Hi Abel,
There is not really reducing codesize here since there is only a call.
Yes, I also haven't observed any change.
The function is always built in if CONFIG_$(SPL_TPL_)FIT is set. Plus, there was a change in behavior if CONFIG_SPL_OS_BOOT is defined. If CONFIG_FIT_IMAGE_TINY is defined, the spl_fit_image_get_os was returning -ENOTSUPP and then if CONFIG_SPL_OS_BOOT was also defined, the spl_image->os was left set to 0 which in turn was skipping the fdt appending resulting in boot-up failure.
Fixes: 337bbb6297775e spl: fit: add SPL_FIT_IMAGE_TINY config to reduce code-size Signed-off-by: Abel Vesa abel.vesa@nxp.com
However, this commit fixes the issue (the board didn't hang anymore after SPL loading), hence
Tested-by: Lukasz Majewski lukma@denx.de
I've tested it on mccmon6 HW (imx6q).
Just to share - for me CONFIG_USE_TINY_PRINTF=y gave reduction of SPL size from 38KiB to 34KiB.
Thanks for your commit.
common/spl/spl_fit.c | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index db43626..a87d02d 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -333,11 +333,7 @@ static int spl_fit_record_loadable(const void *fit, int images, int index, static int spl_fit_image_get_os(const void *fit, int noffset, uint8_t *os) { -#if CONFIG_IS_ENABLED(FIT_IMAGE_TINY)
- return -ENOTSUPP;
-#else return fit_image_get_os(fit, noffset, os); -#endif }
int spl_load_simple_fit(struct spl_image_info *spl_image,
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de