On 10/13/22 22:05, Icenowy Zheng wrote:
This kind of read command is utilized in SPI NANDs for reading data inside a selected page, which is obviously smaller than how much 2 byte address can address. So 2 bytes are used for the address and one dummy byte is needed after the real address. As the address is sent out in bit endian, this makes it not compatible with usual 3 byte address.
typo: big
Signed-off-by: Icenowy Zheng uwu@icenowy.me
arch/arm/mach-sunxi/spl_spi_sunxi.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-)
Reviewed-by: Samuel Holland samuel@sholland.org Tested-by: Samuel Holland samuel@sholland.org # Orange Pi Zero Plus
diff --git a/arch/arm/mach-sunxi/spl_spi_sunxi.c b/arch/arm/mach-sunxi/spl_spi_sunxi.c index 7975457758..88c15a3ee9 100644 --- a/arch/arm/mach-sunxi/spl_spi_sunxi.c +++ b/arch/arm/mach-sunxi/spl_spi_sunxi.c @@ -305,7 +305,7 @@ static void spi0_xfer(const u8 *txbuf, u32 txlen, u8 *rxbuf, u32 rxlen) } }
-static void spi0_read_data(void *buf, u32 addr, u32 len) +static void spi0_read_data(void *buf, u32 addr, u32 len, u32 addr_len) { u8 *buf8 = buf; u32 chunk_len; @@ -316,9 +316,15 @@ static void spi0_read_data(void *buf, u32 addr, u32 len)
/* Configure the Read Data Bytes (03h) command header */ txbuf[0] = 0x03;
txbuf[1] = (u8)(addr >> 16);txbuf[2] = (u8)(addr >> 8);txbuf[3] = (u8)(addr);
if (addr_len == 3) {txbuf[1] = (u8)(addr >> 16);txbuf[2] = (u8)(addr >> 8);txbuf[3] = (u8)(addr);} else if (addr_len == 2) {txbuf[1] = (u8)(addr >> 8);txbuf[2] = (u8)(addr);txbuf[3] = 0; /* dummy */}if (chunk_len > SPI_READ_MAX_SIZE) chunk_len = SPI_READ_MAX_SIZE;
@@ -337,7 +343,7 @@ static void spi0_read_data(void *buf, u32 addr, u32 len) static ulong spi_load_read(struct spl_load_info *load, ulong sector, ulong count, void *buf) {
- spi0_read_data(buf, sector, count);
spi0_read_data(buf, sector, count, 3);
return count;
} @@ -356,7 +362,7 @@ static int spl_spi_load_image(struct spl_image_info *spl_image,
spi0_init();
- spi0_read_data((void *)header, load_offset, 0x40);
spi0_read_data((void *)header, load_offset, 0x40, 3);
if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&image_get_magic(header) == FDT_MAGIC) {
@@ -376,7 +382,7 @@ static int spl_spi_load_image(struct spl_image_info *spl_image, return ret;
spi0_read_data((void *)spl_image->load_addr,
load_offset, spl_image->size);
load_offset, spl_image->size, 3);}
spi0_deinit();