Re: [U-Boot] [PATCH] arm: at91: gardena-smart-gateway-at91sam: Enable CONFIG_SYS_NAND_USE_FLASH_BBT

Hei hei,

Am Dienstag, 27. August 2019, 08:14:50 CEST schrieb Stefan Roese:

This patch enables the BBT in NAND on the AT91SAM based GARDENA smart Gateway. This is especially important, since the Linux driver also enables this option and uses the BBT table pages. Without setting this option, U-Boot will try to re-use these pages again (e.g. UBI).

Does the Linux kernel driver use those unconditionally or is that a kernel config option? Which one? (Search in 5.2 kernel config for BBT is inconclusive.)

Greets Alex