Hi Harald,
On Tue, 12 Jul 2022 at 05:58, Harald Seiler hws@denx.de wrote:
Hi Simon,
On Tue, 2022-07-12 at 04:58 -0600, Simon Glass wrote:
Hi Harald,
On Wed, 6 Jul 2022 at 05:19, Harald Seiler hws@denx.de wrote:
Add a config-option which forces the console to stay silent until the proper environment is loaded from flash.
This is important when the default environment does not silence the console but no output must be printed when 'silent' is set in the flash environment.
After the environment from flash is loaded, the console will be silenced/unsilenced depending on it. If PRE_CONSOLE_BUFFER is also used, the buffer will now be flushed if the console should not be silenced.
Signed-off-by: Harald Seiler hws@denx.de
common/Kconfig | 10 ++++++++++ common/console.c | 5 +++++ 2 files changed, 15 insertions(+)
This seems OK to me. You might want to implement the silent-console device tree property in console_update_silent() too, which was dropped in the conversion to driver model.
This looks interesting, I'll have to look into it.
Do you know if there's any effort towards supporting such a flag in the kernel as well? I had to remove the serial console property from my DT and instead pass console info via cmdline to make the silent console work. A "pure DT" solution of any sort would have been nicer of course...
The console's 'silent' flag is propagated to Linux by dropping the 'console=' text from the bootargs. See fixup_silent_linux().
Regards, Simon
-- Harald