
Hi Tom,
On Tue, Jun 23, 2015 at 11:45 AM, Bin Meng bmeng.cn@gmail.com wrote:
Currently PCI expansion ROM address is assigned by a call to pciauto_setup_rom() outside of the pci auto config process. This does not work when expansion ROM is on a device behind PCI bridge where bridge's memory limit register was already programmed to a value that does not cover the newly assigned expansion ROM address. To fix this, we should configure the ROM address during the auto config process.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
Changes in v2:
- Handle header type 1 ROM address programming
drivers/pci/pci_auto.c | 48 ++++++++++++++++++++++-------------------------- drivers/pci/pci_rom.c | 5 ----- include/pci.h | 9 --------- 3 files changed, 22 insertions(+), 40 deletions(-)
diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index 7c10983..e034ed1 100644 --- a/drivers/pci/pci_auto.c +++ b/drivers/pci/pci_auto.c @@ -87,6 +87,8 @@ void pciauto_setup_device(struct pci_controller *hose, pci_size_t bar_size; u16 cmdstat = 0; int bar, bar_nr = 0;
u8 header_type;
int rom_addr;
#ifndef CONFIG_PCI_ENUM_ONLY pci_addr_t bar_value; struct pci_region *bar_res; @@ -182,38 +184,32 @@ void pciauto_setup_device(struct pci_controller *hose, bar_nr++; }
/* Configure the expansion ROM address */
pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
if (header_type != PCI_HEADER_TYPE_CARDBUS) {
rom_addr = (header_type == PCI_HEADER_TYPE_NORMAL) ?
PCI_ROM_ADDRESS : PCI_ROM_ADDRESS1;
pci_hose_write_config_dword(hose, dev, rom_addr, 0xfffffffe);
pci_hose_read_config_dword(hose, dev, rom_addr, &bar_response);
if (bar_response) {
bar_size = -(bar_response & ~1);
DEBUGF("PCI Autoconfig: ROM, size=%#x, ", bar_size);
if (pciauto_region_allocate(mem, bar_size,
&bar_value) == 0) {
pci_hose_write_config_dword(hose, dev, rom_addr,
bar_value);
}
cmdstat |= PCI_COMMAND_MEMORY;
DEBUGF("\n");
}
}
pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat); pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, CONFIG_SYS_PCI_CACHE_LINE_SIZE); pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
}
-int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev) -{
pci_addr_t bar_value;
pci_size_t bar_size;
u32 bar_response;
u16 cmdstat = 0;
pci_hose_write_config_dword(hose, dev, PCI_ROM_ADDRESS, 0xfffffffe);
pci_hose_read_config_dword(hose, dev, PCI_ROM_ADDRESS, &bar_response);
if (!bar_response)
return -ENOENT;
bar_size = -(bar_response & ~1);
DEBUGF("PCI Autoconfig: ROM, size=%#x, ", bar_size);
if (pciauto_region_allocate(hose->pci_mem, bar_size, &bar_value) == 0) {
pci_hose_write_config_dword(hose, dev, PCI_ROM_ADDRESS,
bar_value);
}
DEBUGF("\n");
pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
cmdstat |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat);
return 0;
-}
void pciauto_prescan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus) { diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c index 37450c8..f364799 100644 --- a/drivers/pci/pci_rom.c +++ b/drivers/pci/pci_rom.c @@ -83,11 +83,6 @@ static int pci_rom_probe(pci_dev_t dev, uint class, rom_address = CONFIG_X86_OPTION_ROM_ADDR; #else
if (pciauto_setup_rom(pci_bus_to_hose(PCI_BUS(dev)), dev)) {
debug("Cannot find option ROM\n");
return -ENOENT;
}
pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_address); if (rom_address == 0x00000000 || rom_address == 0xffffffff) { debug("%s: rom_address=%x\n", __func__, rom_address);
diff --git a/include/pci.h b/include/pci.h index 07b1e9a..966be97 100644 --- a/include/pci.h +++ b/include/pci.h @@ -712,15 +712,6 @@ void pci_write_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum, u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum);
/**
- pciauto_setup_rom() - Set up access to a device ROM
- @hose: PCI hose to use
- @dev: PCI device to adjust
- @return 0 if done, -ve on error
- */
-int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev);
-/**
- pci_hose_find_devices() - Find devices by vendor/device ID
- @hose: PCI hose to search
--
Ping?
Regards, Bin