From: Samuel Egli samuel.egli@siemens.com
- dxr2: define unused pins as input - do not enable RTC32K OSC on dxr2 board - update default environment - add splashpos=m,m to default environment, so splash screen is always centered. - adapt environment for bootcount feature - add altbootcmd to default environment - rut: SPL add early reset pulse for eth-phy, maXTouch and display - rut: display timing aenderungen - siemens boards: adapt for background color = white - add boutcount feature for the siemens boards store the bootcount in the environment, as we have no softreset save registers on this hardware. Use therefore the CONFIG_BOOTCOUNT_ENV bootcount driver. - change spi mode from 3 to 0 for the lcd init - add gpio pin for lcd reset with state 0 and add mdelay - siemens boards: use own USB id's - add dfu serial and device number for siemens boards Add for the siemens boards the possibility to define in dfu mode, the iSerialNumber and the bcdDevice fields in the USB Device descriptor. - fix upgrade mechanism based on bootcount Correct location of saveenv and remove not active variable.
Add CONFIG_BOOT_RETRY_TIME and CONFIG_RESET_TO_RETRY to reboot board in case of empty kernel partition. Without these defines an empty kernel partition leads to an abort of boot process and one remains in u-boot prompt.
- general cleanup of dxr2, pxm2 and rut boards all: * Remove net boot from bootcmd Ping can cause a crash on boards without ethernet phy. net_nfs command is used only for development
* Add reset at the end of bootcmd In order to have an immediate reset of the boot when bootcmd fails, add reset at the end of bootcmd.
rut: * add nand_img_size
dxr2: * update nand_img_size
* ddr3 timings updated with iocontrol property that can be modified via eeprom. New default parameters from software leveling with draco ES2.
Signed-off-by: Samuel Egli samuel.egli@siemens.com Signed-off-by: Pascal Bach pascal.bach@siemens.com Signed-off-by: Roger Meier r.meier@siemens.com Signed-off-by: Heiko Schocher hs@denx.de Cc: Matthias Michel matthias.michel@siemens.com Cc: Tom Rini trini@ti.com --- board/siemens/common/factoryset.c | 27 +++++- board/siemens/common/factoryset.h | 4 + board/siemens/dxr2/board.c | 11 +-- board/siemens/dxr2/board.h | 9 +- board/siemens/dxr2/mux.c | 158 +++++++++++++++++++++++++++++++++ board/siemens/pxm2/board.c | 3 +- board/siemens/rut/board.c | 51 +++++++++-- include/configs/dxr2.h | 13 ++- include/configs/pxm2.h | 7 +- include/configs/rut.h | 10 ++- include/configs/siemens-am33x-common.h | 70 +++++++++++---- 11 files changed, 311 insertions(+), 52 deletions(-)
diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c index eda9141..cbc31e6 100644 --- a/board/siemens/common/factoryset.c +++ b/board/siemens/common/factoryset.c @@ -15,7 +15,8 @@ #include <asm/arch/sys_proto.h> #include <asm/unaligned.h> #include <net.h> -#include <usbdescriptors.h> +#include <errno.h> +#include <g_dnl.h> #include "factoryset.h"
#define EEPR_PG_SZ 0x80 @@ -224,8 +225,22 @@ int factoryset_read_eeprom(int i2c_addr) MAX_STRING_LENGTH)) { debug("display name: %s\n", factory_dat.disp_name); } - #endif +#if defined(CONFIG_G_DNL_SERIAL_STRING) + if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV", + (uchar *)"num", factory_dat.serial, + MAX_STRING_LENGTH)) { + debug("serial number: %s\n", factory_dat.serial); + } +#endif + if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV", + (uchar *)"ver", buf, + MAX_STRING_LENGTH)) { + factory_dat.version = simple_strtoul((char *)buf, + NULL, 16); + debug("version number: %d\n", factory_dat.version); + } + return 0;
err: @@ -279,6 +294,14 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev) { put_unaligned(factory_dat.usb_vendor_id, &dev->idVendor); put_unaligned(factory_dat.usb_product_id, &dev->idProduct); +#if defined(CONFIG_G_DNL_SERIAL_STRING) + g_dnl_set_serialnumber((char *)factory_dat.serial); +#endif return 0; } + +int g_dnl_get_board_bcd_device_number(int gcnum) +{ + return factory_dat.version; +} #endif /* defined(CONFIG_SPL_BUILD) */ diff --git a/board/siemens/common/factoryset.h b/board/siemens/common/factoryset.h index 445f384..bd53417 100644 --- a/board/siemens/common/factoryset.h +++ b/board/siemens/common/factoryset.h @@ -18,6 +18,10 @@ struct factorysetcontainer { #if defined(CONFIG_VIDEO) unsigned char disp_name[MAX_STRING_LENGTH]; #endif +#if defined(CONFIG_G_DNL_SERIAL_STRING) + unsigned char serial[MAX_STRING_LENGTH]; +#endif + int version; };
int factoryset_read_eeprom(int i2c_addr); diff --git a/board/siemens/dxr2/board.c b/board/siemens/dxr2/board.c index af9d84f..1773ab7 100644 --- a/board/siemens/dxr2/board.c +++ b/board/siemens/dxr2/board.c @@ -38,11 +38,11 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPL_BUILD static struct dxr2_baseboard_id __attribute__((section(".data"))) settings; - +/* @303MHz-i0 */ const struct ddr3_data ddr3_default = { - 0x33524444, 0x56312e33, 0x0100, 0x0001, 0x003A, 0x008A, 0x010B, - 0x00C4, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x0006, 0x61C04AB2, - 0x00000618, + 0x33524444, 0x56312e34, 0x0080, 0x0000, 0x0038, 0x003E, 0x00A4, + 0x0075, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32, + 0x00000618, 0x0000014A, };
static void set_default_ddr3_timings(void) @@ -73,6 +73,7 @@ static void print_ddr3_timings(void)
PRINTARGS(sdram_config); PRINTARGS(ref_ctrl); + PRINTARGS(ioctr_val); }
static void print_chip_data(void) @@ -168,7 +169,7 @@ struct cmd_control dxr2_ddr3_cmd_ctrl_data = { dxr2_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio; dxr2_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout;
- config_ddr(DDR_PLL_FREQ, DXR2_IOCTRL_VAL, &dxr2_ddr3_data, + config_ddr(DDR_PLL_FREQ, settings.ddr3.ioctr_val, &dxr2_ddr3_data, &dxr2_ddr3_cmd_ctrl_data, &dxr2_ddr3_emif_reg_data, 0); }
diff --git a/board/siemens/dxr2/board.h b/board/siemens/dxr2/board.h index 2be78fb..abf5432 100644 --- a/board/siemens/dxr2/board.h +++ b/board/siemens/dxr2/board.h @@ -22,11 +22,11 @@ #define MAGIC_CHIP 0x50494843
/* Automatic generated definition */ -/* Wed, 19 Jun 2013 10:57:48 +0200 */ -/* From file: draco/ddr3-data-micron.txt */ +/* Wed, 18 Sep 2013 18:58:27 +0200 */ +/* From file: draco/ddr3-data-micron-v2.txt */ struct ddr3_data { unsigned int magic; /* 0x33524444 */ - unsigned int version; /* 0x56312e33 */ + unsigned int version; /* 0x56312e34 */ unsigned short int ddr3_sratio; /* 0x0100 */ unsigned short int iclkout; /* 0x0001 */ unsigned short int dt0rdsratio0; /* 0x003A */ @@ -36,9 +36,10 @@ struct ddr3_data { unsigned int sdram_tim1; /* 0x0888A39B */ unsigned int sdram_tim2; /* 0x26247FDA */ unsigned int sdram_tim3; /* 0x501F821F */ - unsigned short int emif_ddr_phy_ctlr_1; /* 0x0006 */ + unsigned int emif_ddr_phy_ctlr_1; /* 0x00100206 */ unsigned int sdram_config; /* 0x61C04AB2 */ unsigned int ref_ctrl; /* 0x00000618 */ + unsigned int ioctr_val; /* 0x0000018B */ };
struct chip_data { diff --git a/board/siemens/dxr2/mux.c b/board/siemens/dxr2/mux.c index bc80b79..5c22999 100644 --- a/board/siemens/dxr2/mux.c +++ b/board/siemens/dxr2/mux.c @@ -63,6 +63,164 @@ static struct module_pin_mux gpios_pin_mux[] = { {OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | RXACTIVE)}, {OFFSET(gpmc_csn3), MODE(7) }, /* LED0 GPIO2_0 */ {OFFSET(emu0), MODE(7)}, /* LED1 GPIO3_7 */ + /* Triacs in HW Rev 2 */ + {OFFSET(uart1_ctsn), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y5 GPIO0_12*/ + {OFFSET(mmc0_dat1), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y3 GPIO2_28*/ + {OFFSET(mmc0_dat2), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y7 GPIO2_27*/ + /* Triacs initial HW Rev */ + {OFFSET(gpmc_csn1), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_30 Y0 */ + {OFFSET(gpmc_be1n), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_28 Y1 */ + {OFFSET(gpmc_csn2), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_31 Y2 */ + {OFFSET(lcd_data15), MODE(7) | RXACTIVE | PULLUDDIS}, /* 0_11 Y3 */ + {OFFSET(lcd_data14), MODE(7) | RXACTIVE | PULLUDDIS}, /* 0_10 Y4 */ + {OFFSET(gpmc_clk), MODE(7) | RXACTIVE | PULLUDDIS}, /* 2_1 Y5 */ + {OFFSET(emu1), MODE(7) | RXACTIVE | PULLUDDIS}, /* 3_8 Y6 */ + {OFFSET(gpmc_ad15), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_15 Y7 */ + /* Remaining pins that were not used in this file */ + {OFFSET(gpmc_ad8), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_ad9), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a2), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a3), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a4), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a5), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a6), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a7), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a8), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a9), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a10), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(gpmc_a11), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data2), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data3), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data4), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data5), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data6), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data7), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data8), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_data9), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_vsync), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_hsync), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_pclk), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(lcd_ac_bias_en), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mmc0_dat3), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mmc0_dat0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mmc0_clk), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mmc0_cmd), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(spi0_sclk), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(spi0_d0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(spi0_d1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(spi0_cs0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(uart0_ctsn), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(uart0_rtsn), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(uart1_rtsn), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(uart1_rxd), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(uart1_txd), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_aclkx), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_fsx), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_axr0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_ahclkr), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_aclkr), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_fsr), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_axr1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(mcasp0_ahclkx), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(xdma_event_intr0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(xdma_event_intr1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(nresetin_out), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(porz), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(nnmi), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(osc0_in), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(osc0_out), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(rsvd1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(tms), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(tdi), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(tdo), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(tck), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ntrst), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(osc1_in), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(osc1_out), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(pmic_power_en), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(rtc_porz), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(rsvd2), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ext_wakeup), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(enz_kaldo_1p8v), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb0_dm), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb0_dp), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb0_ce), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb0_id), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb0_vbus), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb0_drvvbus), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb1_dm), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb1_dp), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb1_ce), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb1_id), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb1_vbus), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(usb1_drvvbus), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_resetn), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_csn0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_cke), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_ck), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_nck), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_casn), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_rasn), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_wen), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_ba0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_ba1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_ba2), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a2), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a3), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a4), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a5), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a6), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a7), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a8), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a9), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a10), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a11), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a12), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a13), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a14), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_a15), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_odt), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d2), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d3), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d4), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d5), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d6), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d7), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d8), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d9), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d10), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d11), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d12), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d13), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d14), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_d15), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_dqm0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_dqm1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_dqs0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_dqsn0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_dqs1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_dqsn1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_vref), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_vtp), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_strben0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ddr_strben1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain7), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain6), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain5), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain4), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain3), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain2), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain1), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(ain0), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(vrefp), MODE(7) | RXACTIVE | PULLUDDIS}, + {OFFSET(vrefn), MODE(7) | RXACTIVE | PULLUDDIS}, {-1}, };
diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c index 2c1841f..094b4d6 100644 --- a/board/siemens/pxm2/board.c +++ b/board/siemens/pxm2/board.c @@ -413,8 +413,7 @@ static int conf_disp_pll(int m, int n)
static int board_video_init(void) { - /* set 300 MHz */ - conf_disp_pll(25, 2); + conf_disp_pll(24, 1); if (factory_dat.pxm50) da8xx_video_init(&lcd_panels[0], &lcd_cfg, lcd_cfg.bpp); else diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c index 5de8fc6..0cf17ef 100644 --- a/board/siemens/rut/board.c +++ b/board/siemens/rut/board.c @@ -83,9 +83,48 @@ struct cmd_control rut_ddr3_cmd_ctrl_data = { &rut_ddr3_cmd_ctrl_data, &rut_ddr3_emif_reg_data, 0); }
+static int request_and_pulse_reset(int gpio, const char *name) +{ + int ret; + const int delay_us = 2000; /* 2ms */ + + ret = gpio_request(gpio, name); + if (ret < 0) { + printf("%s: Unable to request %s\n", __func__, name); + goto err; + } + + ret = gpio_direction_output(gpio, 0); + if (ret < 0) { + printf("%s: Unable to set %s as output\n", __func__, name); + goto err_free_gpio; + } + + udelay(delay_us); + + gpio_set_value(gpio, 1); + + return 0; + +err_free_gpio: + gpio_free(gpio); +err: + return ret; +} + +#define GPIO_TO_PIN(bank, gpio) (32 * (bank) + (gpio)) +#define ETH_PHY_RESET_GPIO GPIO_TO_PIN(2, 18) +#define MAXTOUCH_RESET_GPIO GPIO_TO_PIN(3, 18) +#define DISPLAY_RESET_GPIO GPIO_TO_PIN(3, 19) + +#define REQUEST_AND_PULSE_RESET(N) \ + request_and_pulse_reset(N, #N); + static void spl_siemens_board_init(void) { - return; + REQUEST_AND_PULSE_RESET(ETH_PHY_RESET_GPIO); + REQUEST_AND_PULSE_RESET(MAXTOUCH_RESET_GPIO); + REQUEST_AND_PULSE_RESET(DISPLAY_RESET_GPIO); } #endif /* if def CONFIG_SPL_BUILD */
@@ -336,7 +375,6 @@ int clk_get(int clk) static int conf_disp_pll(int m, int n) { struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; - struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; struct dpll_params dpll_lcd = {m, n, -1, -1, -1, -1, -1}; #if defined(DISPL_PLL_SPREAD_SPECTRUM) struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; @@ -353,8 +391,6 @@ static int conf_disp_pll(int m, int n) 0 }; do_enable_clocks(clk_domains, clk_modules_explicit_en, 1); - /* 0x44e0_0500 write lcdc pixel clock mux Linux hat hier 0 */ - writel(0x0, &cmdpll->clklcdcpixelclk);
do_setup_dpll(&dpll_lcd_regs, &dpll_lcd);
@@ -380,10 +416,13 @@ static int enable_lcd(void) { unsigned char buf[1];
+ set_gpio(BOARD_LCD_RESET, 0); + mdelay(1); set_gpio(BOARD_LCD_RESET, 1); + mdelay(1);
/* spi lcd init */ - kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_3); + kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_0);
/* backlight on */ buf[0] = 0xf; @@ -418,7 +457,7 @@ static int board_video_init(void) printf("%s: %s not found, using default %s\n", __func__, factory_dat.disp_name, lcd_panels[i].name); } - conf_disp_pll(25, 2); + conf_disp_pll(24, 1); da8xx_video_init(&lcd_panels[display], &lcd_cfgs[display], lcd_cfgs[display].bpp);
diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h index cd553ec..1e42f5c 100644 --- a/include/configs/dxr2.h +++ b/include/configs/dxr2.h @@ -21,8 +21,8 @@
#define CONFIG_SYS_MPUCLK 275 #define DXR2_IOCTRL_VAL 0x18b -#define DDR_PLL_FREQ 266 -#define CONFIG_SPL_AM33XX_DO_NOT_ENABLE_RTC32K +#define DDR_PLL_FREQ 303 +#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
#define BOARD_DFU_BUTTON_GPIO 27 #define BOARD_DFU_BUTTON_LED 64 @@ -62,7 +62,7 @@ /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=dxr2\0" \ - "nand_img_size=0x300000\0" \ + "nand_img_size=0x400000\0" \ "optargs=\0" \ CONFIG_COMMON_ENV_SETTINGS
@@ -75,10 +75,9 @@ "run dfu_start; " \ "reset; " \ "fi;" \ -"if ping ${serverip}; then " \ - "run net_nfs; " \ -"fi;" \ -"run nand_boot;" +"run nand_boot;" \ +"reset;" +
#else #define CONFIG_BOOTDELAY 0 diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index 20b0f9a..7722f7b 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -70,6 +70,7 @@ "hostname=pxm2\0" \ "nand_img_size=0x500000\0" \ "optargs=\0" \ + "splashpos=m,m\0" \ CONFIG_COMMON_ENV_SETTINGS \ "mmc_dev=0\0" \ "mmc_root=/dev/mmcblk0p2 rw\0" \ @@ -118,9 +119,7 @@ "fi;" \ "fi;" \ "run nand_boot;" \ - "if ping ${serverip}; then " \ - "run net_nfs; " \ - "fi; " + "reset;"
#else #define CONFIG_BOOTDELAY 0 @@ -148,6 +147,8 @@ #define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE #define PWM_TICKS 0x1388 #define PWM_DUTY 0x200 +#define CONFIG_SYS_CONSOLE_BG_COL 0xff +#define CONFIG_SYS_CONSOLE_FG_COL 0x00 #endif
#endif /* ! __CONFIG_PXM2_H */ diff --git a/include/configs/rut.h b/include/configs/rut.h index 7c94644..d4519f9 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -65,7 +65,8 @@ /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=rut\0" \ - "splashpos=488,352\0" \ + "nand_img_size=0x500000\0" \ + "splashpos=m,m\0" \ "optargs=fixrtc --no-log consoleblank=0 \0" \ CONFIG_COMMON_ENV_SETTINGS \ "mmc_dev=0\0" \ @@ -111,9 +112,7 @@ "fi;" \ "fi;" \ "run nand_boot;" \ - "if ping ${serverip}; then " \ - "run net_nfs; " \ - "fi; " + "reset;"
#else #define CONFIG_BOOTDELAY 0 @@ -151,6 +150,9 @@ #define BOARD_LCD_RESET 115 /* Bank 3 pin 19 */ #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_FORMIKE +#define DISPL_PLL_SPREAD_SPECTRUM +#define CONFIG_SYS_CONSOLE_BG_COL 0xff +#define CONFIG_SYS_CONSOLE_FG_COL 0x00 #endif
#endif /* ! __CONFIG_RUT_H */ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 03c143d..3b52e66 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -255,17 +255,18 @@ #define CONFIG_USB_GADGET #define CONFIG_USBDOWNLOAD_GADGET
-/* USB TI's IDs */ +/* USB DRACO ID as default */ #define CONFIG_USBD_HS -#define CONFIG_G_DNL_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_PRODUCT_NUM 0x4a47 -#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" +#define CONFIG_G_DNL_VENDOR_NUM 0x0908 +#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2 +#define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
/* USB Device Firmware Update support */ #define CONFIG_DFU_FUNCTION #define CONFIG_DFU_NAND #define CONFIG_CMD_DFU #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) +#define CONFIG_G_DNL_SERIAL_STRING 32
#endif /* CONFIG_SPL_BUILD */
@@ -359,31 +360,38 @@ #define CONFIG_COMMON_ENV_SETTINGS \ "verify=no \0" \ "project_dir=systemone\0" \ + "upgrade_available=0\0" \ + "altbootcmd=run bootcmd\0" \ + "bootlimit=3\0" \ + "partitionset_active=A\0" \ "loadaddr=0x82000000\0" \ "kloadaddr=0x81000000\0" \ "script_addr=0x81900000\0" \ - "console=console=ttyMTD,mtdoops console=ttyO0,115200n8\0" \ - "active_set=a\0" \ + "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \ "nand_active_ubi_vol=rootfs_a\0" \ + "nand_active_ubi_vol_A=rootfs_a\0" \ + "nand_active_ubi_vol_B=rootfs_b\0" \ "nand_root_fs_type=ubifs rootwait=1\0" \ "nand_src_addr=0x280000\0" \ - "nand_src_addr_a=0x280000\0" \ - "nand_src_addr_b=0x780000\0" \ + "nand_src_addr_A=0x280000\0" \ + "nand_src_addr_B=0x780000\0" \ "nfsopts=nolock rw mem=128M\0" \ "ip_method=none\0" \ "bootenv=uEnv.txt\0" \ "bootargs_defaults=setenv bootargs " \ "console=${console} " \ + "${testargs} " \ "${optargs}\0" \ "nand_args=run bootargs_defaults;" \ "mtdparts default;" \ - "setenv nand_active_ubi_vol rootfs_${active_set};" \ - "setenv ${active_set} true;" \ - "if test -n ${a}; then " \ - "setenv nand_src_addr ${nand_src_addr_a};" \ + "setenv ${partitionset_active} true;" \ + "if test -n ${A}; then " \ + "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \ + "setenv nand_src_addr ${nand_src_addr_A};" \ "fi;" \ - "if test -n ${b}; then " \ - "setenv nand_src_addr ${nand_src_addr_b};" \ + "if test -n ${B}; then " \ + "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \ + "setenv nand_src_addr ${nand_src_addr_B};" \ "fi;" \ "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ "ubi.mtd=9,2048;" \ @@ -404,9 +412,26 @@ "setenv bootargs ${bootargs} " \ "root=/dev/nfs ${mtdparts} " \ "nfsroot=${serverip}:${rootpath},${nfsopts} " \ - "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \ + "ip=${ipaddr}:${serverip}:" \ "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ - "nand_boot=echo Booting from nand, active set ${active_set} ...; " \ + "nand_boot=echo Booting from nand; " \ + "if test ${upgrade_available} -eq 1; then " \ + "if test ${bootcount} -gt ${bootlimit}; " \ + "then " \ + "setenv upgrade_available 0;" \ + "setenv ${partitionset_active} true;" \ + "if test -n ${A}; then " \ + "setenv partitionset_active B; " \ + "env delete A; " \ + "fi;" \ + "if test -n ${B}; then " \ + "setenv partitionset_active A; " \ + "env delete B; " \ + "fi;" \ + "saveenv; " \ + "fi;" \ + "fi;" \ + "echo set ${partitionset_active}...;" \ "run nand_args; " \ "nand read.i ${kloadaddr} ${nand_src_addr} " \ "${nand_img_size}; bootm ${kloadaddr}\0" \ @@ -415,7 +440,7 @@ "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ "bootm ${kloadaddr}\0" \ "flash_self=run nand_boot\0" \ - "flash_self_test=setenv bootargs_defaults ${bootargs_defaults} test; " \ + "flash_self_test=setenv testargs test; " \ "run nand_boot\0" \ "dfu_start=echo Preparing for dfu mode ...; " \ "run dfu_args; \0" \ @@ -426,8 +451,9 @@ "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \ "from memory and root filesystem over NFS; echo Type " \ "'run net_nfs' to get Kernel over TFTP and mount root " \ - "filesystem over NFS; echo Set active_set variable to 'a' " \ - "or 'b' to select kernel and rootfs partition; " \ + "filesystem over NFS; " \ + "echo Set partitionset_active variable to 'A' " \ + "or 'B' to select kernel and rootfs partition; " \ "echo" \ "\0"
@@ -457,4 +483,10 @@ #define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \ "press "<Esc><Esc>" to stop\n", bootdelay
+/* Reboot after 60 sec if bootcmd fails */ +#define CONFIG_RESET_TO_RETRY +#define CONFIG_BOOT_RETRY_TIME 60 + +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_BOOTCOUNT_ENV #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */