Hi all,
I am using u-boot version 1.3.0 included in freescale LTIB released for MPC8313ERDB custom board. I tried NAND booting of MPC8313ERDB board using this u-boot and it worked fine.
Using similar procedure i tried NAND boot on my custom board but it dint work :(
My board has large page NAND where as MPC8313ERDB has small page NAND. I have modified all the parameters required for Large page NAND. It prints initail debug message as shown below and then while copying u-boot code from NAND to DDR it detects NAND blocks as bad block and continuously prints 'B' on Console.
NAND SPL - U-Boot 1.3.0 (Jul 30 2009 - 06:33:05) MPC83XX Loading from NAND : BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
Can any one please tell what could be going wrong? Am i missing something in large page NAND initialization?
thanks Rupesh