In both the Freescale DDR controller and the SPD spec, bank address bits are stored as the number of bank address bits minus 2. For example, if a chip had 8 banks (3 total bank address bits), the value of bank_addr_bits would be 1. This is rather surprising for users configuring their memory manually, since they can't set bank_addr_bits to the actual number of bank address bits. Rectify this.
There is at least one example of this kind of mistake already, in board/freescale/t102xrdb/ddr.c. The documented MT40A512M8HX has two bank address bits, but bank_addr_bits was set to 2, implying 4 bank address bits. Such a value is reserved in BA_BITS_CS, but I suspect the controller simply ignores the top bit, making this kind of mistake harmless, if misleading.
Fixes: e8a7f1c32b5 ("powerpc/t1023rdb: Add T1023 RDB board support") Signed-off-by: Sean Anderson sean.anderson@seco.com ---
board/freescale/ls1043ardb/ddr.c | 2 +- drivers/ddr/fsl/ctrl_regs.c | 2 +- drivers/ddr/fsl/ddr4_dimm_params.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c index 08b43ff5e4c..4d2fce38412 100644 --- a/board/freescale/ls1043ardb/ddr.c +++ b/board/freescale/ls1043ardb/ddr.c @@ -114,7 +114,7 @@ dimm_params_t ddr_raw_timing = { .mirrored_dimm = 0, .n_row_addr = 15, .n_col_addr = 10, - .bank_addr_bits = 0, + .bank_addr_bits = 2, .bank_group_bits = 2, .edc_config = 0, .burst_lengths_bitmask = 0x0c, diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index b5122d1a1c3..0b0b4e5cb7e 100644 --- a/drivers/ddr/fsl/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -214,7 +214,7 @@ static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr, odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg; odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg; #ifdef CONFIG_SYS_FSL_DDR4 - ba_bits_cs_n = dimm_params[dimm_number].bank_addr_bits; + ba_bits_cs_n = dimm_params[dimm_number].bank_addr_bits - 2; bg_bits_cs_n = dimm_params[dimm_number].bank_group_bits; #else n_banks_per_sdram_device diff --git a/drivers/ddr/fsl/ddr4_dimm_params.c b/drivers/ddr/fsl/ddr4_dimm_params.c index e2bdc12ef2c..ea791622628 100644 --- a/drivers/ddr/fsl/ddr4_dimm_params.c +++ b/drivers/ddr/fsl/ddr4_dimm_params.c @@ -246,7 +246,7 @@ unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, /* SDRAM device parameters */ pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12; pdimm->n_col_addr = (spd->addressing & 0x7) + 9; - pdimm->bank_addr_bits = (spd->density_banks >> 4) & 0x3; + pdimm->bank_addr_bits = ((spd->density_banks >> 4) & 0x3) + 2; pdimm->bank_group_bits = (spd->density_banks >> 6) & 0x3;
/*