDR2_CS3_CONFIG; - ddr->timing_cfg_3 = CONFIG_SYS_DDR2_EXT_REFRESH; - ddr->timing_cfg_0 = CONFIG_SYS_DDR2_TIMING_0; - ddr->timing_cfg_1 = CONFIG_SYS_DDR2_TIMING_1; - ddr->timing_cfg_2 = CONFIG_SYS_DDR2_TIMING_2; - ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1A; - ddr->sdram_cfg_2 = CONFIG_SYS_DDR2_CFG_2; - ddr->sdram_mode = CONFIG_SYS_DDR2_MODE_1; - ddr->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2; - ddr->sdram_md_cntl = CONFIG_SYS_DDR2_MODE_CTL; - ddr->sdram_interval = CONFIG_SYS_DDR2_INTERVAL; - ddr->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT; - ddr->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL; - - asm ("sync;isync"); - - udelay (500); - - ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1B; - asm ("sync; isync"); - - udelay (500); -#endif - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - -#if defined(CONFIG_PCI) -/* - * Initialize PCI Devices, report devices found. - */ - -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} -#endif /* CONFIG_PCI */ - - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - FT_FSL_PCI_SETUP; - - return 0; -} -#endif - -void sbc8641d_reset_board (void) -{ - puts ("Resetting board....\n"); -} - -/* - * get_board_sys_clk - * Clock is fixed at 1GHz on this board. Used for CONFIG_SYS_CLK_FREQ - */ - -unsigned long get_board_sys_clk (ulong dummy) -{ - int i; - ulong val = 0; - - i = 5; - i &= 0x07; - - switch (i) { - case 0: - val = 33000000; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66000000; - break; - case 4: - val = 83000000; - break; - case 5: - val = 100000000; - break; - case 6: - val = 134000000; - break; - case 7: - val = 166000000; - break; - } - - return val; -} - -void board_reset(void) -{ -#ifdef CONFIG_SYS_RESET_ADDRESS - ulong addr = CONFIG_SYS_RESET_ADDRESS; - - /* flush and disable I/D cache */ - __asm__ __volatile__ ("mfspr 3, 1008" ::: "r3"); - __asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5"); - __asm__ __volatile__ ("ori 4, 3, 0xc00" ::: "r4"); - __asm__ __volatile__ ("andc 5, 3, 5" ::: "r5"); - __asm__ __volatile__ ("sync"); - __asm__ __volatile__ ("mtspr 1008, 4"); - __asm__ __volatile__ ("isync"); - __asm__ __volatile__ ("sync"); - __asm__ __volatile__ ("mtspr 1008, 5"); - __asm__ __volatile__ ("isync"); - __asm__ __volatile__ ("sync"); - - /* - * SRR0 has system reset vector, SRR1 has default MSR value - * rfi restores MSR from SRR1 and sets the PC to the SRR0 value - */ - __asm__ __volatile__ ("mtspr 26, %0" :: "r" (addr)); - __asm__ __volatile__ ("li 4, (1 << 6)" ::: "r4"); - __asm__ __volatile__ ("mtspr 27, 4"); - __asm__ __volatile__ ("rfi"); -#endif -} diff --git a/configs/sbc8641d_defconfig b/configs/sbc8641d_defconfig deleted file mode 100644 index b67c7c0..0000000 --- a/configs/sbc8641d_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC86xx=y -CONFIG_TARGET_SBC8641D=y -# CONFIG_CMD_SETEXPR is not set diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h deleted file mode 100644 index 00aab6b..0000000 --- a/include/configs/sbc8641d.h +++ /dev/null @@ -1,590 +0,0 @@ -/* - * Copyright 2007 Wind River Systems <www.windriver.com> - * Copyright 2007 Embedded Specialties, Inc. - * Joe Hamman joe.hamman@embeddedspecialties.com - * - * Copyright 2006 Freescale Semiconductor. - * - * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * SBC8641D board configuration file - * - * Make sure you change the MAC address and other network params first, - * search for CONFIG_SERVERIP, etc in this file. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ -#define CONFIG_MPC8641 1 /* MPC8641 specific */ -#define CONFIG_SBC8641D 1 /* SBC8641D board specific */ -#define CONFIG_MP 1 /* support multiple processors */ -#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#ifdef RUN_DIAG -#define CONFIG_SYS_DIAG_ADDR 0xff800000 -#endif - -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 - -/* - * virtual address to be used for temporary mappings. There - * should be 128k free at this VA. - */ -#define CONFIG_SYS_SCRATCH_VA 0xe8000000 - -#define CONFIG_SYS_SRIO -#define CONFIG_SRIO1 /* SRIO port 1 */ - -#define CONFIG_PCI 1 /* Enable PCIE */ -#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ -#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ - -#undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup*/ -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#define CONFIG_NUM_DDR_CONTROLLERS 2 -#define CACHE_LINE_INTERLEAVING 0x20000000 -#define PAGE_INTERLEAVING 0x21000000 -#define BANK_INTERLEAVING 0x22000000 -#define SUPER_BANK_INTERLEAVING 0x23000000 - - -#define CONFIG_ALTIVEC 1 - -/* - * L2CR setup -- make sure this is right for your board! - */ -#define CONFIG_SYS_L2 -#define L2_INIT 0 -#define L2_ENABLE (L2CR_L2E) - -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) -#endif - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ - -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -/* - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - */ -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ -#define CONFIG_SYS_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ -#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ - -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 -#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW - -/* - * DDR Setup - */ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_DDR_SDRAM_BASE2 0x10000000 /* DDR bank 2 */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_SDRAM_BASE2 CONFIG_SYS_DDR_SDRAM_BASE2 -#define CONFIG_SYS_MAX_DDR_BAT_SIZE 0x80000000 /* BAT mapping size */ -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_NUM_DDR_CONTROLLERS 2 -#define CONFIG_DIMM_SLOTS_PER_CTLR 2 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) - -#if defined(CONFIG_SPD_EEPROM) - /* - * Determine DDR configuration from I2C interface. - */ - #define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */ - #define SPD_EEPROM_ADDRESS2 0x52 /* DDR DIMM */ - #define SPD_EEPROM_ADDRESS3 0x53 /* DDR DIMM */ - #define SPD_EEPROM_ADDRESS4 0x54 /* DDR DIMM */ - -#else - /* - * Manually set up DDR1 & DDR2 parameters - */ - - #define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */ - - #define CONFIG_SYS_DDR_CS0_BNDS 0x0000000F - #define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 - #define CONFIG_SYS_DDR_CS2_BNDS 0x00000000 - #define CONFIG_SYS_DDR_CS3_BNDS 0x00000000 - #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 - #define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000 - #define CONFIG_SYS_DDR_CS2_CONFIG 0x00000000 - #define CONFIG_SYS_DDR_CS3_CONFIG 0x00000000 - #define CONFIG_SYS_DDR_TIMING_3 0x00000000 - #define CONFIG_SYS_DDR_TIMING_0 0x00220802 - #define CONFIG_SYS_DDR_TIMING_1 0x38377322 - #define CONFIG_SYS_DDR_TIMING_2 0x002040c7 - #define CONFIG_SYS_DDR_CFG_1A 0x43008008 - #define CONFIG_SYS_DDR_CFG_2 0x24401000 - #define CONFIG_SYS_DDR_MODE_1 0x23c00542 - #define CONFIG_SYS_DDR_MODE_2 0x00000000 - #define CONFIG_SYS_DDR_MODE_CTL 0x00000000 - #define CONFIG_SYS_DDR_INTERVAL 0x05080100 - #define CONFIG_SYS_DDR_DATA_INIT 0x00000000 - #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 - #define CONFIG_SYS_DDR_CFG_1B 0xC3008008 - - #define CONFIG_SYS_DDR2_CS0_BNDS 0x0010001F - #define CONFIG_SYS_DDR2_CS1_BNDS 0x00000000 - #define CONFIG_SYS_DDR2_CS2_BNDS 0x00000000 - #define CONFIG_SYS_DDR2_CS3_BNDS 0x00000000 - #define CONFIG_SYS_DDR2_CS0_CONFIG 0x80010102 - #define CONFIG_SYS_DDR2_CS1_CONFIG 0x00000000 - #define CONFIG_SYS_DDR2_CS2_CONFIG 0x00000000 - #define CONFIG_SYS_DDR2_CS3_CONFIG 0x00000000 - #define CONFIG_SYS_DDR2_EXT_REFRESH 0x00000000 - #define CONFIG_SYS_DDR2_TIMING_0 0x00220802 - #define CONFIG_SYS_DDR2_TIMING_1 0x38377322 - #define CONFIG_SYS_DDR2_TIMING_2 0x002040c7 - #define CONFIG_SYS_DDR2_CFG_1A 0x43008008 - #define CONFIG_SYS_DDR2_CFG_2 0x24401000 - #define CONFIG_SYS_DDR2_MODE_1 0x23c00542 - #define CONFIG_SYS_DDR2_MODE_2 0x00000000 - #define CONFIG_SYS_DDR2_MODE_CTL 0x00000000 - #define CONFIG_SYS_DDR2_INTERVAL 0x05080100 - #define CONFIG_SYS_DDR2_DATA_INIT 0x00000000 - #define CONFIG_SYS_DDR2_CLK_CTRL 0x03800000 - #define CONFIG_SYS_DDR2_CFG_1B 0xC3008008 - - -#endif - -/* #define CONFIG_ID_EEPROM 1 -#define ID_EEPROM_ADDR 0x57 */ - -/* - * The SBC8641D contains 16MB flash space at ff000000. - */ -#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ - -/* Flash */ -#define CONFIG_SYS_BR0_PRELIM 0xff001001 /* port size 16bit */ -#define CONFIG_SYS_OR0_PRELIM 0xff006e65 /* 16MB Boot Flash area */ - -/* 64KB EEPROM */ -#define CONFIG_SYS_BR1_PRELIM 0xf0000801 /* port size 16bit */ -#define CONFIG_SYS_OR1_PRELIM 0xffff6e65 /* 64K EEPROM area */ - -/* EPLD - User switches, board id, LEDs */ -#define CONFIG_SYS_BR2_PRELIM 0xf1000801 /* port size 16bit */ -#define CONFIG_SYS_OR2_PRELIM 0xfff06e65 /* EPLD (switches, board ID, LEDs) area */ - -/* Local bus SDRAM 128MB */ -#define CONFIG_SYS_BR3_PRELIM 0xe0001861 /* port size ?bit */ -#define CONFIG_SYS_OR3_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (1st half) */ -#define CONFIG_SYS_BR4_PRELIM 0xe4001861 /* port size ?bit */ -#define CONFIG_SYS_OR4_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (2nd half) */ - -/* Disk on Chip (DOC) 128MB */ -#define CONFIG_SYS_BR5_PRELIM 0xe8001001 /* port size ?bit */ -#define CONFIG_SYS_OR5_PRELIM 0xf8006e65 /* 128MB local bus SDRAM area (2nd half) */ - -/* LCD */ -#define CONFIG_SYS_BR6_PRELIM 0xf4000801 /* port size ?bit */ -#define CONFIG_SYS_OR6_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */ - -/* Control logic & misc peripherals */ -#define CONFIG_SYS_BR7_PRELIM 0xf2000801 /* port size ?bit */ -#define CONFIG_SYS_OR7_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 131 /* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#define CONFIG_SYS_MONITOR_BASE_EARLY 0xfff00000 /* early monitor loc */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_WRITE_SWAPPED_DATA -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_PROTECTION - -#undef CONFIG_CLOCKS_IN_MHZ - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#ifndef CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ -#else -#define CONFIG_SYS_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */ -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ - -/* Serial Port */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#endif - -/* - * Pass open firmware flat tree to kernel - */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* - * I2C - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* - * RapidIO MMU - */ -#define CONFIG_SYS_SRIO1_MEM_BASE 0xc0000000 /* base address */ -#define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BASE -#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 128M */ - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS -#define CONFIG_SYS_PCIE1_MEM_VIRT CONFIG_SYS_PCIE1_MEM_BUS -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_BUS 0xe2000000 -#define CONFIG_SYS_PCIE1_IO_PHYS CONFIG_SYS_PCIE1_IO_BUS -#define CONFIG_SYS_PCIE1_IO_VIRT CONFIG_SYS_PCIE1_IO_BUS -#define CONFIG_SYS_PCIE1_IO_SIZE 0x1000000 /* 16M */ - -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS -#define CONFIG_SYS_PCIE2_MEM_VIRT CONFIG_SYS_PCIE2_MEM_BUS -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCIE2_IO_BUS 0xe3000000 -#define CONFIG_SYS_PCIE2_IO_PHYS CONFIG_SYS_PCIE2_IO_BUS -#define CONFIG_SYS_PCIE2_IO_VIRT CONFIG_SYS_PCIE2_IO_BUS -#define CONFIG_SYS_PCIE2_IO_SIZE 0x1000000 /* 16M */ - -#if defined(CONFIG_PCI) - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#undef CONFIG_EEPRO100 -#undef CONFIG_TULIP - -#if !defined(CONFIG_PCI_PNP) - #define PCI_ENET0_IOADDR 0xe0000000 - #define PCI_ENET0_MEMADDR 0xe0000000 - #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ -#endif - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#define CONFIG_DOS_PARTITION -#undef CONFIG_SCSI_AHCI - -#ifdef CONFIG_SCSI_AHCI -#define CONFIG_SATA_ULI5288 -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) -#define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE -#endif - -#endif /* CONFIG_PCI */ - -#if defined(CONFIG_TSEC_ENET) - -/* #define CONFIG_MII 1 */ /* MII PHY management */ - -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" -#define CONFIG_TSEC4 1 -#define CONFIG_TSEC4_NAME "eTSEC4" - -#define TSEC1_PHY_ADDR 0x1F -#define TSEC2_PHY_ADDR 0x00 -#define TSEC3_PHY_ADDR 0x01 -#define TSEC4_PHY_ADDR 0x02 -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#define TSEC4_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT -#define TSEC3_FLAGS TSEC_GIGABIT -#define TSEC4_FLAGS TSEC_GIGABIT - -#define CONFIG_SYS_TBIPA_VALUE 0x1e /* Set TBI address not to conflict with TSEC1_PHY_ADDR */ - -#define CONFIG_ETHPRIME "eTSEC1" - -#endif /* CONFIG_TSEC_ENET */ - -/* - * BAT0 2G Cacheable, non-guarded - * 0x0000_0000 2G DDR - */ -#define CONFIG_SYS_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE ) -#define CONFIG_SYS_IBAT0U CONFIG_SYS_DBAT0U - -/* - * BAT1 1G Cache-inhibited, guarded - * 0x8000_0000 512M PCI-Express 1 Memory - * 0xa000_0000 512M PCI-Express 2 Memory - * Changed it for operating from 0xd0000000 - */ -#define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U - -/* - * BAT2 512M Cache-inhibited, guarded - * 0xc000_0000 512M RapidIO Memory - */ -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U - -/* - * BAT3 4M Cache-inhibited, guarded - * 0xf800_0000 4M CCSR - */ -#define CONFIG_SYS_DBAT3L ( CONFIG_SYS_CCSRBAR | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U (CONFIG_SYS_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U - -#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) -#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ - | BATL_PP_RW | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \ - | BATU_BL_1M | BATU_VS | BATU_VP) -#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ - | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU -#endif - -/* - * BAT4 32M Cache-inhibited, guarded - * 0xe200_0000 16M PCI-Express 1 I/O - * 0xe300_0000 16M PCI-Express 2 I/0 - * Note that this is at 0xe0000000 - */ -#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U - -/* - * BAT5 128K Cacheable, non-guarded - * 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory) - */ -#define CONFIG_SYS_DBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT5L CONFIG_SYS_DBAT5L -#define CONFIG_SYS_IBAT5U CONFIG_SYS_DBAT5U - -/* - * BAT6 32M Cache-inhibited, guarded - * 0xfe00_0000 32M FLASH - */ -#define CONFIG_SYS_DBAT6L ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT6U ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT6L ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U CONFIG_SYS_DBAT6U - -/* Map the last 1M of flash where we're running from reset */ -#define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY - -#define CONFIG_SYS_DBAT7L 0x00000000 -#define CONFIG_SYS_DBAT7U 0x00000000 -#define CONFIG_SYS_IBAT7L 0x00000000 -#define CONFIG_SYS_IBAT7U 0x00000000 - -/* - * Environment - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) -#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ -#define CONFIG_ENV_SIZE 0x2000 - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ - -/* Cache Configuration */ -#define CONFIG_SYS_DCACHE_SIZE 32768 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ -#endif - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Environment Configuration - */ - -#define CONFIG_HAS_ETH0 1 -#define CONFIG_HAS_ETH1 1 -#define CONFIG_HAS_ETH2 1 -#define CONFIG_HAS_ETH3 1 - -#define CONFIG_IPADDR 192.168.0.50 - -#define CONFIG_HOSTNAME sbc8641d -#define CONFIG_ROOTPATH "/opt/eldk/ppc_74xx" -#define CONFIG_BOOTFILE "uImage" - -#define CONFIG_SERVERIP 192.168.0.2 -#define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_NETMASK 255.255.255.0 - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=uRamdisk\0" \ - "dtbaddr=400000\0" \ - "dtbfile=sbc8641d.dtb\0" \ - "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ - "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ - "maxcpus=1" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr - $dtbaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr $ramdiskaddr $dtbaddr" - -#define CONFIG_FLASHBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "bootm ffd00000 ffb00000 ffa00000" - -#define CONFIG_BOOTCOMMAND CONFIG_FLASHBOOTCOMMAND - -#endif /* __CONFIG_H */